Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 79 for “"Chemical process control"”.
-
Ultrasonic technique for chemical process control
Ultrasound has found application in chemical processing control using both low power, high frequency monitoring techniques and high power, low frequency process enhancement approaches. In many cases, standard ultrasonic systems are retrofitted to a process and while these produce efficiency …
-
Application of feedback linearization to nonlinear chemical process control
… techniques for a nonlinear feedback controller design. A generic nonlinear continuous bioreactor is used as the benchmark test process for the feedback linearizing control strategies. The overall objective of this research is to investigate the applicability of the <i>exact …
-
Filamentous bulking amelioration by chemical process control and interceptor management
… improvement, selective disinfection, pH control and sewer cleaning, and chemical precipitation and odor control. Of these possible solutions, the most attractive options in descending order are found to be passive flushing for cleaning the interceptor, air injection to improve redox …
-
Numerical methods for d-parametric nonlinear programming with chemical process control and optimization applications
The problem of optimization often arises whenever we want to influence a complex system, because we usually want our impact on such a system to be the best it can be in some particular sense. Such complex optimization problems are often accompanied by another problem, however: uncertainty. …
-
MIMO control performance monitoring based on subspace projections
Control performance assessment has been the subject of intense scrutiny over the past 10 years and there are now numerous industrial examples of its value. The terms assessment and monitoring are used almost interchangeably in the literature and this has led to some confusion and debate over the …
-
Towards the performance monitoring of constrained control systems
… of the performance moni toring of SISO and MIMO control systems and the performance monitoring and analysis of MPC control systems. Knowledge of the time delay allows for the com putation of a minimum variance benchmark. A novel time delay estimation method which requires temporarily changing the …
-
Flow and temperature control using advanced strategies
The main objective of a chemical plant is to convert certain raw materials into desired final products in the most economical way. But during its operation, a plant must also satisfy several requirements in the presence of constantly changing external influences. Some ofthe important requirements …
-
In-line pH control and controller performance evaluation
Chemical process control has been dominated by linear control theory and technology over the last few decades. However, the use of linear system techniques is quite limiting, since a significant portion of the chemical processes are inherently nonlinear. Recent advances in computer software and …
-
Nonlinear Closed-Loop System Identification in The presence of Non-stationary Noise Source
… to handle several practical challenges common in chemical process control applications. These challenges include systems running in closed-loop, incorporating non-stationary process disturbances, and with possibly unstable plant dynamics. Identifi cation methods based on the prediction error …
-
Nonlinear process-model-based control and optimization of batch polymerization reactor
… to characterize, a successful polymerization process was one which could reproduce the same recipe for every batch, thus producing reasonable product uniformity from batch to batch. As might be expected, even minor modifications of the recipe produced a different product, so that a great …
-
Sieve plate distillation dynamics
This dissertation is a study of the composition dynamics of a bench size sieve-plate distillation column. The column was 2-3/4 inches in diameter, 30 inches in length, and contained 10 sieve-plates spaced 2-1/4 inches apart. A benzene-toluene mixture was used as the feed to the column. The pulse …
-
Robust model predictive control of linear finite impulse response plants
Model Predictive Control (MPC) has become one of the dominant methods of chemical process control in terms of successful industrial applications. A rich theory has been developed to study the closed loop stability of MPC algorithms when the plant model is perfect, referred to as the nominal …
-
An examination of modified hierarchical design structure for chemical processes
… procedure for the conceptual design of chemical processes with chemical reactions. This was achieved by examining several designs of hydrodealkylation (HDA) of toluene to benzene process (a benchmark case in teaching chemical process design), using the modified and the conventional …
Page 1 of 4