Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 82 for “"Center to Center}"”.
-
Further investigation of the planar array of superheated superconductors
… of the Planar Array of Superheated Superconductors (PASS) were studied. Several 100 x 100 arrays, 250 x 250 arrays and 100 x 1 line arrays of tin squares were fabricated with the photolithography techniques, and then melted in a vacuum chamber. Phase transition curves were mapped out at the …
-
The Fabrication and Applications of Protein Patterns Produced Via Particle Lithography
… particle lithography technique with the ability to pattern protein in hexagonal dot arrays was developed. The patterning method consists of a simple three-step procedure: (1) formation of a close-packed polystyrene microsphere monolayer, (2) grafting of a protein-resistant layer of poly(ethylene …
-
Investigation of the Triplet State Properties of Bis(chlorophyll)cyclophane and Its Partially Metalated Derivatives
… synthesized as a model system for the light to energy conversion in green plant photosynthesis. The molecule is two synthetically linked chlorophyll macrocycles stacked center to center with the Q(,y) transition dipoles of each macrocycle perpendicular. Zero, one, or two magnesium(II) ions …
-
Full-Scale Lateral-Load Tests of a 3x5 Pile Group in Soft Clays and Silts
… in a 3x5 pattern. The piles were placed at a center-to-center spacing of 3.92 pile diameters. A single isolated pile was also tested for comparison to the group response. The subsurface profile consisted of cohesive layers of soft to medium consistency underlain by interbedded layers of sands …
-
Optimization of piled foundations An optimization study to reduce embodied carbon using parametric design tools
Today, approximately 11% of the global carbon dioxide emissions are connected to the construction industry, including manufacturing of materials. Due to a continuing global population growth, these values are expected to increase beyond the already high emission levels. A way to reduce construction …
-
Experiments and analyses for flow through partially solidified alloys
… under which the momentum equation reduces to Darcy's law are elucidated. Permeabilities for flow of interdendritic liquid in Al-Cu alloys with equiaxial structures are measured using a simple, cost-effective permeameter. Center-to-center distance between grains (180 μm to 450 μm), specific …
-
Selective Oxidation of Aluminum-Bearing Iii-V Semiconductors: Properties and Applications to Small-Volume Quantum Well Heterostructure Lasers
"The same IILD + oxidation process is used to fabricate a two-dimensional active photonic lattice that is comprised of $\sim$9-$\mu$m microdisk lasers that are arranged in a triangular (hexagonal close-packed) lattice arrangement. The disks are closely spaced (11-$\mu$m center-to-center spacing) …
-
Liquid Film Formation by Spray Droplet Impact on a Solid Surface
… through the deposition of droplets and spray onto a solid surface was studied experimentally. Experiments were done to observe the coalescence of highly viscous liquid droplets (87 wt% glycerin-in-water solutions) deposited onto a flat, solid steel plate. Droplets were deposited sequentially in …
-
NUMERICAL PREDICTIONS FOR UNSTEADY VISCOUS FLOW PAST AN ARRAY OF CYLINDERS.
… onset flow is analyzed. The fluid is taken to be viscous and incompressible. The array of cylinders consists of two horizontal rows extending to infinity in the upstream and downstream directions. The center-to-center distance between adjacent cylinders is a constant. The Biot-Savart law of …
-
Experimental analysis on the performance of small-scale UAV propellers with micro-structured surfaces
… layer effects. An experimental investigation into the performance of small-scale UAV propellers coated with micro-structured surfaces on the suction side of the blade is conducted. In order to characterize the performance of the propeller, a custom experimental setup featuring a motor-propeller …
-
Acoustic boundary wave generation and shadowing at a seamount.
… one with a surface of scaled Rayleigh roughness to model a 35 knot wind, the relative contributions are determined for off-axis scattering elements, multiple reflection from the ocean surface, and diffraction over the crest of the seamount. Boundary wave generation over a randomly rough plane …
-
Fixation of dormant tilletia teliospores for thin sectioning
… solution or distilled water were frozen onto specimen chucks of an FTS Sorvall- Christensen frozen thin sectioner and cut or fractured at various temperatures (-20 to -75 C) and thickness settings (10, 15, 20, and 25 um). Cytoplasm of dormant spores was well preserved and organelles were …
-
Column-Supported Embankments: Full-Scale Tests and Design Recommendations
When an embankment is to be constructed over ground that is too soft or compressible to adequately support the embankment, columns of strong material can be placed in the soft ground to provide the necessary support by transferring the embankment load to a firm stratum. This technology is known as …
-
ANCHORAGE OF HIGH-STRENGTH REINFORCING BARS IN CONCRETE
… column-foundation joints were conducted to investigate the anchorage strength and behavior of large and high-strength headed bars as functions of the distance between the anchored headed bar and the compression reaction, number of headed bars tested simultaneously (1 or 2), size of the …
-
Phase Behavior, Structure, and Properties of Colloidal Microsphere-Nanoparticle Mixtures
… additions, the system spontaneously assembled into a colloidal gel whose strength increased with microsphere volume fraction. Between a lower and upper critical nanoparticle volume fraction, such binary mixtures formed a stable fluid phase due to nanoparticle haloing. In this concentration …
-
Electron beam interactive oxide films for nanometer scale lithography
… films produced by rf sputtering have been found to show high resolution lithographic characteristics when exposed under high dose rate conditions in a scanning transmission electron microscope. Holes and lines less than 10 nm in dimensions have been formed in amorphous films of Al$\sb2$O$\sb3$, …
-
Lateral Resistance of Grouped Piles Near 20-ft Tall MSE Abutment Wall with Strip Reinforcements
… and transversely spaced at 4.7 pile diameters center-to-center. The purpose of these tests was to determine the extent of group effects on lateral pile resistance, induced loads in soil reinforcements, and MSE wall panel deflections compared to those previously observed in individually …
-
Theoretical study of fullerences and carbon nanotubes
… in energy than single bond (SB) isomers. The center to center distances (CCD) of these two isomers calculated in our study are in fair agreement with experiment. Part II presents a good model (Fe+-oronene) and a scheme to simulate the binding of iron cations to [n, n] nanotubes. The binding …
-
Fog Harps: Elastocapillarity, Droplet Dynamics, and Optimization
Fog harvesting is emerging as a promising means to ease the water shortage crisis in arid regions of the world with ample fog. The current state-of-the-art for fog harvesting is mesh netting, which is accessible yet struggles from a dual constraint: a course mesh lets most microscopic fog droplets …
-
Numerical Study of the Flow Characteristics of Circular Twin Synthetic Jets
… (s/d = 1.2,2.0,3.0, and 4.0 where s is the center-to-center spacing between the nozzles). Time- and phase-averaged statistics, Q- criterion, and vortex circulation were used to characterize the evolution of vortical structures and jet-to-jet interference of the twin synthetic jets. The …
Page 1 of 5