Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 2634 for “"Carbide"”.
-
Performance of carbide and coated carbide tipped circular sawblades.
… the performance of coated and uncoated carbide tipped circular saw blades has been searched and reviewed. The search has shown that little similar experiments on the carbide tipped circular saw blades have been conducted. Furthermore the evidence shows that no work has been published on …
-
Studies of silicon carbide and silicon carbide nitride thin films
Master of Science (M.S.)
-
Optical characterization of silicon carbide and silicon carbide reinforced composites
Includes bibliographical references (pages 161-167).
-
Carbide and Carbide-Derived Carbon Materials with Hierarchical Pore Architecture
… thesis addressed the development of new porous carbides and carbide-derived carbons; in particular materials based on silicon-, boron-, tungsten-, and titanium carbide. Therefore, different hard- and soft-templating approaches were applied and the materials were additionally functionalized with …
-
Combustion synthesis of porous tricalcium phosphate, titanium carbide, and nonstoichiometric titanium carbide
Includes bibliographical references (pages 108-117).
-
Processing of Boron Carbide
The processing of boron carbide powder including sintering optimization, green body optimization and sintering behavior of nano-sized boron carbide was investigated for the development of complex shaped body armor. Pressureless sintered B4C relative densities as high as 96.7% were obtained by …
-
Dynamic properties of boron carbide
Boron carbide (BC) is potentially useful as a lightweight armor material, but its penetration resistance drops under dynamic impact, the reasons for which are not entirely understood. To examine the mechanisms of failure under dynamic loading, we subjected samples of boron carbide to uniaxial …
-
Carbon stars and silicon carbide
… by carbonaceous compounds. One of these, silicon carbide (SiC) has been extensively investigated in an attempt to discover the conditions present in these dust shells. In this work, we investigate the nature and uses of SiC for astronomical research, and in particular what SiC can tell us about …
-
Nanomechanical Responses of Boron Carbide
… performance. Among brittle materials, boron carbide is of interest due to its low density, high hardness, and chemical inertness. However, the nanomechanical responses of boron carbide are less known compared to other brittle materials. In this work, we performed nanoindentation at various …
-
New Icosahedral Boron Carbide Semiconductors
Novel semiconductor boron carbide films and boron carbide films doped with aromatic compounds have been investigated and characterized. Most of these semiconductors were formed by plasma enhanced chemical vapor deposition. The aromatic compound additives used, in this thesis, were pyridine (Py), …
-
Carbothermal synthesis of aluminium carbide
… follows : -The reduction of alumina to aluminium carbide occurred through gaseous Al2O and Al. The reduction started with reduction of alumina by carbon to Al(g) and Al2O(g); alumina was further reduced to Al2O vapour by gaseous aluminium. Al2O reacted with graphite producing Al vapour and carbide …
-
Flash sintering of tungsten carbide
Binderless tungsten carbide (BTC) ceramics are inherently difficult to process and very brittle. Most consolidation techniques for processing pure WC powder require long sintering times and intense energy consumption. High-T pressureless and pressure-assisted sintering processes often lead to …
-
Characterization of Uranium Carbide Microspheres In An Inert Zirconium Carbide Matrix For Gas Fast Reactors
… of a dispersion/composite fuel involving Uranium Carbide (UC) and Zirconium Carbide (ZrC) have been characterized and studied. Uranium carbide (UC) microspheres produced in the USC-Nuclear Materials Laboratory were subjected to metallographic techniques, and then characterized by analytical …
-
High-Performance Ultraviolet Photodetectors Based on Transition Metal Boride and Carbide Heterostructures on Silicon Carbide Substrates
… photodetectors that combine wide-bandgap silicon carbide substrates with refractory transition-metal boride and carbide thin film absorbers. These materials were chosen because of their strong near-ultraviolet optical absorption, high electrical conductivity, remarkable thermal stability, and …
-
MACHINING WEAR OF CEMENTED CARBIDE INSERTS
… work investigates the machining wear of a mixed-carbide (A30; Sumitomo Electric) and a tungsten-carbide (F-grade; Toshiba Tungaloy) cemented carbide inserts when machining medium-carbon steel under different cutting conditions (cutting speed =50-300 m/min, feed rate =0.1-0.3 mm/rev ). The effects …
-
Mechanical Properties of Boron Carbide (B4C)
Boron carbide (B4C) is one of the most important opaque boride ceramics that has high hardness and Young's modulus that along with low density lead to a significant resistance to ballistic impact and, thus, B4C is broadly used as a protective material. B4C has also high neutron capturing cross …
-
Solid state formation of calcium carbide
… a process for the synthesis of calcium carbide via a solid-state reaction route and the general kinetics of the reaction was characterized. The calcium carbide was synthesized by conventional and microwave heating (6 kW, 2.45GHz) of micron-sized calcium oxide and carbon powders in argon. …
Page 1 of 132