Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 57 for “"CdS/CdTe"”.

  1. Research and development of CdS/CdTe solar cells incorporating ZnTe layers.

    … table. The semiconductors are cadmium sulfide (CdS), cadmium telluride (CdTe) and zinc telluride (ZnTe).All of these layers were obtained by growing them using electrodeposition in aqueous solutions. In this project, electrodeposition using 2-electrode system was employed to deposit all of the …

    sheffield-hallam Download PDF for Research and development of CdS/CdTe solar cells incorporating ZnTe layers. (opens in a new tab)

  2. CdS/CdTe Thin Film Solar Cells With Zinc Stannate Buffer Layer

    CdS/CdTe solar cell performance and reproducibility can be improved by integrating a ZTO buffer layer, which interdiffuses into the CdS layer during device fabrication. Reducing the thickness of CdS layer improves the QE in the blue spectral region without affecting the device performance. This …

    usf Repository record for CdS/CdTe Thin Film Solar Cells With Zinc Stannate Buffer Layer (opens in a new tab)

  3. Numerical modeling of CdS/CdTe Thin Film Solar Cell using MEDICI

    Thin Film CdS/CdTe Solar cells have been an attrative alternative to silicon solar cells because of their low cost. Numerical Modeliong using using various tools pertinent only to solar cells have been employed to study the device properties. In this work a powerful device simulation tool MEDICI is …

    usf Repository record for Numerical modeling of CdS/CdTe Thin Film Solar Cell using MEDICI (opens in a new tab)

  4. Mechanical studies of cadmium sulfide/cadmium telluride (CdS/CdTe) photovoltaic modules

    Commercial Cadmium Sulfide (CdS) and Cadmium Telluride (CdTe) photovoltaic modules are typically 24” x 48”. The processing steps include: glass heating, Cadmium Sulfide (CdS) deposition and Cadmium Telluride (CdTe) deposition, Cadmium Chloride (CdCl2) heat treatment, back contact formation and back …

    colostate Repository record for Mechanical studies of cadmium sulfide/cadmium telluride (CdS/CdTe) photovoltaic modules (opens in a new tab)

  5. Molybdenum As a Back Contact for CuCl Treated CdS/CdTe Solar Cells

    CdTe is one of the most promising absorbers for use in inexpensive semiconductor solar cells having achieved a high efficiency of 16.4% in small area cells [1]. One of the most important technological problems in obtaining high efficiencies is to have a good ohmic contact on the CdTe, which is …

    usf Repository record for Molybdenum As a Back Contact for CuCl Treated CdS/CdTe Solar Cells (opens in a new tab)

  6. High Resistivity Zinc Stannate As A Buffer Layer In CdS/CdTe Solar Cells

    … is the most popular choice of front contacts for CdTe solar cells. In this thesis, Cd2SnO4 and Zn2SnO4 thin films are investigated focusing on their electrical and optical properties and used them in solar cells. Processing for these materials is optimized for optimum solar cell performance. …

    usf Repository record for High Resistivity Zinc Stannate As A Buffer Layer In CdS/CdTe Solar Cells (opens in a new tab)

  7. Processing of CdS/CdTe solar cell and the growth model of CdTe thin film

    … silicon PV in the cost. The most common CdTe solar cells consist of a simple p-n heterojunction structure containing a p-doped CdTe layer and n-doped cadmium sulfide (CdS) layer, which acts as a window layer. Cadmium Sulfide (CdS) thin films are often deposited on glass substrates coated …

    njit Repository record for Processing of CdS/CdTe solar cell and the growth model of CdTe thin film (opens in a new tab)

  8. Optical measurement techniques for in-line process control in CdS/CdTe solar cell manufacturing

    CdS/CdTe solar cells have achieved gigawatt-scale commercial production at a lower cost than traditional crystalline silicon photovoltaics. With large-scale production of semiconductor devices, process control is critical to ensuring consistent quality. While there are many classes of materials …

    colostate Repository record for Optical measurement techniques for in-line process control in CdS/CdTe solar cell manufacturing (opens in a new tab)

  9. Computational modeling of cadmium sulfide deposition in the CdS/CdTe solar cell manufacturing process

    A thin film CdS/CdTe solar cell manufacturing line has been developed in the Photovoltaic Materials Engineering Lab at Colorado State University. This system incorporates multiple stations using NiCr embedded heaters in graphite crucibles to successively sublimate layers of different photovoltaic …

    colostate Repository record for Computational modeling of cadmium sulfide deposition in the CdS/CdTe solar cell manufacturing process (opens in a new tab)

  10. Impact of back-contact materials on performance and stability of CdS/CdTe solar cells

    Thin-film CdTe based solar cells are one of the leading contenders for providing low-cost and pollution-free energy. The formation of a stable, low resistance, non-rectifying contact to p-CdTe thin-film is one of the major and critical challenges associated with this technology in the fabrication …

    colostate Repository record for Impact of back-contact materials on performance and stability of CdS/CdTe solar cells (opens in a new tab)

  11. Development Of Transparent And Conducting Back Contacts On Cds/cdte Solar Cells For Photoelectrochemical Application

    … for hydrogen production by water splitting. CdS/CdTe solar cell, a promising candidate for low-cost, thin-film PV cell is used as one of the thin film solar cells in a PEC cell. This research work focuses on developing various back contacts with good transparency in the infrared region (~750 …

    ucf Repository record for Development Of Transparent And Conducting Back Contacts On Cds/cdte Solar Cells For Photoelectrochemical Application (opens in a new tab)

  12. Variation of ZnTe:Cu sputtering target preparation and impacts on film properties and CdS/CdTe solar cell performance

    … solar cell consists of cadmium telluride (CdTe) as the p-type material, and cadmium sulfide (CdS) as the n-type. High-performance CdS/CdTe thin-film photovoltaic (PV) devices can be produced by incorporating a copper-dopped zinc telluride (ZnTe:Cu) interface layer between the CdTe absorber …

    colo-mines Repository record for Variation of ZnTe:Cu sputtering target preparation and impacts on film properties and CdS/CdTe solar cell performance (opens in a new tab)

  13. Development of Cd1-xMgxTe thin films for application as an electron reflector in CdS/CdTe solar cells

    Efficiencies of CdS/CdTe photovoltaic cells significantly lag behind their theoretical limit, primarily because open-circuit voltage (VOC) of record efficiency cells (872 mV) is well below what is expected for the CdTe band gap (1.5 eV). A substantial VOC improvement can be achieved through …

    colostate Repository record for Development of Cd1-xMgxTe thin films for application as an electron reflector in CdS/CdTe solar cells (opens in a new tab)

  14. Development of plasma cleaning and plasma enhanced close space sublimation hardware for improving CdS/CdTe solar cells

    … manufacturing of single-junction thin-film CdTe solar cells with efficiencies over 13%. New techniques that further increase cell efficiency and reduce production expenses are required to make solar energy more affordable. To address this need a hollow-cathode plasma source was added to the …

    colostate Repository record for Development of plasma cleaning and plasma enhanced close space sublimation hardware for improving CdS/CdTe solar cells (opens in a new tab)

  15. Effect of SnO<sub>2</sub> Roughness and CdS Thickness on the Performance of CdS/CdTe Solar Cells

    … of surface roughness on the performance of CdS/CdTe solar cells. Film roughness was controlled by varying the substrate temperature. Characterization of the SnO2 films has also carried out using AFM measurements. It was found that increase in substrate temperature results in increased …

    usf Repository record for Effect of SnO<sub>2</sub> Roughness and CdS Thickness on the Performance of CdS/CdTe Solar Cells (opens in a new tab)

  16. Effect of In Situ Thermal Annealing Process on Structural, Optical and Electrical Properties of CdS\CdTe Thin-Film Solar Cells Fabricated by Pulsed Laser Deposition

    … cells. The two attractive properties of the CdTe are its nearly ideal band gap of ~1.5 eV for single p-n junction photovoltaic and its high optical absorption coefficient up to 〖10〗^5 cm-1. Therefore, a thickness of ~1 µm of CdTe can absorb up to 90% of the incident light. The key to …

    ku Repository record for Effect of In Situ Thermal Annealing Process on Structural, Optical and Electrical Properties of CdS\CdTe Thin-Film Solar Cells Fabricated by Pulsed Laser Deposition (opens in a new tab)

Page 1 of 3