Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Ceramic foams"”.

  1. Modelling mixed matrix membranes and ceramic foams with application to separation processes

    … a novel method for digitally reconstructing foams was developed utilizing the Laguerre Tessellation approach, which shows a remarkable ability to describe foamy materials comprised of macrovoids with polyhedral shapes [1]. Furthermore, to describe foamy materials with macrovoids of spherical …

    greece Repository record for Modelling mixed matrix membranes and ceramic foams with application to separation processes (opens in a new tab)

  2. Wet steam drying: Microwave-assisted droplet evaporation in open-cell ceramic foams

    … As novel fine separators, solid open-cell foams are a promising alternative for the separation of liquid droplets suspended in gas flows at comparably low pressure drops. Using susceptors, such as dielectric materials, for the skeleton and exposing them to microwaves is an efficient way to …

    qucosa-diss

  3. Modeling and evaluation of thermo-mechanical properties of open-cell ceramic foams for metal melt filtration

    Open-cell ceramic foams are used in metal melt filtration processes to clean and calm the liquid melt. Due to the high temperatures and pressure of the melt, thermo-mechanical stresses occur in the filter structures, which require a corresponding evaluation of strength, deformation, and failure. …

    qucosa-diss

  4. Design of porous medium burners by means of additive manufacturing

    The stochastic morphology of ceramic foams and discrepancies between specimens of the same type complicate the creation of numerical models during the design and optimization of porous medium burners. A favourable solution, from the modelling point of view, is the application of an ordered diamond …

    ets-quebec Download PDF for Design of porous medium burners by means of additive manufacturing (opens in a new tab)

  5. Forced convective heat transfer through open cell foams

    … forced convection of air through open cell foams. It can be numerically investigated either by implementing the time efficient macroscopic models or computationally expensive microscopic models. However, during the course of this study, it was observed that the macroscopic models are not …

    qucosa-diss

  6. Formulation of porous catalyst supports: formulation, manufacturing, testing and performance modelling

    … has been an increasing interest in the use of ceramic foams as catalysts supports. In this work, new formulations of directly foamed ceramic suspensions were developed. These presented benefits in terms of both environmental impact and pH operating window. The performances of the new …

    birmingham Download PDF for Formulation of porous catalyst supports: formulation, manufacturing, testing and performance modelling (opens in a new tab)

  7. Desenvolvimento de filtros cerâmicos impregnados com nanopartículas de prata para desinfecção de água potável

    … silver nanoparticles were deposited on alumina foams through three routes: sputtering DC, dip coating and in situ chemical reduction of silver nitrate. The depositions were characterized through X-ray diffraction, scanning electron microscopy and EDS element mapping. The influence of the …

    brazil-ufrn Repository record for Desenvolvimento de filtros cerâmicos impregnados com nanopartículas de prata para desinfecção de água potável (opens in a new tab)

  8. Low-temperature sintering and fabrication research of ceramics and numerical simulation on elastic, pressure drop and heat transfer properties of open cell foams

    … of V2O5 on the sintering behavior of ZnO-TiO2 ceramics and cermets was studied as a function of additive percentage and sintering temperature. Then porous alumina ceramics with different porosity were fabricated by two different methods. For both of two methods, the bulk density, porosity, and …

    missouri Repository record for Low-temperature sintering and fabrication research of ceramics and numerical simulation on elastic, pressure drop and heat transfer properties of open cell foams (opens in a new tab)

  9. Análise do comportamento mecânico de espumas cerâmicas a base de alumina obtidas pelo método da réplica

    Ceramics with porous cellular structure, called ceramic foams, have a potential use in several applications, such as: thermal insulation, catalyst supports, filters, and others. Among these techniques to obtain porous ceramics the replication method is an important process. This method consists of …

    brazil-ufrn Repository record for Análise do comportamento mecânico de espumas cerâmicas a base de alumina obtidas pelo método da réplica (opens in a new tab)

  10. Tunable Compressive Mechanical Behavior of Ice-Templated Materials

    … hierarchical microstructures in engineering ceramics akin to that observed in natural materials. Ice-templating has emerged as a potential technique to fabricate bioinspired hierarchical materials. This process involves simultaneous unidirectional solidification and phase segregation of …

    odu Repository record for Tunable Compressive Mechanical Behavior of Ice-Templated Materials (opens in a new tab)

  11. Synthesis and Characterization of Thermally Insulating Silica-Alumina Foams

    … is on developing a new class of silica-alumina foams (SAF) for thermal insulation applications. Specifically, using earth-abundant materials such as quartz and corundum powders as precursors, a simple, but effective low energy direct foaming based method for synthesis of thermally insulating …

    arizona-thes Repository record for Synthesis and Characterization of Thermally Insulating Silica-Alumina Foams (opens in a new tab)

  12. Joining of Ceramics and Ceramic Matrix Composites (CMC) for Aerospace and Energy Applications

    SiC-based ceramics and composites (SiC, C/SiC & SiC/SiC) are more and more extensively used as advanced materials for aerospace and energy applications. Existing applications are expanding continuously and require advanced materials, design and joining technologies. The objective of this thesis was …

    poli-torino Repository record for Joining of Ceramics and Ceramic Matrix Composites (CMC) for Aerospace and Energy Applications (opens in a new tab)

  13. Materials and reactors for solar thermochemical processes

    … Fe2O3- and CuO-based mixed oxides, both from a ceramics industry and laboratory-synthesized, were experimentally evaluated. Aluminum-Silicon (Al-Si) mixed oxides were added as a binding agent, to improve the mechanical properties of the materials. Catalytic materials based on abundant, …

    greece Repository record for Materials and reactors for solar thermochemical processes (opens in a new tab)

  14. Thermal properties of polymer derived Si-O-C-N ceramics

    … thermal properties of Si-based polymer derived ceramics (PDCs) at elevated temperatures and to classify the main factors affecting the thermal transport through these ceramics. The polymer derived ceramics with the chemistry Si- O-C-N were prepared starting from commercial polycarbosilane, …

    trento Repository record for Thermal properties of polymer derived Si-O-C-N ceramics (opens in a new tab)

  15. Production and characterization of three-dimensional, cellular, Metal-filled ceramics

    … Three dimensional silicon carbide (SiC) ceramic foams were employed as reinforcement for producing an aluminum alloy metal matrix composite with potential as a base plate material in electronic packaging. These are commonly manufactured with aluminum/silicon carbide (Al/SiC) particulate …

    concordia Download PDF for Production and characterization of three-dimensional, cellular, Metal-filled ceramics (opens in a new tab)

  16. Transport and Chemical Phenomena in a Solar Thermochemical Reactor to Split Carbon Dioxide and Water to Produce Synthesis Gas

    … gas phase heat recuperation, a counterflow, ceramic heat exchanger filled with alumina reticulated porous ceramic was designed to operate at 1773 K. The focus of the modeling was selection of the morphology of the reticulated porous ceramic/ foam to balance heat transfer and pressure drop. …

    umn Repository record for Transport and Chemical Phenomena in a Solar Thermochemical Reactor to Split Carbon Dioxide and Water to Produce Synthesis Gas (opens in a new tab)

  17. Pěnové keramické bioaktivní materiály – výrobní postupy, zkoušení vlastností a aplikace

    Porézní materiály pro tkáňové inženýrství jsou novou skupinou materiálů, ktré poskytují některé unikátní vlastnosti, zejména bioaktivitu, biodegradabilitu a osteokonduktivitu. Keramické porézní struktury pro náhrady kostí se zdají mít značný potenciál pro aplikace v medicínské praxi. Bioaktivní …

    brno-tech Repository record for Pěnové keramické bioaktivní materiály – výrobní postupy, zkoušení vlastností a aplikace (opens in a new tab)