Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 41 for “"Centrifuge Testing"”.
-
Centrifuge testing of an expansive clay
… estimated using correlations instead of direct testing as direct testing is expensive and often takes over a month to complete. The purpose of this study was to determine if centrifuge technology could be used to characterize expansive clays through direct testing. Testing was performed in an …
-
Development of anisotropic clay soil beds for geotechnical centrifuge testing
… construction events using a geotechnical centrifuge. Geotechnical centrifuge testing has been used to investigate complex geotechnical events; however, natural soil is fundamentally different to a ‘typical’ homogenous clay soil bed. Natural soil contains structure (Mitchel, 1976) which, in …
-
Development and evaluation of an instrumentation system for high acceleration centrifuge testing of an artificial rock material
… an instrumentation system for high acceleration centrifuge testing of an artificial rock material. A stress analysis of the centrifuge rotor was performed to ensure its safe operation. The centrifuge was found to be safe for operation to a maximum of 1000 rpm for a payload of 15 pounds (6.82 kg). …
-
Evaluation of the effects of defects and ageing on the strength of composite bonded joints by mechanical tests and numerical simulation: implementation of the novel centrifuge test
… must be prevented by design features or 2. proof testing must be conducted on each production article that will apply the critical limit design load to each critical bonded joint or 3. repeatable and reliable nondestructive inspection techniques must be established that ensure the strength of each …
-
Numerical and Physical Modeling of Cone Penetration in Unsaturated Soils and Numerical Simulation of Fracture Propagation in Shale Rock during Brazilian Test
… finite element modeling and experimental centrifuge testing. The results showed suction in unsaturated soil significantly influenced the soil resistance to cone penetration. Two approaches were implemented to numerically consider the partially saturated soil condition; i.e. modifying …
-
Determination of potential vertical rise in expansive soils using centrifuge technology
… an expansive soil’s swelling potential using centrifuge technology (DMS-C) and determines a potential vertical rise (PVR) for use in site characterization. This study consists of eleven soils sampled from ten sites in Bexar, Atascosa, and Guadalupe Counties of the San Antonio TxDOT district to …
-
Use of thermo-active piling for slope stabilisation
… purposes - were investigated. An extensive centrifuge testing programme was conducted to quantify the overall performance of unsaturated slopes reinforced by thermo-active piles under different thermal loading conditions. Load transferred to the piles, bending moment distribution along the …
-
Physical Modelling of Flowslide Mobility
… through the physical modeling technique of centrifuge testing. A flowslide simulator was developed to investigate the factors that lead to the liquefaction of soil slopes. This simulator was capable of replicating groundwater regimes and intense rainfalls with pore pressure transducers to …
-
Hydro-mechanical characterization of unsaturated clays using centrifuge technology
… and analytical methods, with emphasis in centrifuge testing, were implemented in this research to characterize the hydro-mechanical behavior of unsaturated clays. In particular, experimental procedures and back-analysis methods were developed to determine the Soil Water Retention Surface …
-
Bearing capacity of perforated offshore foundations under combined loading
… most relevant. Experimental work has included centrifuge testing of ring and square annular foundations on clay, and 1g testing of grillage foundations on sand. Finite element modelling has also been undertaken to assess perforated foundation capacity. A Tresca material subroutine (UMAT) and an …
-
Evolutionary Intensity Measures for More Accurate and Informative Evaluation of Liquefaction Triggering
… This study used both cyclic simple shear and centrifuge testing to systematically investigate the response of liquefiable soils to fully transient earthquake loading histories. The results of these tests were used to evaluate the efficiency of evolutionary intensity measures that are typically …
-
Effect of fabric on the swelling of highly plastic clays
… at the same time, validating a new set-up for a centrifuge testing program developed over the course of the project to allow for testing of undisturbed specimens. Testing to examine fabric was performed using two methods at the same effective stress, the conventional swelling test, ASTM D4546, …
-
Pore pressure response of liquefiable soil treated with prefabricated vertical drains : experimental observations and numerical predictions
… mitigation has been evaluated via small – scale centrifuge testing performed on untreated soil deposits and on soil deposits treated with vertical drains. In particular, the performance of the soil deposits subjected to sinusoidal motions and actual earthquake recordings was tested. The main goal …
-
The influence of structural details, geotechnical factors and environs on the seismic response of framed structures.
… of frame rigidity, geometry and SSI.<br/>Dynamic centrifuge testing is also carried out in order to further validate the improved spectral model for the case of real soil with shear dependant stiffness. The physical model testing is also extended to consider how environs, such as other structures …
-
Characterization of Soft Clays and the Response of Soil Foundation Systems for Offshore Applications
… m. The research project describes a laboratory testing program of CKoU triaxial tests along with bender element measurements carried out at Texas A&M University for correlation of soil strength with stiffness. A new framework for correlating stiffness and strength is proposed, based on void …
-
Shaking Table Testing to Evaluate Effectiveness of Prefabricated Vertical Drains for Liquefaction Mitigation
… vertical drains have been performed with centrifuge tests, no full-scale drain installation had been tested previously. Two drain geometries were investigated, first with drains spaced at 4 feet and second with drains spaced at 3 feet, to determine the effect of spacing on drain …
-
Characterization of the swelling behavior of expansive clays using centrifuge technology
Experimental techniques with emphasis in centrifuge testing were implemented to characterize the swelling behavior of expansive clays. This research consisted in three self-contained sections related to the study of different aspects of expansive clays. The first research component focused on the …
-
Investigation of Softening Instability Phenomena Under Simulated Infinite Slope Conditions in Centrifuge Tilting Table Tests
… realities of sample preparation for triaxial testing make performing tests below 20 to 30 kPa of confining stress exceptionally difficult. In this thesis, the development of a centrifuge tilt-table test device is described which aims to test the behaviour of loose granular slopes under stress …
-
Numerical modelling of laterally loaded piles in clay
… methods including finite element analysis (FEA), centrifuge testing, and large scale field testing. In this thesis, a novel numerical technique termed finite element limit analysis (FELA) is used to investigate the limiting capacity of laterally loaded piles in clay and the mechanisms that …
-
Experimental Studies of Squat Gravity Caissons and Monopiles for Offshore Applications
… presents initial results from geotechnical centrifuge experiments on squat gravity caissons and monopiles under cyclic eccentric loading in soft clay under undrained conditions. These experiments were conducted in the 1-g laboratory at Texas A&M University and the 150g-ton centrifuge at …
Page 1 of 3