Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"Charpy impact testing"”.

  1. Charpy Impact Testing of Twinning Induced Plasticity and Transformation Induced Plasticity High Entropy Alloys

    … to their equiatomic counterparts. However, impact and fracture resistance of these HEAs has not been studied as much as their other mechanical properties. In this thesis, the hardness, tensile properties, and Charpy impact energy of Al0.3CoCrFeNi, a TWIP HEA, and 50Fe-30Mn-10Co-10Cr (at.%), …

    unt Repository record for Charpy Impact Testing of Twinning Induced Plasticity and Transformation Induced Plasticity High Entropy Alloys (opens in a new tab)

  2. Material toughness analysis of direct metal laser sintered 15-5PH stainless steel

    … also analyzed. The test methods applied included Charpy impact testing, particle analysis, density measurement, specimen dimension measurements, fracture surface analysis, microstructure analysis, and elemental analysis. The results showed that DMLS has significantly lower material toughness and …

    manitoba Repository record for Material toughness analysis of direct metal laser sintered 15-5PH stainless steel (opens in a new tab)

  3. Microstructure and Mechanical Properties of WE43 Alloy Produced Via Additive Friction Stir Technology

    … in the T5 condition. The toughness measured by Charpy impact testing also showed an increase over the base material. The relationships among tensile properties, Vickers microhardness, impact toughness, microstructure and thermal history are developed and discussed.

    vt Repository record for Microstructure and Mechanical Properties of WE43 Alloy Produced Via Additive Friction Stir Technology (opens in a new tab)

  4. Examination of the effect of tin particles and grain size on the charpy impact transition temperature in steels

    … (> 0.5 \(\mu\)m) and ferrite grain size on the Charpy impact transition temperature in high strength low alloyed steels has been carried out. Steels with high (up to 0.045 wt %) Ti content, have been heattreated and furnace cooled to obtain a ferrite-pearlite microstructure with different …

    birmingham Download PDF for Examination of the effect of tin particles and grain size on the charpy impact transition temperature in steels (opens in a new tab)

  5. Retrofitting an FDM Printer for 3D Printing with Cotton Yarn: A Novel Approach and Mechanical Property Evaluation

    … and Young’s modulus (+6.55%). Additionally, Charpy impact testing revealed substantial improvements in resistance to sudden loading. Mercerized cotton–PLA composites achieved a 37% reduction in breakage angle (β) and a remarkable 471.18% increase in absorbed energy (E), highlighting their …

    rit Repository record for Retrofitting an FDM Printer for 3D Printing with Cotton Yarn: A Novel Approach and Mechanical Property Evaluation (opens in a new tab)

  6. Low temperature mechanical properties and fracture toughness (j-integral) of SA.738 GR.B and two nickel steels

    … other low-temperature applications. Mechanical testing included hardness testing, tensile testing, Charpy impact testing, blunt-notch fracture stress testing, and sharp-crack fracture toughness testing, conducted across temperatures ranging from -196 °C to -60 °C. For SA738 Gr.B steel, two heat …

    birmingham Download PDF for Low temperature mechanical properties and fracture toughness (j-integral) of SA.738 GR.B and two nickel steels (opens in a new tab)

  7. Toughening and failure mechanism of composite materials for impact and damage tolerance

    Impact resistance is a material's ability to resist the force of a sudden impact. Compared to static loading, materials are more susceptible to a shock force applied over a short duration. Avoiding the catastrophic failure during impact events is the major challenge in the design of impact …

    msu Repository record for Toughening and failure mechanism of composite materials for impact and damage tolerance (opens in a new tab)

  8. Variable Oxidation & Defects in Ti-6Al-4V Material in Electron Beam Melting Additive Manufacturing

    … oxidized Ti-6Al-4V powder was conducted using Charpy impact testing on consolidated specimens from each wt% O in the bulk powder batches, and finite elemental analysis (FEA) to understand the build defect effect found in solidified Ti-6Al-4V material.

    denver Repository record for Variable Oxidation & Defects in Ti-6Al-4V Material in Electron Beam Melting Additive Manufacturing (opens in a new tab)

  9. The mechanical properties of reinforcing steel bars at low temperature.

    … and #6G40 (sigma ys = 40 ksi). Both tension and Charpy V-notch Impact tests were performed in the present study. The tensile tests were carried out using a portable loading frame. A hydraulic cylinder was used to provide the force necessary to pull the specimen to rupture and the load on the …

    ottawa-retro Repository record for The mechanical properties of reinforcing steel bars at low temperature. (opens in a new tab)

  10. The effect of submerged arc welding parameters on the properties of pressure vessel and wind turbine tower steels

    … measurements, optical microscopy, tensile testing, Charpy impact testing and scanning electron microscopy. It was found that the physical and mechanical properties of the weldments were affected by SAW parameters. Severe undercuts were found at high travel speed and welding current. Low …

    sask Repository record for The effect of submerged arc welding parameters on the properties of pressure vessel and wind turbine tower steels (opens in a new tab)

  11. Failure Mode of an Orthodontic Resin Alone and with Bonded Brackets

    … improvements entailed the use of just one testing apparatus: a static universal testing machine such as the Instron. Metal, ceramic and plastic bonded brackets were tested with the traditional shear/peel method as well as a new high strain rate impact test. The resin itself was also …

    loma-linda Repository record for Failure Mode of an Orthodontic Resin Alone and with Bonded Brackets (opens in a new tab)

  12. EFFECT OF GEOMETRY, CELL SIZE, AND CARBON FIBER REINFORCEMENT ON THE CHARPY IMPACT STRENGTH OF ADDITIVELY MANUFACTURED TPMS LATTICE STRUCTURES

    … structures, with limited attention given to the impact performance of composite- reinforced TPMS structures. The purpose of this study is to determine the effects of geometric configuration (i.e., Schwarz-P, Schwarz-D, and Gyroid), cell size, and carbon fibre composite reinforcement on the impact …

    rit Repository record for EFFECT OF GEOMETRY, CELL SIZE, AND CARBON FIBER REINFORCEMENT ON THE CHARPY IMPACT STRENGTH OF ADDITIVELY MANUFACTURED TPMS LATTICE STRUCTURES (opens in a new tab)

  13. Utveckling av en stötprovningsanordning och testmetod för utvärdering av fästelement under snabba skjuvförlopp

    This thesis aimed to develop a testing method to analyze fast shear deformations and to design an impact testing device to assess the shear strength of screws and bolts. The project was carried out in collaboration with and at the request of Bulten Fasteners AB (BFAB). The request arose from the …

    chalmers Repository record for Utveckling av en stötprovningsanordning och testmetod för utvärdering av fästelement under snabba skjuvförlopp (opens in a new tab)

  14. Metallurgical Evaluation of Cast Duplex Stainless Steels and Their Weldments

    … included critical pitting temperature (CPT) testing, intergranular corrosion (IGC) testing, ASTM A923 (Methods A, B and C), Charpy impact testing, weldability testing (ASTM A494), ferrite measurement and microstructural evaluations.</p> <p>In the study, the corrosion performances of DSS …

    ut-knoxville Repository record for Metallurgical Evaluation of Cast Duplex Stainless Steels and Their Weldments (opens in a new tab)

  15. Characterisation of metallurgical and mechanical properties of friction stir welded low alloy steels for marine applications

    … characterisation, transverse tensile testing, Charpy impact testing and hardness measurements. A preliminary process parameter envelope has been developed and parameter sets established that deliver high integrity welds and enhance the process's techno-economic competitiveness through …

    strathclyde Repository record for Characterisation of metallurgical and mechanical properties of friction stir welded low alloy steels for marine applications (opens in a new tab)

  16. The effect of welding speed on the properties of ASME SA516 grade 70 steel

    … welding; strength, microstructure, hardness and impact toughness of the specimens were examined. Charpy impact testing was performed according to ASTM E 23 on specimens notched in the weld metal (WM) and in the heat-affected zone (HAZ), to measure the impact toughness. Fractography was performed …

    sask Repository record for The effect of welding speed on the properties of ASME SA516 grade 70 steel (opens in a new tab)

  17. Fatigue and Fracture of Electron Beam Melting Ti-6Al-4V

    … mass fraction (0.13 % to 0.47 %) by performing Charpy impact testing and resistance curve (<em>J-R</em>) testing to determine fracture toughness, all while including the effects of specimen orientation and HIP post-processing. The fracture trends showed significant reduction in toughness at the …

    denver Repository record for Fatigue and Fracture of Electron Beam Melting Ti-6Al-4V (opens in a new tab)

  18. Microstructural engineering of modern high strength low alloy steels via advanced thermo-mechanical processing

    … did occur in the lower temperature region of the Charpy impact testing in longitudinal and transversal directions. Finally, a similar processing was implemented to invoke grain refinement coupled with strengthening arising from microalloying. It was found that Mo leads to an increase in hardness …

    unsw Repository record for Microstructural engineering of modern high strength low alloy steels via advanced thermo-mechanical processing (opens in a new tab)

  19. Effect of fly ash particles on the mechanical properties and microstructure of aluminium casting alloy A535

    … treated conditions. Microhardness measurements, Charpy impact testing, tensile testing, optical microscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), inductively coupled plasma/mass spectrometry (ICP/MS), X-ray diffractometry (XRD), and X-ray fluorescence …

    sask Repository record for Effect of fly ash particles on the mechanical properties and microstructure of aluminium casting alloy A535 (opens in a new tab)

Page 1 of 2