Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 149 for “"Charge-pump"”.

  1. Fully integrated CMOS charge pump design

    Due to the continuous power supply reduction, Charge Pumps, also referred to as DC-DC converters, circuits are widely used in integrated circuits (ICs) to generate high voltages for many applications, such as EEP-ROMs, Flash memories for programming and erasing of the floating gate, switched …

    texas Repository record for Fully integrated CMOS charge pump design (opens in a new tab)

  2. Design of charge pump phase locked loop

    … integrated together. Phase Frequency Detector, Charge Pump, Low Pass Filter, VCO, Frequency Divider and Level Shifter topologies and circuits are described in detail along with some major design tradeoffs and critical issues. The uses and implementation of two kind of frequency divider is …

    ttu Repository record for Design of charge pump phase locked loop (opens in a new tab)

  3. Charge Pump Circuits For Dielectric Elastomer Generators

    … of two circuits which achieve this synchronized charge transfer automatically, while also providing voltage boosting. First a review of existing generator technologies is performed followed by the fundamentals of electrostatic generation. Next, areas where improvement is needed are identified and …

    auckland-ms Repository record for Charge Pump Circuits For Dielectric Elastomer Generators (opens in a new tab)

  4. Low-power Charge-pump Based Switched-capacitor Circuits

    In this thesis, low-power charge-pump (CP) based switched-capacitor (SC) circuits are proposed. The approach is validated in SC integrators and gain stages, and is shown to achieve power savings compared to conventional SC circuits. For the same thermal noise and settling performance, a CP based …

    toronto-retro Repository record for Low-power Charge-pump Based Switched-capacitor Circuits (opens in a new tab)

  5. An adiabatic charge pump based charge recycling design style

    <p>A typical CMOS gate draws charge equal to C[subscript L]Vdd2 from the power supply (Vdd) where C[subscript L] is the load capacitance. Half of the energy is dissipated in the pull-up p-type network, and the other half is dissipated in the pull-down n-type network. Adiabatic CMOS circuit reduces …

    iastate Repository record for An adiabatic charge pump based charge recycling design style (opens in a new tab)

  6. A Low Power FinFET Charge Pump For Energy Harvesting Applications

    … as wireless sensors or wearable electronics. A charge pumps is a circuit used to convert a power supply to a higher or lower voltage depending on the specific application. Charge pumps are generally seen in memory design as a verity of power supplies are required for the newer memory …

    iupui Repository record for A Low Power FinFET Charge Pump For Energy Harvesting Applications (opens in a new tab)

  7. An integer-N charge-pump phase-locked loop with controllable phase offset

    … controlling the phase-offset at the output of a charge-pump PLL (CPLL) by setting the current mismatch in the charge-pump module.

    uiuc Repository record for An integer-N charge-pump phase-locked loop with controllable phase offset (opens in a new tab)

  8. An Area Efficient Thermal Energy Harvester with Reconfigurable Capacitor Charge Pump for IoT Applications

    … techniques. First, the reconfigurable capacitor charge pump distributes on-chip capacitors to required step-up stages. This approach optimizes the silicon area by utilizing 100% on-chip capacitors regardless of a charge pump conversion gain. Second, the design is capable of 3 dimensional Maximum …

    tamu Repository record for An Area Efficient Thermal Energy Harvester with Reconfigurable Capacitor Charge Pump for IoT Applications (opens in a new tab)

  9. Design and analysis of a 1.28ghz charge pump phase-locked loop in 180nm technology node

    Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2024-09-16 without embargo terms

    uiuc Repository record for Design and analysis of a 1.28ghz charge pump phase-locked loop in 180nm technology node (opens in a new tab)

  10. A low power prescaler, phase frequency detector, and charge pump for a 12 ghz frequency synthesizer

    … but extremely power efficient nano-watt charge pump is also implemented for additional power savings. Furthermore, a state of the art 16/17 prescaler using Current Mode Logic (CML) D-Flip Flops, CMOS inverters, and transmission gates has been optimized for maximum power savings. The …

    tamu Repository record for A low power prescaler, phase frequency detector, and charge pump for a 12 ghz frequency synthesizer (opens in a new tab)

  11. Investigation into the operation of the single-stage current source charge-pump power factor correction system

    … provided, and it is shown why the Current Source Charge Pump PFC (CSCP-PFC) is a convenient method to implement for AC-DC conversion systems. A review of state of the art in the CSCP-PFC systems and the technologies underpinning this system are reported. In addition, the inconsistencies in the …

    whiterose Download PDF for Investigation into the operation of the single-stage current source charge-pump power factor correction system (opens in a new tab)

  12. A methodology for designing 2.45 GHz wireless rectenna system utilizing Dickson Charge Pump with Optimized Power Efficiency

    … have proposed methodology of two stages Dickson charge pump, which is capable of harvesting energy at 2.45 GHz RF signal to power any low powered device. Presented design uses a simple and inexpensive circuit consisting of four microstrip patch antennas, some zero-bias Schottky diodes, Wilkinson …

    waterloo Repository record for A methodology for designing 2.45 GHz wireless rectenna system utilizing Dickson Charge Pump with Optimized Power Efficiency (opens in a new tab)

  13. A Charge Pump Architecture with High Power-Efficiency and Low Output Ripple Noise in 0.5 μm CMOS Process Technology

    … a single voltage battery-operated power supply. Charge pump is an inductorless DC-DC converter which generates higher positive voltage or lower voltage or negative voltage from the applied reference voltage. A charge pump circuit uses switches for charge transfer action and capacitors for charge …

    rit Repository record for A Charge Pump Architecture with High Power-Efficiency and Low Output Ripple Noise in 0.5 μm CMOS Process Technology (opens in a new tab)

  14. Development of a Variable Roller Pump and Evaluation of its Power Saving Potential as a Charge Pump in Hydrostatic Drivetrains

    Predložená doktorandská dizertačná práca (ďalej len práca) sa zaoberá rozsiahlou analýzou valčekového hydrogenerátora s premenlivým geometrickým objemom a predikciou výkonových úspor dosiahnutých aplikáciou navrhnutého valčekového hydrogenerátora s premenlivým geometrickým objemom v hydrostatickom …

    brno-tech Repository record for Development of a Variable Roller Pump and Evaluation of its Power Saving Potential as a Charge Pump in Hydrostatic Drivetrains (opens in a new tab)

  15. Design of a Radial Mode Piezoelectric Transformer for a Charge Pump Electronic Ballast with High Power Factor and Zero Voltage Switching

    In a conventional electronic ballast for a fluorescent lamp, inductor-capacitor-transformer tank circuit is used. A Piezoelectric Transformer (PT) can potentially be used to replace such a tank circuit to save space and cost. In the past, ballast design using a PT requires selecting a PT from …

    vt Repository record for Design of a Radial Mode Piezoelectric Transformer for a Charge Pump Electronic Ballast with High Power Factor and Zero Voltage Switching (opens in a new tab)

  16. A Charge-Recycling Scheme and Ultra Low Voltage Self-Startup Charge Pump for Highly Energy Efficient Mixed Signal Systems-On-A-Chip

    … of a digital circuit through the use of charge-recycling and dynamic supply-voltage scaling techniques. The novel charge-recycling scheme proposed in this research demonstrates the feasibility of operating digital circuits using the charge scavenged from the leakage and dynamic load …

    utk-theses Repository record for A Charge-Recycling Scheme and Ultra Low Voltage Self-Startup Charge Pump for Highly Energy Efficient Mixed Signal Systems-On-A-Chip (opens in a new tab)

  17. A Novel, 2.4 and 5.8GHz Dual-band, 2-Stage RF-DC Charge-pump with Load-tuned Transmission Lines for DC Output Boost

    A dual-band, RF-DC charge pump without external matching network for wireless energy harvesting in 2.4 and 5.8 GHz bands is proposed. The first novelty here is in the use of optimal length transmission lines on the load side of the 4 half-wave rectifying stages that make up the 2-stage RFCP …

    calgary Repository record for A Novel, 2.4 and 5.8GHz Dual-band, 2-Stage RF-DC Charge-pump with Load-tuned Transmission Lines for DC Output Boost (opens in a new tab)

Page 1 of 8