Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 133 for “"Cermet"”.
-
A GaAs cermet gate charge-coupled device
… and evaluation of a 64-pixel, 4-phase GaAs cermet gate charge-coupled device ( CMCCD ) are described. It is demonstrated that the signal charge confinement and the signal charge capacity of the CMCCD are maximized when thin, highly doped active layers are used for implementing the device. …
-
Erosion-corrosion of WC-Co-Cr cermet coatings
The erosion-corrosion characteristics of a WC-Co-Cr coating were assessed under an impinging jet of 3.5% NaCl solution at a velocity of 12 ms-1 both free from solids and containing solids up to 2500 mg/l at a range of impingement angles. The total weight loss increased with increasing solids in the …
-
Consolidation of Cermet Coatings by Cold Gas Dynamic Spraying
Metal-ceramic (Cermets) materials that combine properties of both: high hardness, high wear resistance, and high working temperatures of ceramics and the ductility, toughness, and heat conductance of metals. Cold gas dynamic spraying, or simply cold spray, is a solid state thermal spray process …
-
Investigation of Coal Syngas Impurity Tolerance of Alternative Cermet SOFC Anodes
… to 10 ppm PH3 than the traditional Ni/YSZ cermet anode with the major cause of degradation being localized de-lamination at the anode/electrolyte interface and densification and de-lamination of the Pt contact from the anode. Unlike the Ni/YSZ anode, the SMM anode constituents were not …
-
Multiphysics Design and Simulation of a Tungsten-Cermet Nuclear Thermal Rocket
… methods of analysis to the design of a tungsten-cermet Nuclear Thermal Rocket (NTR) core. An NTR is one of the most viable propulsion options for enabling piloted deep-space exploration. Concerns over fuel safety have sparked interest in an NTR core based on tungsten-cermet fuel. This work …
-
Development of a New Type of Composite Material: A Glass Based Laminate Cermet
… composite - a majority glass based laminated cermet or GMET (Glass-Metal Laminate.) A GMET exhibits extraordinary qualities: strength to density ratio's up to 80% greater than 6061 aluminum alloy, and uniquely, bulk toughness/fracture toughness similar to that alloy, and astonishingly, tensile …
-
High temperature oxidation of metal, alloy and cermet powders in HVOF spraying process
In thermal spraying, the coatings, alloys and metals oxidise during the spraying process. Oxidation often results in a decrease in the mechanical and corrosion properties of the coating. In this study, oxidation of HVOF coatings is examined. In the beginning of the study, the HVOF spraying process …
-
Improving electrochemical performance of Nickel - Yttria stabilized Zirconia cermet anodes employing nickel nanoparticles
Nickel-Yttria Stabilized Zirconia (Ni-YSZ) cermets are used as anodes in solid oxide fuel cells. These anodes are stable for tens of thousands of hours during operation and have low cost. In this work, Ni-YSZ anodes are infiltrated with nickel nanoparticles to increase the density of …
-
Mechanisms of voltage controlled reactive sputtering and physical properties of reactively sputtered cermet films
… optical properties of A1/A1N granular metal (or cermet) films produced by this technique. Experiments are described in which an A1 target is sputtered in Ar/N₂ and Ar/O₂ atmospheres. The relationships between chemical processes occurring on the target surface, substrate surface, and in the glow …
-
The electrical properties of pure manganese and manganese/magnesium fluoride cermet thin film resistors
Pure Mn and Mn/MgF2 cermet films (50 to 1500A thick) containing between 10 and 100 Wt % Mn have been prepared by single boat evaporation in vacuo =< 10^(-5) torr. All films studied are ohmic, and the resistivity lying between 100 µΩ-cm and 10 mΩ-cm. Within this range, the resistivity decreases …
-
Obtención y caracterización termomecánica de laminados Cermet / Metal duro y Metal duro / Metal duro
Los metales duros, como el WC-Co, y los cermets son materiales ampliamente utilizados en la fabricación de herramientas. Sin embargo, los WC-Co tienden a experimentar una disminución en sus propiedades mecánicas a temperaturas elevadas, mientras que la fragilidad inherente de los cermets limita su …
-
A study of the microstructure and optical properties of thin load- dielectric cermet films
… radio frequency-sputtered, thin lead-dielectric cermet films. Once defined, this microstructure is used to obtain theoretical film refractive indices. The Maxwell Garnet theory provides a basis for the theoretical results. Measurements of film transmission and reflectivity are used to obtain …
-
Fabrication, Thermophysical, and Mechanical Properties of Cermet and Cercer Fuel Composites for Nuclear Thermal Propulsion
… based fuels, namely ceramic-<br />metallic (cermet) and ceramic-ceramic (cercer) composites are both promising fuel<br />element material candidates for NTP. Given the high temperature nature, these<br />materials are difficult to fabricate and very little thermophysical and mechanical<br …
-
Fabrication and characterisation of nickel/yttria stabilised zirconia cermet anodes for solid oxide fuel cells
… Nickel/yttria stabilised zirconia (YSZ) cermet systems are employed as anode materials in high temperature solid oxide fuel cell (SOFC) applications. The ionically conducting YSZ powder was modified, by sintering and milling to vary the particle distribution. This allowed the fabrication …
-
DEVELOPMENT OF ADAPTIVE PVD COATED ADVANCED COMPOSITE (CERMET) TOOLS FOR HIGH-SPEED DRY MACHINING OF STAINLESS STEEL
… to realize productivity targets. Therefore, a cermet tool material was selected for the present study because of its high temperature resistance, high bending strength, and fracture toughness. The study focused on investigating wear mechanisms and developing a coating on a cermet tool for dry …
Page 1 of 7