Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Capillary filling"”.

  1. Capillary Filling of Large Aspect Ratio Channels With Varying Wall Spacing

    Quantification and prediction of capillary fluid flow in planar nanochannels is essential to the development of many emerging nanofluidic technologies. Planar nanochannels are typically produced using the standard nanofabrication processes of thermal bonding or sacrificial etching. Both approaches …

    byu Repository record for Capillary Filling of Large Aspect Ratio Channels With Varying Wall Spacing (opens in a new tab) Download PDF for Capillary Filling of Large Aspect Ratio Channels With Varying Wall Spacing (opens in a new tab)

  2. Improving Outcomes by Improving Practice: Evidence-Based Assessment, Prevention and Documentation of Pressure Ulcers In the ICU.

    … of an individual against a surface exceeds the capillary filling pressure for a period even as short as two hours, necrosis and ulceration can begin. Shear and friction are other forces that contribute to pressure ulcer development. These forces cause tiny tears and ruptures as pressures exceed …

    south-carolina Repository record for Improving Outcomes by Improving Practice: Evidence-Based Assessment, Prevention and Documentation of Pressure Ulcers In the ICU. (opens in a new tab)

  3. Thin film technology for chemical sensors

    … its naturally hydrophobic state, thus preventing capillary filling, this plasma treatment enables capillary filling even after extended periods of storage. The gas sensor is a microhotplate (MHP) device, utilizing a tin dioxide sensing layer deposited by ALD for the first time in a MHP sensor. …

    aalto Repository record for Thin film technology for chemical sensors (opens in a new tab)

  4. Optimizing Heat Pipes With Partially-Hybrid Mesh-Groove Wicking Structures and Its Capillary-Flowing Analysis by Simulation

    … wick and fully hybrid wick. The highly efficient capillary evaporation enabled by the mesh-groove hybrid wick is the main factor. However, such hybrid wick cannot be applied in the condensation section owing to thick liquid film confined by the hybrid wick. Besides, this study has also …

    south-carolina Repository record for Optimizing Heat Pipes With Partially-Hybrid Mesh-Groove Wicking Structures and Its Capillary-Flowing Analysis by Simulation (opens in a new tab)

  5. Polymer-mediated metal and metal oxide nanoparticles: synthesis, characterization and controlled assembly

    … of the nanoparticles. By combining the capillary filling technique with a magnetic field, polyethylenimine mediated magnetite nanoparticles form ordered assembly, in which the resolution of the pattern is doubled. The formation process of ordered structures was systematically …

    alabama Repository record for Polymer-mediated metal and metal oxide nanoparticles: synthesis, characterization and controlled assembly (opens in a new tab)

  6. Dynamic Measurements with Scanning Probe Microscopy: Surface Studies Using Nanostructured Test Platforms of Metalloporphyrins, Nanoparticles and Amyloid Fibrils

    … of magnetic or superparamagnetic nanomaterials. Capillary filling of polydimethylsiloxane (PDMS) molds was applied to generate stripes of FeNi3 nanoparticles with microscale dimensions as test platforms. The MSM-AFM imaging mode was used successfully to characterize nanomaterials of FeNi3 …

    lsu-thes Repository record for Dynamic Measurements with Scanning Probe Microscopy: Surface Studies Using Nanostructured Test Platforms of Metalloporphyrins, Nanoparticles and Amyloid Fibrils (opens in a new tab)

  7. Enhanced mass transport in graphene nanofluidic channels

    … nanochannels and a new hybrid nanochannel based capillary flow measurement technique, we successfully measured the hydraulic resistance (water permeability) of single graphene nanochannels. Our results demonstrate that the frictionless surface of graphene induces a boundary slip and enhances …

    bu Repository record for Enhanced mass transport in graphene nanofluidic channels (opens in a new tab)

  8. Entwurf, Design und experimentelle Charakterisierung von Mikro-Freistrahldispensern

    Die Dissertation behandelt grundlegende Aspekte der Mikro-Freistrahldosierung. Insbesondere wird eine Theorie zur Kapillarbefüllung von Mikrokavitäten und eine Theorie zum Zusammenbruch von Freistrahlen entwickelt. Auf Basis der entwickelten Theorie wird ein Freistrahldispenser entwickelt und …

    freiburg-diss Repository record for Entwurf, Design und experimentelle Charakterisierung von Mikro-Freistrahldispensern (opens in a new tab)

  9. Pore-scale dynamics of immiscible two-phase flow on porous and fractured media

    … validated against the theoretical solution for capillary filling, and analytical solutions for relative permeabilities in a cocurrent flow in a 2D channel. Then it is employed to investigate the effects of interfacial tension, wettability, and the viscosity ratio on displacement of one fluid by …

    strathclyde Repository record for Pore-scale dynamics of immiscible two-phase flow on porous and fractured media (opens in a new tab)

  10. TopSpot: highly parallel nanoliter dispensing-operating conditions and design rules

    … are presented, which are relevant for the capillary filling of the printhead, the droplet formation and the droplet impact on surfaces in the micro scale. In order to provide a fundamental understanding of the pneumatic actuation process for the droplet ejection of the TopSpot dispenser, an …

    freiburg-diss Repository record for TopSpot: highly parallel nanoliter dispensing-operating conditions and design rules (opens in a new tab)

  11. Design, development, and evaluation of a scalable micro perforated drug delivery device capable of long-term zero order release

    … the tubes in powder or solution using manual filling or capillary filling methods. A drug loading of 0.05 – 5.40 mg was achieved depending on the tube size and the drug filling method used. The delivery system in different dimensions was characterized by performing in vitro release studies in …

    texas Repository record for Design, development, and evaluation of a scalable micro perforated drug delivery device capable of long-term zero order release (opens in a new tab)

  12. The Infusion Length of Material Filled Inside Hollow Core Fiber

    … on the infusion length of fluid inside the capillary. Previous research work has shown few results but the equation used for plotting the graph of infusion length v/s time has a numerical error. The work we have done has shown the step-by-step procedure to derive the list of forces acting on …

    rit Repository record for The Infusion Length of Material Filled Inside Hollow Core Fiber (opens in a new tab)

  13. Droplet generation - from the nanoliter to the femtoliter range

    … was set up to simulate the ejection process, the capillary filling and the thermal behavior of the printhead. Furthermore, the influence of specific design parameters and the optimization potential are explained in detail. The three-dimensional simulation model of the thermal inkjet printhead …

    freiburg-diss Repository record for Droplet generation - from the nanoliter to the femtoliter range (opens in a new tab)