Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"Cerium oxide (CeO2)"”.
-
Probing electrochemical functionality on the nanoscale via current detection approaches
… electrolyte or stabilising interface; thin film cerium oxide (CeO2), a material that has several important applications relying on its electrochemical activity including catalysis and solid fuel cell components; and proton-exchanged congruent lithium niobate, which has applications in non-linear …
-
Analysis and Comparison of the Photodecomposition Reaction of Methanol on CeO2 Impregnated TiO2 Surfaces Versus Bare TiO2 Surfaces
Titanium dioxide (TiO2) has been well-studied primarily due to its unique photocatalytic activity. Different preparation techniques have been developed to increase its photocatalytic activity by various means, including simply increasing the surface area, changing the makeup of the framework, and …
-
Exploring the Impact of Catalyst Supports on Hydrogenolysis of Polyolefins over Cobalt-Based Catalyst
… catalysts on three supports: Zinc Zirconium Oxide (ZnZrO), Cerium Oxide (CeO2), and Titania (TiO2). The reaction is conducted under batch conditions at 275°C and 30 bar H2 pressure, with reactions performed for periods ranging from 30 minutes to 32 hours. Our findings reveal that cobalt …
-
Synthesis and design of nanocrystalline metal oxides for applications in carbon nanotube growth and antioxidants
… Recently, the popularity of magnetic iron oxide and cerium oxide (CeO2) nanocrystals enables researchers to use magnetic iron oxides (magnetite and ferrites) in size dependent magnetic separation and CeO2 as an automobile exhaust gas catalyst. This research shows production of …
-
Manipulation of Conducting Oxides and Their Rational Design for Use in Photonics
Transparent conducting oxides (TCOs) have been largely studied for their applications in light emitting diodes (LEDs), photodetectors, solar cells, and other photonic uses. TCOs are useful as they can be doped or alloyed to tune specific properties such as photoluminescence (PL), allowing them to …
-
Exploration of nanostructured cuprous oxide for sensing and purification
… chemical changes of electrodes based on metal oxide nanostructures and their efficiency in converting energy. Electrochemical sensor was utilized to determine the analytical concentration of several components of the analyte solution, including dopamine, glucose, and hydrogen peroxide, among …
-
Solution-processed Cerium Oxide-based Nanocrystals for Multi-functional Applications
Metal oxide nanocrystals can be designed for various applications through tuning their composition, morphology, size, and crystallinity. In particular, cerium oxide (CeO2) is a multi-functional material with unique oxygen storage/release capacity, originating from the intrinsic redox property. …
-
Cerium Oxide Based Interlayer and Cathode Materials for High Performance Lithium Sulfur Battery
… to design advanced lithium sulfur battery. Cerium oxide (CeO2) has remarkable polysulfide adsorption capability and has been recently investigated in lithium sulfur battery application and novel catalyst design. With the goal of bridging towards commercialization of lithium sulfur battery, …
-
CONTRIBUTION OF NANOPARTICLE-INDUCED MEMBRANE POTENTIAL ALTERATION IN VARIOUS MODELS OF CELL TOXICITY
… and consumer products. Among them, titanium dioxide (TiO2), zinc oxide (ZnO), and cerium oxide (CeO2) have the second, third, and sixth highest global production rates with extensive applications in consumer products. While it is assumed that current use of various NP is safe, an uncertainty …
-
CONTRIBUTION OF NANOPARTICLE-INDUCED MEMBRANE POTENTIAL ALTERATION IN VARIOUS MODELS OF CELL TOXICITY
… and consumer products. Among them, titanium dioxide (TiO2), zinc oxide (ZnO), and cerium oxide (CeO2) have the second, third, and sixth highest global production rates with extensive applications in consumer products. While it is assumed that current use of various NP is safe, an uncertainty …
-
Biomedical Applications of Nanoceria : Biocatalytic Mechanisms for pH-Driven Behaviour and Morphological Design
… treat the resultant pathologies. To these ends, cerium oxide (CeO2) has attracted considerable attention because it can act as a biocompatible antioxidant and prooxidant that can eliminate or create ROS under basic and acidic conditions, respectively, thereby offering the potential to regulate …
-
Synthesis and characterization of rare earth ceramic nanomaterials
… in this dissertation are classified as non-oxide ceramic materials. These materials are synthesized using low pressure chemical vapor deposition (LPCVD). The synthesis of erbium tetraboride (ErB4) and erbium hexaboride (ErB6) by a palladium nanoparticle-assisted synthetic technique is …
-
Bottom up Approach: An Efficient Fabrication of CeO2 Thin Films for High Performance Resistive Random Access Memories
… random access memories (RRAMs) based on metal oxide thin films have unique advantages over conventional non-volatile memories. In particular, RRAM exhibits two resistances states that can be switched by an external bias and this process is referred as resistive switching process. The resistive …
-
Carbon Dioxide Reduction by Cerium Oxide Supported Metal Catalysts with Surface Modification
The defects-rich cerium oxide (CeO2) supported metal oxide or metal catalysts (Cu, Co, Ni, Fe, Mn and Ru) for catalytic CO2 reduction were studied. For comparison, thermal catalysis, plasma catalysis and electrocatalysis techniques were carried out under various equilibrium and non-equilibrium …
-
Tuning the electronic and structural properties of cerium oxide nanoparticles for the H2 production photocatalytic reaction
… a strong interest in the past last years. Cerium oxide (CeO2−𝑥, 0 < x < 0.5) is a material recently investigated as a possible photocatalyst to obtain H2 from H2O. In this work, cerium oxide nanoparticles with high surface area (104 < S𝐵𝐸𝑇 < 201 m2/g), high pore volume (32 < V < 132 mm3/g) …
-
Synthesis, characterization, and evaluation of innovative catalyst systems for ethylene production through the oxidative coupling of methane
… investigated using un - modified and modified cerium-based catalysts, using simultaneously methane and oxygen as feed. The reaction was carried out at atmospheric pressure, between 600 and 870oC. In addition to the OCM process, the adsorption (and desorption) of ethylene and the valorization of …
-
Σύνθεση, χαρακτηρισμός και καταλυτική συμπεριφορά νανοδομημένων υλικών CeO2-ZrO2, CeO2-SiO2, CeO2-Al2O3
… of secondary alcohols. For this purpose, mixed oxides were synthesized with reference oxide of cerium oxide (CeO2) and zirconium oxide (ZrO2), silica (SiO2) and alumina (Al2O3) as additives. The synthesis was made using the hydrothermal method, and mixed oxides were also produced by …
-
The Detection of Antibiotic Drugs in Aquatic Environments: Developing Sensitive Electrochemical Sensors Engineered from Transition Metal Dichalcogenides, Spinels, and Advanced Carbon Materials
… transition metal dichalcogenides (TMDs), spinel oxides, and carbon-based materials (reduced graphene oxide (rGO), carbon particles (CPs), and carbon nanofibres (CNFs)), and the novelty of this thesis lies in systematically comparing how these TMD/spinel/carbon materials, prepared via simplified …
-
Transport of Nanoparticles in Porous Media by Numerical Simulations
… results from the computational model for Cerium oxide (CeO2) particles, suspended in potassium chloride (KCl) solutions with different concentrations, were verified against experimental results. The model was then employed to investigate the effects of ionic strength, pore velocity, and …
-
Elucidation of the kinetics of the redox reaction of highly reducible CeO2-x (0 < x < 0.5) nanoparticles
The cerium oxide CeO2-x (0 < x < 0.5) has been strongly studied due to the high technological potential for several applications. CeO2-x presents high facility to change the oxidation state between Ce(III) (x = 0.5) and Ce(IV) (x = 0). The CeO2 (Ce(IV) oxidation state) presents the fluorite-type …
Page 1 of 2