Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 87 for “"Cementite"”.

  1. A study of the formation of cementite in steel

    Thesis (M.S.)--Michigan State College of Agriculture and Applied Science, 1933

    msu Repository record for A study of the formation of cementite in steel (opens in a new tab)

  2. Isothermal thickening of cementite allotriomorphs in AISI 52100 steel, The

    Includes bibliographical references (pages 194-197).

    colo-mines Repository record for Isothermal thickening of cementite allotriomorphs in AISI 52100 steel, The (opens in a new tab)

  3. The formation of cementite from hematite and titanomagnetite iron ore and its stability

    … project examined the reduction and formation of cementite from hematite and titanomagnetite ores and cementite stability. The aim of the project was to develop further understanding of cementite stability under conditions relevant to direct ironmaking and the mechanism of cementite decomposition. …

    unsw Repository record for The formation of cementite from hematite and titanomagnetite iron ore and its stability (opens in a new tab)

  4. Ductile-brittle transition behaviour and its underlying mechanisms in steel: effects of cementite morphology

    … This research aims to elucidate the effect of cementite morphology, spheroidised and pearlitic lamellar, on the ductile-brittle transition behaviour of structural steel, and to deepen our basic knowledge on an experimental basis. The key questions to have been tackled and answered in this …

    oxford Repository record for Ductile-brittle transition behaviour and its underlying mechanisms in steel: effects of cementite morphology (opens in a new tab)

  5. A Physics-Based Model for Grain Boundary Segregation, Cementite Coarsening, and Intergranular Fracture in Tempered Martensitic Steel

    Steel is one of the most widely used materials in our society, supporting everything from cars and buildings to energy infrastructure. As industries demand lighter and stronger components, it becomes increasingly important to understand why steel sometimes becomes brittle and breaks, especially …

    mcmaster Repository record for A Physics-Based Model for Grain Boundary Segregation, Cementite Coarsening, and Intergranular Fracture in Tempered Martensitic Steel (opens in a new tab)

  6. ON THE CRYSTALLOGRAPHY OF BAINITIC TRANSFORMATION IN STEELS

    … in this study the structures of ferrite/cementite and ferrite/austenite interfaces in bainite were investigated from a crystallographic viewpoint. After describing these interfaces, the idea of interphase boundary nucleation of cementite on a ferrite/austenite interface was …

    mcmaster Repository record for ON THE CRYSTALLOGRAPHY OF BAINITIC TRANSFORMATION IN STEELS (opens in a new tab)

  7. Effects of metastable carbide destabilization on metal dusting of ferritic iron

    … suggests that formation of metastable cementite and its subsequent decomposition is the central aspect of the process. To verify this hypothesis, an Fe-Si model was designed based on silicon's ability to retard cementite formation. However, this strategy was unsuccessful because silicon …

    unsw Repository record for Effects of metastable carbide destabilization on metal dusting of ferritic iron (opens in a new tab)

  8. ΕΠΙΔΡΑΣΗ ΤΗΣ ΠΑΡΟΥΣΙΑΣ ΤΟΥ ΧΑΛΚΟΥ ΣΤΟΝ ΠΕΡΛΙΤΙΚΟ ΚΑΙ ΜΠΑΙΝΙΤΙΚΟ ΜΕΤΑΣΧΗΜΑΤΙΣΜΟ ΤΩΝ ΧΑΛΥΒΩΝ

    … THE PROEUTECTOID PHASES EITHER THE PROEUTECTOID CEMENTITE OR THE PROEUTECTOID FERRITE. WITHING PEARLITESTHE PRESENCE OF SMALL E-CU PRECIPITATES WAS FOUND WITHIN BOTH PEARLITIC FERRITE AND WITHIN PEARLITIC CEMENTITE E-CU PRECIPITATES WITHIN PEARLITIC CEMENTITE ARE OF THE INTERPHASE TYPE AND ARE …

    greece Repository record for ΕΠΙΔΡΑΣΗ ΤΗΣ ΠΑΡΟΥΣΙΑΣ ΤΟΥ ΧΑΛΚΟΥ ΣΤΟΝ ΠΕΡΛΙΤΙΚΟ ΚΑΙ ΜΠΑΙΝΙΤΙΚΟ ΜΕΤΑΣΧΗΜΑΤΙΣΜΟ ΤΩΝ ΧΑΛΥΒΩΝ (opens in a new tab)

  9. Characterisation and modelling of precipitation during the early stages of tempering for low carbon low alloy Q&T steels

    … during water quenching with ε’-carbide and cementite present within the martensite laths in the three steels. Coarsening of inter-lath cementite took place independently from that of intra-lath cementite in the three steels during tempering from 2 hrs to 16 hrs. Finer elliptical secondary …

    birmingham Download PDF for Characterisation and modelling of precipitation during the early stages of tempering for low carbon low alloy Q&T steels (opens in a new tab)

  10. Etude de la sphéroïdisation de la perlite et de la recristallisation de la ferrite sous champ magnétique

    … is to study the effect of magnetic fields on cementite spheroidization and ferrite recrystallization. So far, these two transformations involve long thermal treatments at high temperatures. Thus, a reduction of the processing time or an improvement of the mechanical properties of the steels by …

    liege Repository record for Etude de la sphéroïdisation de la perlite et de la recristallisation de la ferrite sous champ magnétique (opens in a new tab) Download PDF for Etude de la sphéroïdisation de la perlite et de la recristallisation de la ferrite sous champ magnétique (opens in a new tab)

  11. The Influence of Steel Composition on the Strain Ageing Response of High Strength Pearlitic Wire.

    … and thermodynamic modelling of the cementite stability. The experimental steels were produced in a vacuum induction melt furnace to ensure precise control over composition, forged and hot rolled to rod. The rod samples were then heat treated to the appropriate starting microstructure …

    whiterose Download PDF for The Influence of Steel Composition on the Strain Ageing Response of High Strength Pearlitic Wire. (opens in a new tab)

  12. The influence of copper on the graphitization behavior of white cast iron

    … to effect the decomposition of the massive-cementite (primary graphitization) and of the pearlite-cementite (secondary graphitization) have been determined for white cast iron containing varying amounts of copper, carbon and silicon. This research indicates that copper shortens the time …

    iastate Repository record for The influence of copper on the graphitization behavior of white cast iron (opens in a new tab)

  13. Intergranular and transgranular stress corrosion cracking of carbon steel in fuel-grade ethanol

    … polarization measurements with pure iron and cementite. Clear differences were found between the intergranular and transgranular SCC mechanisms. With negligible chloride concentrations the transgranular SCC initiates only at the pearlite nodules while the intergranular SCC initiates only at …

    aalto Repository record for Intergranular and transgranular stress corrosion cracking of carbon steel in fuel-grade ethanol (opens in a new tab)

  14. The production and crystallization of amorphous Fe-C alloys

    … involving the formation of ferrite followed by cementite was observed at low temperatures. The structure and chemistry of these crystallization products were characterized by x-ray diffraction, electron microscopy and atom probe tomography. In-situ annealing was also per- formed in transmission …

    ubc Repository record for The production and crystallization of amorphous Fe-C alloys (opens in a new tab) Download PDF for The production and crystallization of amorphous Fe-C alloys (opens in a new tab)

  15. Multiscale study of the pearlitic microstructure in carbon steels: atomistic investigation and continuum modeling of iron and iron-carbide interfaces

    … orientation relationships between ferrite and cementite within pearlite: the Bagaryatskii, the Isaichev, and the Pitsch-Petch, as well as their associated near orientations. Dislocation arrays are found to form for all orientation relationships, with their spacing and direction a function of …

    colostate Repository record for Multiscale study of the pearlitic microstructure in carbon steels: atomistic investigation and continuum modeling of iron and iron-carbide interfaces (opens in a new tab)

  16. Processing-structure-mechanical property relationships in high carbon medium manganese steels with austenitic microstructure

    … stability. The precipitation and dissolution of cementite in austenitic medium Mn high C steels capable of deformation-induced twinning were analyzed based on the associated length changes. Al addition was found to significantly retard the kinetics of cementite precipitation, indicating its …

    qucosa-diss

  17. Identify and quantify the thermodynamics and kinetics aspects of fast tempering in martensite low-alloy medium carbon steel used for aerospace application

    … over tempering behavior, the kinetics of cementite coarsening in tempered martensite AISI 4340 steel system with initial hardness 460 HV has been investigated. Microstructural investigation and modeling have been undertaken to understand the material response during tempering at 550 °C, …

    ets-quebec Download PDF for Identify and quantify the thermodynamics and kinetics aspects of fast tempering in martensite low-alloy medium carbon steel used for aerospace application (opens in a new tab)

  18. Metal dusting on heat-resistant alloys under thermal cyclic conditions

    … alloys were exposed to test the hypothesis that cementite formation and its decomposition is necessary for metal dusting to occur. A series of ferritic and austenitic engineering alloys were also exposed to compare their dusting rates. Two specimens of each alloy were studied, one was etched in a …

    unsw Repository record for Metal dusting on heat-resistant alloys under thermal cyclic conditions (opens in a new tab)

Page 1 of 5