Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 66 for “"Chassis dynamometer"”.
-
Control of a chassis dynamometer
<p>Chassis dynamometers are essential tools in testing vehicles in the laboratory. The main purpose of a chassis dynamometer used in emission testing is to simulate vehicle drive wheel torques encountered on the road. The University of Tennessee, Knoxville has an older Sun Electric, model RAM 937, …
-
Development of a heavy-duty vehicle chassis dynamometer test route
A heavy duty vehicle chassis dynamometer driving route, titled "City-Suburban Heavy Vehicle Route" (CSHVR) was developed. Data for designing the CSHVR were collected using a Campbell Scientific 21x. Procedures were developed to reduce statistically the speed and time data into representative speed …
-
COMPARATIVE ANALYSIS OF EFFICIENCY AND OPERATING CHARACTERISTICS OF AUTOMOTIVE POWERTRAIN ARCHITECTURES THROUGH CHASSIS DYNAMOMETER TESTING
… OF AUTOMOTIVE POWERTRAIN ARCHITECTURES THROUGH CHASSIS DYNAMOMETER TESTING" was completed through a collaborative partnership between Michigan Technological University and Argonne National Laboratory under a contractual agreement titled "Advanced Vehicle Characterization at Argonne National …
-
Comparison of engine and chassis dynamometer test methods for three heavy-duty vehicles emissions characterization, A
Includes bibliographical references (pages 135-140).
-
Development of a Hybrid Vehicle Powertrain Test Laboratory
… and tested a fully functional eddy-current chassis dynamometer testing facility on campus. An automotive test facility requires a systems engineering approach to install, calibrate and commission a chassis dynamometer. This thesis shows that, the dynamometer test facility was successfully …
-
Driving Cycle Properties and their Influence on Fuel Consumption and Emissions
… for diverse vehicle operation using either chassis dynamometer or in-use data collected with portable emission measurement systems. The predictive accuracy of the in-use model was improved when using grade-related metrics. Fuel consumption average prediction errors of 5.7% and 3.6% were …
-
Characterizing hydrogen-diesel dual-fuel combustion in a commercial heavy-duty vehicle
… most existing studies are based on engine dynamometer experiments under idealized steady-state conditions, leaving gaps in understanding the constraints of real-world operation and implementation. This study addresses these gaps through an experimental investigation of a retrofit H₂DF …
-
Characterizing the Variability in Particulate Mass Emissions from Current Model Year Diesel and Natural Gas Engines
… and natural gas engines observed during in-use chassis dynamometer testing and compare it with an alternate method of mass measurement involving instantaneous particle size distribution and number count. The study involves the analysis of engine and chassis dynamometer data collected from …
-
Characterization of exhaust emissions from palm oil-based and soybean oil-based biodiesel fueled heavy-duty transit buses
… of the two fuels was accomplished through chassis dynamometer, using West Virginia University's Transportable Heavy-Duty Vehicle Emissions Testing Laboratory (THDVETL) as well as on-board, in-use testing, using WVU's Mobile Emissions Measurement System (MEMS). Performance, fuel economy, and …
-
Design of experiment and analysis techniques for fuel consumption data using heavy-duty diesel vehicles and on-road testing
Chassis dynamometer and on-road testing are usually employed to test vehicle operation. Testing on a chassis dynamometer reduces data variability compared to on-road testing due to the controlled environment but it does not account for other important variables that affects real-world vehicle …
-
Driving resistance analysis of long haulage trucks at Volvo
… tests currently used at Volvo are: road testing, chassis dynamometer and computer simulations. In this project the three fuel consumption test methods are evaluated with the Volvo FH and its main rivals to get an indication of the results reliability. If the test gives different fuel consumptions …
-
Predictive Powertrain Management through Driver Behaviour Recognition
… the use of a closed-loop testing track and a chassis dynamometer. An acceleration test is conducted by applying a wide-open throttle in various operating modes. This identified drive traces that are only achievable in certain modes, thus concluding that if the driver’s behaviour is predicted …
-
Reduction of natural gas engine emissions using a novel aftertreatment system
… Testing Laboratory. A heavy-duty transportable chassis dynamometer and a dedicated "clean" dilution tunnel were used to sample emissions from the vehicle. Past studies indicate that the use of a clean dilution tunnel omits the possibility of background emission concentrations being higher than …
-
Development of a method for determining exhaust emissions and fuel consumption of vehicles in on-road operation
… method, which focuses on the calibration of a chassis dynamometer for use in modeling on-road driving conditions, is demonstrated on a 1988 Chevrolet Corsica and the results are presented for this vehicle. The results support the conclusion that this method is suitable for measuring the …
-
Evaluation of opacity, particulate matter, and carbon monoxide from heavy-duty diesel transient chassis tests
… through snap-acceleration tests and transient chassis dynamometer tests. Emission data were gathered using the West Virginia University (WVU) Transportable Heavy Duty Vehicle Emission Testing Laboratories (THDVETL) and opacity data were collected from two opacity meters; the Wager 650CP full …
-
Investigation of Energy Consumption and Characteristics of a Battery Electric Vehicle
… 2013 Tesla Model S P85 was exercised on a chassis dynamometer along with on road testing consisting of a CAFEE Morgantown Route and Bruceton Mills Route to characterize its energy consumption. Energy consumption data was measured with a current clamp on the positive high voltage battery …
-
The effect of different road load implementation strategies on fuel economy of USPS step vans
… vehicles. WVU implements road loads on the chassis dynamometer using a method described in 40 CFR §86.1229-85. The proposed method requires three variables from the vehicle: maximum height, maximum width and vehicle weight. The issue with this method arises due to the fact that it does not …
-
An Investigation of Wear-Resistant Coatings on an A390 Die-Cast Aluminum Substrate
… second a change in performance using an ATV and chassis dynamometer, third the amount of material lost, through wear, was measured using a profilometer, and finally a scanning electron microscope which was used to identify the dominate mechanism of wear in the sheave material. All of the tests …
-
Driver and Traffic Impact on Battery Electric Vehicle Driving Range
… Vehicle (BEV) is determined from tests on a chassis dynamometer under standardized conditions. However, when a customer is driving his/her car on the road, the energy consumption and range may be significantly different due to many factors, such as driving style, ambient conditions, road, …
-
Análise das emissões gasosas de um veículo flex funcionando com diferentes combustíveis
… tests, a flex vehicle was installed on a chassis dynamometer equipped with a gas analyzer and other complementary accessories according to the standard guidelines of emission and security procedures. Tests were performed according to NBR 6601 and NBR 7024, which define the urban and road …
Page 1 of 4