Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 72 for “"Carburization"”.
-
The carburization of steels of "Krupp" analysis
Samples of four lots of steel containing between 1.75 and 3.79% nickel and between .73 end 1.73% chromium were carbonized to obtain information on the factors affecting rates and deaths of carbon nenetration.
-
Computer simulation of carburization corrosion of nickel-base superalloys
… the predictions of model were compared to carburization profiles obtained experimentally in H₂-CH₄ environment tests. Results are presented for the formation of Cr, Mo, Ti, W, and Nb carbides in Ni-based superalloys. The predicted corrosion profiles are in qualitative agreement with …
-
Effects of thermomechanical pretreatment on abnormal grain growth during simulated carburization, The
Carburization followed by quenching, and tempering is frequently utilized in the automotive industry to increase the surface hardness and compressive residual stress of a steel alloy while retaining toughness and ductility in the core. At carburizing temperatures, austenite grains are formed and …
-
Modeling of high fluence Ti ion implantation and vacuum carburization in steel
Concentration-versus-depth profiles have been calculated for Ti and C in Ti-implanted 52100 steel. A computer formalism was developed to account for diffusion and mixing processes, as well as sputtering and lattice dilation. A Gaussian distribution of Ti was assumed to be incorporated at each time …
-
A study of cases in steel made at different temperatures of carburization
Thesis (B.S.)--Michigan Agricultural College, 1919
-
The fabrication of thin-walled steel alloys through the gas carburization of reduced metal oxide extrusions
… alloys through the reduction and subsequent gas carburization of structures made from metal oxide powders were performed. Batch compositions, as well as the heat treatment parameters necessary for the formation of structures were determined through the use of thermogravimetric analysis, …
-
Investigation of carburization extent from the inner diameter (ID) of ethylene furnace tubes using non-destructive examination (NDE) applied on the outer diameter (OD)
… of measuring the depth and location of carburization and metal dusting on the inside of ethylene pyrolysis tubes using nondestructive tools applied to the outer surface. A carburization test was conducted in a specially designed and manufactured HK-40 alloy tube. Ethylene pyrolysis is …
-
Use of automotive shredder residue for the nitro-carburization of steel : from waste to chemically-bonded ceramic surface on steel
Abrasion and corrosion resistant steel has attracted considerable interest for industrial application as a means of minimising the costs associated with product/component failures and/or short replacement cycles. These classes of steels contain alloying elements that increase their resistance to …
-
Studies on Thermodynamic Considrations and Effects of Alloying Elements upon Carburization, Coking, and Metal Dusting for Fe-Ni-Cr Alloys
This doctoral thesis is related to the following articles:
-
Carbon Effects on Corrosion in Molten Fluoride Salt
… They can degrade structural alloys by driving carburization or by forming metal carbides with corrosion products. A thorough understanding of the interactions between environmental carbon and structural alloys is necessary for the successful development and deployment of FHRs. Key knowledge …
-
Carbon capture and utilization for carburization of hydrogen DRI: A techno-economical system analysis of possible synergies for future mine-to-iron plants at LKAB
… and utilizing the CO2 as a carbon source for carburization of hydrogen reduced direct reduced iron (DRI). The CO2 is captured through a post combustion carbon capture process utilizing an amine solvent. The thesis suggests two routes for CO2 utilization where CO2 is converted to CO or methane, …
-
Catalisadores Victor Teixeira: desenvolvimento e avaliação de carbetos bimetálicos e trimetálico de níquel, molibdênio e tungstênio na reação de reforma seca de metano
… were activated by Temperature Programmed Carburization resulting in polycrystalline structures Ni-Mo2C, Ni-WC e Ni-MexC (where Me = Mo+W, x = 1-2). Although bimetallic carbides deactivate in some situations (Ni-Mo2C by oxidation, if CH4/CO2<1; Ni-WC by carbon deposition, if CH4/CO2≥1), the …
-
Fischer-Tropsch synthesis over various promoted semiconductor oxide supported Mo carbide catalysts
… and β-MoC1-x (0≤x<1) phases were formed during carburization run with a mixture of H2/C3H8 on promoted and unpromoted MoC1-x with no detectable MoO3 phase as measured in X-ray diffraction suggesting the complete conversion of MoO3 precursor to final carbide phase. Temperature-programmed …
-
Sustainable Approach to Transform Metallized Plastic Waste and Automotive Plastic Waste into Value-added Resources
… range of 500 -700 oC. Sustainable steel carburization is achieved by using metallized plastic waste as a carbon resource via plastic gasification and steel gas carburization at temperature of 1200 oC. In this approach, the waste plastics are decomposed into small molecular carbon rich …
-
Effect of Carbon Sources and Carbonaceous Atmospheres on the Effective Synthesis of Nanostructured Tungsten Carbide Powders
… WO3 powder) solid carbon provides either solely carburization, or both reduction and carburization, which can be assisted by the presence of CO in the synthesis atmosphere. The results show that homogeneous, fine mixes of the base powders after milling offer large contact area and improve …
-
Influência da natureza do suporte sobre a atividade do carbeto de molibdênio promovido por níquel na reação de reforma seca do metano
… and carburized using temperature-programmed carburization (TPC). The precursors and catalysts were characterized by X-ray diffraction (XRD), temperature-programmed carburization (TPC), N2 physisorption, scanning electron microscopy (SEM), thermogravimetric analysis and Raman spectroscopy. The …
-
Síntese de carbetos de tungsténio e nióbio a baixa temperatura, através de reação gás-sólido em reator de leito fixo
… reactive powders. During the reduction and carburization reactions the precursors decompose. Gases are evolved and the particles become porous. The high surface area ofthe solid increases the contact area between the solid and gaseous reactants. Thus, the reaction rate is increased. The …
-
Chlorine-induced Corrosion of Chromia-forming Alloys Relevant to Incineration Process
… forming dense and good adherent scale. Internal carburization developed beneath Fe-rich scales on low (15 and 20%) Cr alloys in all gases. When a protective chromia scale was formed, carburization was significantly reduced. The addition of Si suppressed carburization of both ferritic and …
Page 1 of 4