Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Castellated Beams"”.
-
Analysis And Design Of Castellated Beams
The castellated beam is one of the steel members which uses less material, but has equal performance as the I-beam of the same size. Most of the castellated beams are fabricated from a standard universal I-beam or H-column, by cutting the web on a half hexagonal line down the centre of the beam, …
-
Stability of Castellated Beams During Erection
The increased depth of castellated beams presents stability problems, specifically during erection. During erection the castellated beam must support the weight of an erector and self-weight until the continuous bracing of the floor deck is in place. The stability of the unbraced member is based on …
-
Lateral-torsional buckling strength of castellated beams.
… of the research carried out on the subject of castellated beams revealed that one subject had remained largely untouched — lateral stability. This was despite the fact that the fabrication process had increased their strength and rigidity about the , plane of loading at the expense of lateral …
-
Vibration and Flexural Strength Characteristics of Composite Castellated Beams
… becoming a serious serviceability problem. The castellated beam is a prime example and was the focus of this study. The vibration and flexural strength performance were verified in this paper. The vibration characteristics of castellated beams were examined using experimental and analytical test …
-
Inelastic Behavior of Steel I-beams with Hexagonal Web Cutouts
… the maximum load-carrying capacity of steel I-beams with hexagonal web cutouts. When the cutouts are arranged as shown in Figure 1-a, the beam presents an appearance exactly as does a castellated beam. A word relative to castellated beams may be appropriate here, however. A castellated beam …
-
Feasibility of open web rafters constructed of single angles
The purpose of the research reported here was to determine if single angles can be used for chord and web members in lightweight steel open web rafters, and if so to determine what effect the single angles have on the design of the rafter's members. A computer model was constructed to determine the …
-
Simulação numérica do comportamento estrutural de vigas alveolares mistas de aço e concreto
As vigas alveolares são obtidas de perfis de aço tipo I ou H, a partir da expansão da alma dos mesmos, o que gera um ganho de inércia, mantendo-se a mesma massa do perfil original. As estruturas mistas de aço e concreto têm sido uma alternativa cada vez mais empregada na construção civil por …
-
Blast resistant design for roof systems
… in roof construction, such as hot-rolled steel beams and reinforced concrete slabs, are well documented and understood. Open web steel joists (OWSJ) are other types of common roof components. Their responses under loading are not clearly defined, and current methods extrapolate techniques used …
-
Procedimentos para definição das características geométricas de vigas alveolares de aço para sistemas de piso e de cobertura
A expansão do segmento da construção metálica no Brasil tem sido acompanhada de uma demanda crescente por recursos que subsidiem todo processo de projeto de estruturas de aço, desde sua concepção até sua materialização. Nesse contexto, observa-se o ressurgimento do interesse pelas vigas alveolares, …
-
Patrová budova
Cílem práce je navrhnout a posoudit patrovou ocelovou konstrukci pro administrativní účely ve Vsetíně. Půdorysné rozměry objektu jsou 48x40m. Budova má 10 nadzemních podlaží a celková výška je 35,5m. Stropy objektu tvoří spřažená ocelobetonová konstrukce. Součástí konstrukce je zastřešené atrium a …
-
Obchodní galerie
Předmětem diplomové práce je návrh a posouzení hlavních nosných prvků ocelové konstrukce obchodní galerie v Hodoníně. Část půdorysu je obdélníková, část půlkruhová. Objekt má obrysové rozměry 70 m x 147,75 m (a přesahy střechy 1,5 m na všech stranách) a výšku 13,43 m v hřebeni střechy a 22,70 m ve …
-
Ocelová konstrukce multifunkční budovy
Cílem práce je návrh ocelové konstrukce multifunkční budovy v katastrálním území MČ Brno-Bohunice. Multifunkční budova je tvořena dvěma shodnými objekty – A a B. Půdorysné rozměry objektů jsou 40,0 x 40,0 m a konstrukční výšky 33,8 m. Oba objekty mají 1. nadzemní podlaží o konstrukční výšce 5,0 m, …