Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"Center Crack"”.

  1. A Progressive Damage Methodology for Residual Strength Predictions of Center-Crack Tension Composite Panels

    … examinations led to the postulate that this crack growth resistance could be due to fiber bridging, defined here as fractured fibers of one ply bridged by intact fibers of an adjacent ply. The progressive damage methodology is currently capable of predicting the initiation and growth of …

    odu Repository record for A Progressive Damage Methodology for Residual Strength Predictions of Center-Crack Tension Composite Panels (opens in a new tab)

  2. Peridynamics for Failure and Residual Strength Prediction of Fiber-Reinforced Composites

    … difficulty in handling discontinuities, such as cracks or interfaces, within a body. Damage is included within the constitutive model; initiation and propagation can occur without resorting to special crack growth criteria necessary in other commonly utilized approaches. Predicting damage and …

    arizona-thes Repository record for Peridynamics for Failure and Residual Strength Prediction of Fiber-Reinforced Composites (opens in a new tab)

  3. Theoretical limits in detachment of fibrillar dry adhesives under geometrical confinement

    … stiffness grants resistance against interfacial crack growth and detachment under external loading. Nature provides us with a solution to this contentious requirement in the form of bi-material composite adhesives consisting of a soft tip confined by a much stiffer backing, significantly …

    ubc Repository record for Theoretical limits in detachment of fibrillar dry adhesives under geometrical confinement (opens in a new tab) Download PDF for Theoretical limits in detachment of fibrillar dry adhesives under geometrical confinement (opens in a new tab)

  4. Finite element methods for optimizing the fracture toughness of fibrillar adhesives and the deep indentation of hyperelastic materials

    … of fibrillar adhesives towards initiated cracks. Project 1 applies to applications where the crack initiation is unavoidable and the crack initiation location is fixed. Multiple materials are considered. The objective is to minimize a weighted sum of the compliance and the J-integral, …

    ubc Repository record for Finite element methods for optimizing the fracture toughness of fibrillar adhesives and the deep indentation of hyperelastic materials (opens in a new tab) Download PDF for Finite element methods for optimizing the fracture toughness of fibrillar adhesives and the deep indentation of hyperelastic materials (opens in a new tab)

  5. Modelling and simulations of hydrogels with coupled solvent diffusion and large deformation

    … the transient energy release rate for crack growth in hydrogels, based on a modified path-independent J-integral, is presented. The transient energy release rate takes into account the energy dissipation due to diffusion. Numerical simulations are performed for a stationary center crack …

    texas Repository record for Modelling and simulations of hydrogels with coupled solvent diffusion and large deformation (opens in a new tab)

  6. New Methodology for Predicting Ultimate Capacity of One-Sided Composite Patch Repaired Aluminum Plate

    … to traditional weld repair methods to address cracking in aluminum plates. Analytical and numerical design methods use linear elastic fracture mechanics (LEFM) and do not account for elastic-plastic crack tip behavior demonstrated in static tests of one-sided patch repaired ductile panels. This …

    maryland Repository record for New Methodology for Predicting Ultimate Capacity of One-Sided Composite Patch Repaired Aluminum Plate (opens in a new tab)

  7. J-integral Computations for Linear Elastic Fracture Mechanics in h,p,k Mathematical and Computational Framework

    … including those in very close proximity of the crack without use of special crack tip or quarter point elements at the crack tip. A center crack panel under isotropic homogeneous plane strain linear elastic behavior, subjected to uniaxial tension (mode I) is used as model problem for all …

    ku Repository record for J-integral Computations for Linear Elastic Fracture Mechanics in h,p,k Mathematical and Computational Framework (opens in a new tab)

  8. Fracture mechanics of bi-material interface cracks

    … that the elastic stress distribution near a crack tip in an isotropic two dimensional deformation field exhibits an inverse square root singularity. The nature of the stress singularity at the tip of a plane crack terminating at an interface of two materials is, however, dependent on both the …

    utk-theses Repository record for Fracture mechanics of bi-material interface cracks (opens in a new tab)

  9. A new approach to discovering the fundamental mechanisms of hydrogen failure

    … and a commercial purity iron were loaded in center crack in tension mode in contact with liquid metal. Each of these samples displayed fracture modes typical of hydrogen embrittlement. The microstructures beneath these typical features are complex and showed striking commonalities between the …

    uiuc Repository record for A new approach to discovering the fundamental mechanisms of hydrogen failure (opens in a new tab)

  10. Thermal residual stresses in bonded composite repairs on cracked metal structures

    … and strains in bonded composite repairs on cracked metal structures. This work is an essential contribution to a fatigue damage initiation model for bonded composite repair, where knowledge of the initial stress/strain state after an elevated temperature cure is important. Furthermore, this …

    ubc Repository record for Thermal residual stresses in bonded composite repairs on cracked metal structures (opens in a new tab) Download PDF for Thermal residual stresses in bonded composite repairs on cracked metal structures (opens in a new tab)

  11. Fracture Control Modeling with the Finite Element Method

    … finite element method approach in the design of crack arresting devices. Current design and manufacturing practices are improving structures' susceptibility to fracture, in particular brittle fracture; however, cracks in structures are still observed within their lifespans due to severe …

    calpoly Repository record for Fracture Control Modeling with the Finite Element Method (opens in a new tab)

  12. Low Cycle Fatigue and Crack Growth in Oxygen Free High Conductivity Copper

    Made available in DSpace on 2017-07-06T18:48:49Z (GMT). No. of bitstreams: 3 Jelke_Brian_E_MS.pdf: 38403107 bytes, checksum: 6cb6ee777abb55ea1ff6b87f689784be (MD5) Jelke_Brian_E_MS_ABS.pdf: 481228 bytes, checksum: 47c7459288ca83db0d207cd9a08d1c78 (MD5) license.txt: 4813 bytes, checksum: …

    uiuc Repository record for Low Cycle Fatigue and Crack Growth in Oxygen Free High Conductivity Copper (opens in a new tab)