Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 152 for “"Ceramic composite"”.

  1. Combustion synthesis of porous ceramic composite materials

    Includes bibliographical references (pages 165-167).

    colo-mines Repository record for Combustion synthesis of porous ceramic composite materials (opens in a new tab)

  2. Laser-induced reaction alumina coating on ceramic composite

    <p>Silicon carbide ceramics are susceptible to corrosion by certain industrial furnace environments. It is also true for a new class of silicon carbide-particulate reinforced alumina-matrix composite (SiC<sub>(P)</sub>/Al<sub>2</sub>O<sub>3</sub>) since it contains more than 55% of SiC particulate …

    utk-theses Repository record for Laser-induced reaction alumina coating on ceramic composite (opens in a new tab)

  3. Combustion synthesis of a foamed ceramic composite material

    Includes bibliographical references (pages 98-100).

    colo-mines Repository record for Combustion synthesis of a foamed ceramic composite material (opens in a new tab)

  4. Properties and performance of a ceramic composite component

    … the properties and performance of a tubular, ceramic composite component. Eight test specimens were fabricated using an injection molding process with a borosilicate glass matrix reinforced with chopped graphite fibers. These specimens were then tested under quasi-static and cyclic loading at …

    vt Repository record for Properties and performance of a ceramic composite component (opens in a new tab)

  5. Injection solid freeforming of polymer and ceramic composite materials

    Solid freeform fabrication processes (SFF) have been the subject of much research and discussion within recent years. Unlike other near net shape manufacturing processes (i.e. conventional injection molding, casting, or bulk machining), SFF techniques fabricate parts "from the ground up" by the …

    arizona-thes Repository record for Injection solid freeforming of polymer and ceramic composite materials (opens in a new tab)

  6. Fabrication & Mechanical Properties of Hastelloy-X Matrix Ceramic Composite

    … based colloid to fabricate the metal matrix composites. Various fabrication processes, some using vacuum and pressure to assist the flow were utilized to infiltrate the scaffolds. The green composites were then cured at the required room or elevated temperature. Composites were characterized …

    embry-riddle Repository record for Fabrication & Mechanical Properties of Hastelloy-X Matrix Ceramic Composite (opens in a new tab)

  7. Synthesis and characterization of multi-phase glass-ceramic composite materials

    Multi-phase glass-ceramic composite materials have been proposed as potential nuclear waste forms for high-level (nuclear) waste (HLW) and they are envisaged to sequester more nuclear waste elements compared to glasses or ceramics. Rare-earth (RE) phosphates (e.g. monazite (LaPO4), xenotime (YPO4), …

    sask Repository record for Synthesis and characterization of multi-phase glass-ceramic composite materials (opens in a new tab)

  8. Fabrication of ceramic and ceramic composite microcomponents using soft lithography

    … project is set out to develop a high precision ceramic fabrication approach suitable for mass production, and to meet the needs of microengine application. A group of new processes have been developed and the results are characterized for fabrication of high precision ceramic oxides and …

    birmingham Download PDF for Fabrication of ceramic and ceramic composite microcomponents using soft lithography (opens in a new tab)

  9. Processing and properties of aligned carbon nanotube/glass ceramic composite

    … attempts to produce carbon nanotube (CNT) ceramic composites have resulted in poorly dispersed, unaligned and non-continuous CNTs in the composites with modest improvements in properties. The research presented in this thesis pertains to the production of dense aluminoborosilicate (ABS) …

    oxford Repository record for Processing and properties of aligned carbon nanotube/glass ceramic composite (opens in a new tab)

  10. Deformation and Fracture Analysis of Bio-inspired Ceramic Composite Materials

    Ceramics are inherently strong and stiff but suffer from intrinsic brittleness, which restricts their structural applications. Inspired by biological materials such as nacre, bone, and crustacean exoskeletons, this thesis investigates the design, fabrication, and fracture behaviour of bio-inspired …

    bristol Repository record for Deformation and Fracture Analysis of Bio-inspired Ceramic Composite Materials (opens in a new tab) Embargoed until 2027-03-17

  11. "Examination of Several Potential ""Transformation Weakeners"" for Ceramic-Composite Interfaces"

    … broaden the use of transformable interphases in ceramic composites, investigations were conducted towards identifying several displacive phase transformations which could potentially be used in composites with alumina, YAG, and/or mullite. Phase transformations were examined in four materials: …

    uiuc Repository record for "Examination of Several Potential ""Transformation Weakeners"" for Ceramic-Composite Interfaces" (opens in a new tab)

  12. Wear of carbon ceramic composite brushes under high loads and densities

    … examines sliding wear behavior of a new carbon ceramic composite material under high current densities and high loads. Wear of conventional carbon-graphite and copper-graphite carbon brushes usually increase with current density. Higher wear rates were explained partially by high temperatures in …

    texas Repository record for Wear of carbon ceramic composite brushes under high loads and densities (opens in a new tab) Restricted access

  13. Fabrication of AlN-MgO-MgAl2O4 ceramic composite by spontaneous reactive infiltration

    Aluminum nitride ceramics are in high demand in electronic industries as substrate materials for applications requiring high thermal conductivity. Sintering and hot pressing are the most common processing methods used to make dense AlN ceramics. However, all methods of AlN sintering involve high …

    concordia Download PDF for Fabrication of AlN-MgO-MgAl2O4 ceramic composite by spontaneous reactive infiltration (opens in a new tab)

  14. Development of Synthetic Polymeric and Ceramic Composite Constructs for Bone Tissue Engineering

    … develop biomaterials that combine biocompatible ceramics and synthetic polymers that can better recapitulate the complex architecture and composition present in native bone. In this thesis, we seek to develop bone tissue engineering strategies that leverage ceramics and synthetic polymers. First, …

    rice Repository record for Development of Synthetic Polymeric and Ceramic Composite Constructs for Bone Tissue Engineering (opens in a new tab)

  15. Laser Deposition Additive Manufacturing of Multi-Material and Metal-Ceramic Composite Structures

    The increasing performance requirements of modern industrial systems, coupled with the imperative for decarbonization, necessitate a fundamental rethinking of metallic component design and manufacturing. Traditional materials, with their inherent limitations in property optimization, susceptibility …

    wvu Repository record for Laser Deposition Additive Manufacturing of Multi-Material and Metal-Ceramic Composite Structures (opens in a new tab)

  16. A multiscale computational framework for ceramic composite structures with localized material nonlinearity

    Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2025-03-28 without embargo terms

    uiuc Repository record for A multiscale computational framework for ceramic composite structures with localized material nonlinearity (opens in a new tab)

  17. Flexible Polymer-Ceramic Composite Materials for High Sensitive Pressure Sensing Applications in Harsh Environments

    … that are composed of a 2:2 laminar polymer-ceramic composite. The composite was composed of four distinct layers, which consist of a polyimide support (Kapton film), patterned Pt electrodes, a compliant elastomer layer, and a ceramic dielectric layer (HfO2). Three different capacitive sensor …

    wvu Repository record for Flexible Polymer-Ceramic Composite Materials for High Sensitive Pressure Sensing Applications in Harsh Environments (opens in a new tab)

  18. Cast Metal-Ceramic Composite Lattice Structures for Lightweight, Energy Absorbing, and Penetration Resistant Applications

    … We first produced lightweight cast metal-ceramic composite panels of 225 x 225 x 60 mm. Our AM molds included provisions to install ceramic or hard metal tiles before pouring the molten metal. The tiles were encapsulated in the final casting to yield a composite structure. The initial …

    vt Repository record for Cast Metal-Ceramic Composite Lattice Structures for Lightweight, Energy Absorbing, and Penetration Resistant Applications (opens in a new tab)

Page 1 of 8