Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Cathode Catalyst Layer"”.
-
Transport Phenomena in Cathode Catalyst Layer of PEM Fuel Cells
… cost. The activation losses, expensive platinum catalyst, and water flooding phenomenon are the key factors currently hindering commercialization of PEM fuel cells. These factors are associated with the cathode catalyst layer (CCL), which is about ten micrometers thick. Given the small scale of …
-
Characterization of structural degradation in a polymer electrolyte membrane fuel cell cathode catalyst layer
… corrosion results showed a clear thinning of the cathode catalyst layer (CCL) and gas diffusion carbon sub-layer, and a reduction in the effective platinum surface area caused by the carbon support oxidation. The degradation of the CCL and carbon sub-layer altered the water management, as …
-
Development of a Micro-scale Cathode Catalyst Layer Model of Polymer Electrolyte Membrane Fuel Cell
In this work, a micro-model of the catalyst layer of polymer electrolyte membrane fuel cell (PEMFC) was developed. The micro-model includes the transport phenomena and the reaction kinetics within a three dimensional micro-structure representing a sample of PEMFC catalyst layer. Proper physical …
-
Modelling and observing how patterning the cathode catalyst layer-electrolyte interface influences the power density of a PEMFC
… Hydrogen Fuel Cells is through patterning the cathode-electrolyte interface of Polymer Exchange Membrane Fuel Cells (PEMFCs) to increase the active surface area of the interface, in an attempt to increase the amount of Oxygen Reduction at the interface. In this PhD thesis, based on previous …
-
Significance of Heat Dissipation in the Cathode Catalyst Layer on the Lifetime and Reliability of Polymer Electrolyte Fuel Cells
… of pinholes that cause local hotspots in the catalyst layer of the Polymer Electrolyte Fuel Cell, a two-phase non-isothermal model has been developed by coupling Darcy’s law with heat transport. The domain under consideration is a section of the membrane electrode assembly with a half-channel …
-
Optimization of the Cathode Catalyst Layer Composition of a PEM Fuel Cell Using a Novel 2-Step Preparation Method
… by the oxygen reduction reaction at the cathode can block pores in the catalyst layer so that reactant gases can't access the active catalyst sites. Thus, to prevent electrode flooding, the optimal catalyst layer structure has to provide channels for gas and liquid water transport, while …
-
Transient Model of Heat,Mass,and Charge transfer as well as Electrochemistry in the Cathode Catalyst Layer of a PEMFC
A transient model of the cathode catalyst layer of a proton exchange membrane fuel cell is presented. The catalyst layer structure can be described as a superposition of the polymer membrane, the backing layer, and some additional platinum particles. The model, which incorporates some of the …
-
Study of Water Transport Phenomena on Cathode of PEMFCs using Monte Carlo Simulation
… model of water transport phenomena in the cathode catalyst layer (CCL) of PEMFCs. The catalyst layer in the numerical simulation was developed using the optimized sphere packing algorithm. The optimization technique named the adaptive random search technique (ARSET) was employed in this …
-
A model of a partially flooded anode-backing layer (ABL) in a direct methanol fuel cell (DMFC)
… in the presence of a platinum containing electro-catalyst. They normally have the following components: (a) the anode gas channel, (b) the anode backing layer (that distributes liquid methanol and water from the anode gas channel to the anode catalyst layer), (c) the anode catalyst layer (that …
-
Simulation, analysis, and mass-transport optimization in PEMFCs
… load change. When there is liquid water at the cathode catalyst layer, the time constant of the water content in the membrane is closely tied to that of liquid water saturation in the cathode catalyst layer, as the vapor is already saturated. The water content in the membrane will not reach …
-
Characterization of Catalyst Coated Membranes using Electron and X-ray Microscopy
… of research is optimizing the structure of the cathode catalyst layer. The main driving force of this thesis was the effective visualization of nanostructure of the ionomer, which is responsible for proton conduction in the cathode catalyst layer. However, challenges regarding sample preparation …
-
Study of selected water management strategies for proton exchange membrane fuel cells
… the use of perforated sheets as water barrier layers improved the operational life of the fuel cell significantly (>3x) compared to a fuel cell with no additional layers. These sheets increase the water content in the cathode catalyst layer and membrane, via back-diffusion to the anode. In …
-
Engineering the Ionic Polymer/Gas Interfacial Properties of a Fuel Cell Catalyst Layer and Performance Optimization of Various Reversible Fuel Cells
… by high liquid water saturation levels in the cathode catalyst layer. Due to the wettability of the ionomer phase, water produced in the cathode catalyst layer wets the ionomer-gas interface and negatively impacts mass transport of oxygen to the catalyst reaction sites. Therefore, proper water …
-
Modified catalyst layer interfaces for higher utilization and improved operational flexibility of low loading polymer electrolyte fuel cell catalyst layers
… structure, particularly the interfaces of the cathode catalyst layer. Two interfaces were studied and modified, namely the membrane | cathode catalyst layer (CCL) and the CCL | microporous layer (MPL) interfaces. Firstly, the interface of the membrane and CCL was modified by addition of a thin, …
-
Multistep Kinetic Models for Oxygen Reduction Reaction and Platinum Dissolution in Polymer Electrolyte Membrane Fuel Cell
… Finally, an impedance model for the cathode catalyst layer was developed assuming the agglomerate structure. Analytical solution to oxygen transport within the catalyst agglomerate were derived.
-
Combining In Situ Measurements and Advanced Catalyst Layer Modeling in PEM Fuel Cells
Catalyst layer modeling can be a useful tool for fuel cell design. By comparing numerical results to experimental results, numerical models can provide a better understanding of the physical processes occurring within the fuel cell catalyst layer. This can lead to design optimization and cost …
-
Development of a Stochastically-driven, Forward Predictive Performance Model for PEMFCs
… The model explicitly includes each of the 5 layers within a membrane electrode assembly and solves for the transport of charge, heat, mass, species, dissolved water, and liquid water. Key features of the model include the use of a multi-step implementation of the HOR reaction on the anode, …
-
Probing the influence of relative humidity and temperature on the sulfonated silica ceramic carbon electrode for PEM fuel cell operation
… 80 ℃ to 95 °C. This indicates that the SS-CCE cathode catalyst layer promotes back diffusion of water generated at the cathode to the anode resulting in an increased performance with temperature and low relative humidity. Moreover, the SS-CCE catalyst showed better stability after an …
-
Nitrogen-Doped Carbon Nanotubes and their Composites as Oxygen Reduction Reaction Electrocatalysts for Low Temperature Fuel Cells
… oxygen reduction reaction (ORR) occuring at the cathode of low temperature fuel cells provides cost limitations to the sustainable commercialization of this technology. The development of electrocatalyst materials with either reduced or eliminated platinum dependency is an urgent necessity. The …
Page 1 of 3