Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1011 for “"Cathodes"”.
-
Optically enhanced nano-forest cathodes
… REQUEST.] Optically enhanced nano-forest cathodes are electron sources developed for high power devices. The principle of cathode operation is based on coherent light coupling photon energy into resonantly tuned, nanometer sized antennae, which can theoretically generate large current …
-
Manganese oxide cathodes for rechargeable batteries
Manganese oxides are considered as promising cathodes for rechargeable batteries due to their low cost and low toxicity as well as the abundant natural resources. In this dissertation, manganese oxides have been investigated as cathodes for both rechargeable lithium and alkaline batteries. …
-
Evaluation of explosive emission carbon fiber cathodes
… being developed at Texas Tech, utilize cold cathodes that generate electrons via explosive emission. Highly emissive cathodes such as those presented here can generate current densities and currents greater than 200~A/cm^2 and 10 kA, respectively, which are required for devices that can …
-
Air plasma spraying of SOFC composite cathodes
… (APS) has been used to produce porous composite cathodes containing (La0.8Sr0.2)0.98Mn(LSM) and yttria stabilized zirconia (YSZ) for use in solid oxide fuel cells (SOFCs). Preliminary investigations focused on determining the range of plasma conditions under which each of the individual materials …
-
Electrocatalytic Cathodes for Advanced Lithium–Sulfur Batteries
… density of Li–S chemistry. However, sulfur cathodes have shown poor long–term cycling stability resulting from 1) a low conductivity for sulfur and sulfur discharge products, 2) a substantial volume change during the charge–discharge process, and 3) a shuttling effect of lithium polysulfides …
-
Transition metal fluorides as lithium ion cathodes
… associated with transition metal fluoride cathodes. The use of this electrolyte with the iron(II) fluoride (FeF2) nanorod system results in near theoretical capacity (570 mA h g−1) on discharge and charge, with extraordinarily stable cycling (>90% ca- pacity retention after 100 cycles). …
-
Investigation and Improvement of SofC Composite Cathodes
… and long term stability of SOFC composite cathodes prepared by infiltration methods. The majority of the work that follows aims to improve the understanding of the processes contributing to cathode deactivation and to propose strategies to lessen the extent of this deactivation. Through …
-
Conversion mechanism of transition metal fluoride cathodes
… densities of the current intercalation-type cathodes are constrained by the intrinsically limited interstitial sites within their host structures, making them unsuitable for high-energy applications, such as all-electric aircraft.</p> <p>Alternatively, transition metal fluorides (TMFs) are …
-
DURABILITY AND OPTIMIZATION OF SOFC COMPOSITE CATHODES
… low temperature solid oxide fuel cell (LT-SOFC) cathodes. Though the initial performance of this composite is encouraging, the long-term stability of LSM-ESB has yet to be investigated. Here electrochemical impedance spectroscopy (EIS) was used to in situ monitor the durability of LSM-ESB at …
-
Carbon Nanotube Enhanced Lithium Ion Composite Cathodes
… the power capability and cycle life of battery cathodes by reducing the electrode resistance to the reaction site and increasing the diffusion coefficient for ions and electrons. Electrode resistance is typically reduced by a combination of surface coatings and carbon additives in the …
-
NMR of Cathodes for Lithium Ion Batteries
Polyanionic and layered oxide cathodes for lithium ion batteries (LIBs) have been studied using a combination of nuclear magnetic resonance (NMR) spectroscopy and galvanostatic cycling. The pyrophosphate series of 6Li-enriched and 7Li Li2Mn1-yFeyP2O7 were synthesized, and characterized by magic …
-
Microstructural Engineering of Porous Cathodes for SOFC Applications
LSCF [(La0.6Sr0.4)0.98 (Co0.2 Fe0.8) O3-delta], a solid oxide fuel cell (SOFC) cathode material was fabricated and foamed through a polymeric in situ foaming process to build an optimum porous architecture. The changes in the porous cathode microstructure with changes in the in situ foaming …
-
Microwave Synthesis Methods for Lithium-Ion Battery Cathodes
… to power storage, to vehicle propulsion, varying cathodes are required to provide these differing functionalities. This thesis contains a comprehensive literature review, outlining the history of secondary batteries, their uses, current technologies and ongoing research topics within the field of …
-
Chalcogen-carbon nanocomposite cathodes for rechargeable lithium batteries
… performance of S-infiltrated carbon cathodes in electrolytes having different salt concentrations are investigated. Additionally, the carbide derived carbon (CDC) synthesis temperature, electrolyte composition, and electrochemical S utilization have been correlated. The effects of …
-
Field Emission Devices with Carbon Nanotube and Nanofiber Cathodes
… emission material. Carbon nanotube based gated cathodes were fabricated. These devices were tested under vacuum and were found to emit at low turn-on voltages. I-V data was obtained and was found to be in agreement with Fowler-Nordheim theory. Open top triodes were also fabricated and tested. …
Page 1 of 51