Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 61 for “"Chemical mechanical planarization (CMP)"”.

  1. Copper Surface Chemistry Relevant to Chemical Mechanical Planarization (Cmp)

    … (TAZ) on copper removal rate during CMP. Removal rates were higher for solutions containing TAZ than solutions containing BTA. The corrosion inhibitor films were characterized using AFM, cyclic voltammetry, impedance spectroscopy, surface-enhanced Raman spectroscopy, and mass …

    uiuc Repository record for Copper Surface Chemistry Relevant to Chemical Mechanical Planarization (Cmp) (opens in a new tab)

  2. Process Optimization and Consumable Development for Chemical Mechanical Planarization (CMP) Processes

    Chemical Mechanical Planarization (CMP) is one of the most critical processing steps that enables fabrication of multilevel interconnects. The success of CMP process is limited by the implementation of an optimized process and reduction of process generated defects along with post CMP surface …

    usf Repository record for Process Optimization and Consumable Development for Chemical Mechanical Planarization (CMP) Processes (opens in a new tab)

  3. Stochastic models for material removal rate (MRR) in chemical mechanical planarization (CMP) process

    … prediction of the material removal rate (MRR) in CMP process to date has been concerned with the ideal case, wherein there is no randomness associated with either the pad or the slurry. In the work of this dissertation, we investigated the material removal rate (MRR) by taking some of the …

    iastate Repository record for Stochastic models for material removal rate (MRR) in chemical mechanical planarization (CMP) process (opens in a new tab)

  4. Process Modeling of a Wire Saw Operation

    … rate is modeled much in the same manner as the Chemical Mechanical Planarization (CMP) process. The goal is to understand the physical mechanisms that limit how thin the wafers can be cut and to determine the sensitivity of cutting time and cutting rate based on process parameters.

    maryland Repository record for Process Modeling of a Wire Saw Operation (opens in a new tab)

  5. Sputter Coating Atomic Force Microscope Cantilevers for Various Research Applications

    … We have used our AFM for capacitance imaging and chemical mechanical planarization (CMP) modeling. Capacitance imaging allows us to effectively image the local dielectric properties of materials. By modeling atomic scale CMP mechanisms we can gain insight to some of the “black-art” of this …

    texas-state Repository record for Sputter Coating Atomic Force Microscope Cantilevers for Various Research Applications (opens in a new tab)

  6. Microwave Characterization of Low-k Dielectric Thin Films using Microstrip Transmission Lines

    … transmission lines both before and after chemical mechanical planarization (CMP). The microstrips are fabricated on wafer samples consisting of a 300 nm low-k thin film, and 100 nm SiC interlayer, using DC magnetron sputtering, laser beam photolithography, and reactive ion etching. In …

    texas-state Repository record for Microwave Characterization of Low-k Dielectric Thin Films using Microstrip Transmission Lines (opens in a new tab)

  7. Electrodeposition of Copper on Ruthenium Oxides and Bimetallic Corrosion of Copper/Ruthenium in Polyphenolic Antioxidants

    … oxides can be formed by applying electrochemical potential. Investigation of Cu under potential deposition on these oxides indicates the similarity between native and reversible oxides by its nature of inhibiting Cu deposition. Irreversible oxide formed on Ru surface is rather conductive …

    unt Repository record for Electrodeposition of Copper on Ruthenium Oxides and Bimetallic Corrosion of Copper/Ruthenium in Polyphenolic Antioxidants (opens in a new tab)

  8. YIELD ENGINEERING AND IMPROVEMENT ON SEMICONDUCTOR DEVICES

    … scanner: referred to as X-leveling Printing 2) Chemical Mechanical Planarization (CMP) using modified hardware inside the polishing tool: referred to as 52 mil CMP Template 3) Improve metal etch: referred to as 10s Metal Over-etch Experiments in the form of split plans were carried to verify the …

    nus Repository record for YIELD ENGINEERING AND IMPROVEMENT ON SEMICONDUCTOR DEVICES (opens in a new tab) Download file for YIELD ENGINEERING AND IMPROVEMENT ON SEMICONDUCTOR DEVICES (opens in a new tab)

  9. Chemical Mechanical Paired Grinding

    <p>Chemical Mechanical Planarization (CMP) is a polishing process that planarizes a surface at both a local and global scale. The multi scale planarization capabilities of CMP are used extensively in the fabrication of Integrated Circuits (IC). Though a relentless reduction of feature scales have …

    iastate Repository record for Chemical Mechanical Paired Grinding (opens in a new tab)

  10. Interfacial Studies of Bimetallic Corrosion in Copper/Ruthenium Systems and Silicon Surface Modification with Organic and Organometallic Chemistry

    … Cu interconnects, dual-damascene techniques like chemical mechanical planarization (CMP) and post-CMP became inevitable for removing the "overburden" Cu and for planarizing the wafer surface. During the CMP processing, Cu interconnects and barrier metal layers experience different electrochemical …

    unt Repository record for Interfacial Studies of Bimetallic Corrosion in Copper/Ruthenium Systems and Silicon Surface Modification with Organic and Organometallic Chemistry (opens in a new tab)

  11. System Integration and Testing using Object Oriented Programming based Control

    … on polyurethane pads that are used in the Chemical Mechanical Planarization (CMP) process. The setup uses a combination of a number of instruments to provide excitation to the pad and measure its response. A computer controls all these instruments using a single application. Microsoft …

    usf Repository record for System Integration and Testing using Object Oriented Programming based Control (opens in a new tab)

  12. Benzocyclobutene-based Electric Micromachines Supported on Microball Bearings: Design, Fabrication, and Characterization

    … (B-LVCM). The design of the electrical and mechanical components of the micromotor, lumped-circuit modeling of the device and electromechanical characteristics, including variable capacitance, force, power, and speed are presented. Electrical characterization of BCB polymers, …

    maryland Repository record for Benzocyclobutene-based Electric Micromachines Supported on Microball Bearings: Design, Fabrication, and Characterization (opens in a new tab)

  13. Study of Copper Electrodeposition on Ruthenium Oxide Surfaces and Bimetallic Corrosion of Copper/Ruthenium in Gallic Acid Solution

    … kinds of oxides, which are native oxide, electrochemical reversible oxide and electrochemical irreversible oxide. Native oxide was formed by naturally exposed to air. Electrochemical reversible oxide was formed at lower anodic potential region, and irreversible oxides were formed at higher anodic …

    unt Repository record for Study of Copper Electrodeposition on Ruthenium Oxide Surfaces and Bimetallic Corrosion of Copper/Ruthenium in Gallic Acid Solution (opens in a new tab)

  14. An Online Strategy for Wavelet Based Analysis of Multiscale Sensor Data

    … monitoring of ultra-precision processes such as chemical mechanical planarization (CMP) in wafer fabrication. However, all of the above mentioned wavelet based methodologies are offline and depend on the visual observations of the wavelet coefficients and details. The offline analysis paradigm …

    usf Repository record for An Online Strategy for Wavelet Based Analysis of Multiscale Sensor Data (opens in a new tab)

  15. Advanced CMP processes for special substrates and for device manufacturing in MEMS applications

    … studies and process developments to utilize the chemical mechanical planarization (CMP) technology in the field of micro electrical mechanical systems (MEMS). Approaches have been undertaken to enable the manufacturing of thick film SOI (silicon-on-insulator) substrates with a high degree of …

    aalto Repository record for Advanced CMP processes for special substrates and for device manufacturing in MEMS applications (opens in a new tab)

  16. Assessing the Cytotoxicity of Engineered Nanoparticles: Applications and Implications

    … applied in two engineered systems: (I) chemical mechanical planarization (CMP) and (II) membrane water treatment. Nanoparticle cytotoxicity is central to both sections: Part I characterizes the interactions of CMP nanoparticles with cell membranes following their use and Part II …

    jhu Repository record for Assessing the Cytotoxicity of Engineered Nanoparticles: Applications and Implications (opens in a new tab)

  17. Tribochemical properties of metastable states of transition metals

    Mechanical forces can be used to trigger chemical reactions through activating bonds and to direct the course of such reactions in organic materials, particularly in polymers. In inorganic materials, the small molecules present significant challenges in directing the reaction kinetics. This …

    tamu Repository record for Tribochemical properties of metastable states of transition metals (opens in a new tab)

  18. Triboelectrochemical Characterization of Microelectronic Materials

    Non-uniformity in chemical-mechanical planarization (CMP) due to diverse pattern geometry in copper damascene structures has been a critical limit to process yield. Fundamental understanding in tribology and electrochemistry is crucial to solve this problem. This research develops novel …

    tamu Repository record for Triboelectrochemical Characterization of Microelectronic Materials (opens in a new tab)

Page 1 of 4