Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"Chemical pulp"”.

  1. Modeling chlorine dioxide bleaching of chemical pulp

    … deals with the phenomenon-based modeling of pulp bleaching. Previous bleaching models typically utilize one or two empirical correlations to predict the kinetics in kappa number development. Empirical correlations are simple to develop, but their parameters are often tied to the validation …

    aalto Repository record for Modeling chlorine dioxide bleaching of chemical pulp (opens in a new tab)

  2. Different approaches to tailoring chemical pulp fibres

    … was to examine different approaches to tailor chemical fibres of different raw materials. The focus in searching for new approaches was on pressure screen fractionation, selective treatment of each fraction, mechanical pre-treatment before refining, refiner loadability and its link to fibre …

    aalto Repository record for Different approaches to tailoring chemical pulp fibres (opens in a new tab)

  3. The aerobic digestion of semi-chemical pulp mill wastes

    Semi-chemical pulp mills discharge large quantities or waste materials into the streams of the nation. If the flow of the stream is such that the waste does not become sufficiently diluted, biological reactions occur which deplete the dissolved oxygen in the stream, sometimes to the point where it …

    vt Repository record for The aerobic digestion of semi-chemical pulp mill wastes (opens in a new tab)

  4. Distribution and redox reactions of certain polyoxometalate anions in chemical pulp suspensions

    … and selectivity of oxygen delignification of chemical pulps. The bleaching concepts presented take advantage of the redox chemistry of POMs: these anions often are able to oxidise residual lignin and are regenerable with O2. So far, factors affecting the reactivity of POM anions in pulp …

    aalto Repository record for Distribution and redox reactions of certain polyoxometalate anions in chemical pulp suspensions (opens in a new tab)

  5. Enhancement of methane production from the anaerobic digestion of chemical pulp and paper mill effluents

    … that are water and energy intensive like pulp and paper (P&P) mills, this is a specifically relevant issue. The large and heterogenous volumes of effluents in P&P mills make it a difficult task to properly treat before discharge. Anaerobic digestion is an efficient wastewater technology …

    aalto Repository record for Enhancement of methane production from the anaerobic digestion of chemical pulp and paper mill effluents (opens in a new tab)

  6. Effect of surface properties of fibres on some paper properties of mechanical and chemical pulp

    … correlations between the surface precipitates of pulps and selected strength properties of paper sheets. Special attention was paid to the surface lignin and extractives of fibres. The main surface-characterising techniques employed were electron spectroscopy for chemical analysis (ESCA), atomic …

    aalto Repository record for Effect of surface properties of fibres on some paper properties of mechanical and chemical pulp (opens in a new tab)

  7. Multistage fibre length fractionation of softwood chemical pulp using a pressure screen equipped with smooth-holed screen cylinder

    … a new market for the remaining low value pulp for an efficient use of the raw materials. In this study, an NBSK pulp was fractionated on the basis of fibre length using a small industrial pressure screen Beloit MR-8 in multiple consecutive stages to isolate the lowvalue fines fraction from …

    ubc Repository record for Multistage fibre length fractionation of softwood chemical pulp using a pressure screen equipped with smooth-holed screen cylinder (opens in a new tab) Download PDF for Multistage fibre length fractionation of softwood chemical pulp using a pressure screen equipped with smooth-holed screen cylinder (opens in a new tab)

  8. Three Essays on Environmental Economics: Subsidies, Free Riding, and Public Shaming

    … and burned with traditional fuel. The American chemical pulp industry, which has traditionally burned ‘Black Liquor’, a residue of the pulping process, was able to make large claims on this subsidy in 2009 by mixing diesel fuel into a process where it was not required. This scenario exhibits two …

    ottawa-retro Repository record for Three Essays on Environmental Economics: Subsidies, Free Riding, and Public Shaming (opens in a new tab)

  9. Reinforcement ability of mechanical pulp fibres

    … the reasons why the long fibres of mechanical pulp do not seem to reinforce paper as effectively as chemical reinforcement pulp. A preliminary laboratory trial showed that artificially increasing the average fibre length of TMP pulp by adding long fibres extracted from the same pulp increased …

    aalto Repository record for Reinforcement ability of mechanical pulp fibres (opens in a new tab)

  10. A pilot plant study of the anaerobic digestion of semi-chemical mill wastes

    … was to determine if high loadings of semi-chemical pulp mill waste could be processed in a pilot plant by anaerobic digestion.

    vt Repository record for A pilot plant study of the anaerobic digestion of semi-chemical mill wastes (opens in a new tab)

  11. Μελέτη του χρωματισμού χημικής χαρτομάζας με φυτικές βαφές

    … plantmaterials natural colorants were applied on chemical pulp, in order to examine theirdyeability. Especially, the case of chemical pulp dyeing, using plant materials rich inpolyphenolic compounds such as tannins, anthocyanins and other flavonoids, which arenatural colorants, was studied. The …

    greece Repository record for Μελέτη του χρωματισμού χημικής χαρτομάζας με φυτικές βαφές (opens in a new tab)

  12. Behaviour of different furnish mixtures in mechanical printing papers

    … papers consist of a mixture of mechanical pulp – groundwood or TMP – chemical reinforcing pulp and filler. They may also contain recycled fibre. The mixtures of different mechanical or chemical pulps are not used. A mixture of groundwood rich in fines and long-fibred TMP could be assumed to …

    aalto Repository record for Behaviour of different furnish mixtures in mechanical printing papers (opens in a new tab)

  13. Fibre fractionation in hydrocyclones

    … to specific surface. Fractionation of various pulps are described showing evidence of fractionation by length and coarseness. Sheet property measurements, showing that sheets made from hydrocyclone accepts are always stronger than those made from hydrocyclone rejects, are also presented. …

    ubc Repository record for Fibre fractionation in hydrocyclones (opens in a new tab) Download PDF for Fibre fractionation in hydrocyclones (opens in a new tab)

  14. A study of the flow properties of New Zealand wood pulp suspensions

    … of the most important process operations in the pulp and paper industry is the transport of pulp in pipe lines. Because pipe friction losses are much higher than with water under comparable conditions, accurate design correlations for each pulp are important to the industry. The purpose of this …

    auckland-ms Repository record for A study of the flow properties of New Zealand wood pulp suspensions (opens in a new tab)

  15. The economic outlook for the woodpulp industry in British Columbia

    … has taken the position that demand for woodpulp will greatly exceed the supply during the next five years. On the other hand, leaders of British Columbia's pulp and paper industry fear that a large surplus of pulp is inevitable. In this thesis, the difference of opinion was examined by …

    ubc Repository record for The economic outlook for the woodpulp industry in British Columbia (opens in a new tab) Download PDF for The economic outlook for the woodpulp industry in British Columbia (opens in a new tab)

  16. A new manufacturing process for microcrystalline cellulose (MCC)

    … a relatively small number in comparison with chemical pulps, whose production totals around 135,820,000 tonnes. Most of the studies on MCC are focused on the final product itself rather than the production method. This study provides comprehensive scientific examination of the new production …

    aalto Repository record for A new manufacturing process for microcrystalline cellulose (MCC) (opens in a new tab)

  17. State-of-the-art pollution control technology : global market pull or domestic regulatory push?

    … case study of the decisions of New Zealand's two chemical pulp mills, Tasman and New Zealand Forest Products, to simultaneously replace heavily polluting chlorine bleaching with environmentally benign oxygen bleaching was used. Three hypotheses were proposed to explain this action: (i) oxygen …

    lincoln Repository record for State-of-the-art pollution control technology : global market pull or domestic regulatory push? (opens in a new tab)

  18. Isolation and characterization of lignin from populus

    … and in particular lignin chemistry, impacts chemical pulp yield and quality. In this research, a thorough lignin chemical structure was elucidated and related to pulp properties of natural aspen clones and genetically modified hybrid poplar. The chemical differences among phenotypically …

    ubc Repository record for Isolation and characterization of lignin from populus (opens in a new tab) Download PDF for Isolation and characterization of lignin from populus (opens in a new tab)

Page 1 of 2