Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"Chemiresistor"”.

  1. High-performance chemiresistor instrumentation circuit for micro gas chromatograph

    … gold nanoparticles (MPN) chemiresistor (CR) arrays. Two approaches for CR array instrumentation were explored. First, a CMOS instrumentation circuit using DC techniques was designed and tested. The 8-channel DC chip achieves a resolution better than 125ppm over a very wide …

    msu Repository record for High-performance chemiresistor instrumentation circuit for micro gas chromatograph (opens in a new tab)

  2. Development of Chemiresistor Based Nanosensors to Detect Volatile Cancer Biomarkers

    Researchers have shown links between various hydrocarbons and carbonyl compounds and diseases, such as cancer using exhaled breath analysis through gas chromatography/mass spectroscopy (GC/MS) analysis of volatile organic compounds (VOCs). Trained canines can detect these VOCs and can differentiate …

    iupui Repository record for Development of Chemiresistor Based Nanosensors to Detect Volatile Cancer Biomarkers (opens in a new tab)

  3. Design And Fabrication Of Chemiresistor Typemicro/nano Hydrogen Gas Sensors Usinginterdigitated Electrodes

    … energy in recent years. Among them, various chemiresistor based hydrogen sensors have been studied due to their relatively simple structure and well-established detection mechanism. The recent progress in micro/nanotechnology has accelerated the development of small-scale chemical sensors. In …

    ucf Repository record for Design And Fabrication Of Chemiresistor Typemicro/nano Hydrogen Gas Sensors Usinginterdigitated Electrodes (opens in a new tab)

  4. EXPLORING DETECTION LIMITS AND RESPONSE TIME SCALES OF CHEMIRESISTOR GAS SENSORS BASED ON CARBON NANOTUBE AND HYBRID LAYERS

    … of NH3 concentrations in urban areas with chemiresistor gas sensors (CGSs) has been so far widely overlooked, since the average levels are usually low, i.e. in the 20-30 ppb range, while the CGSs are generally tested by exposure to ammonia in the ppm range. Carbon nanotubes (CNTs), …

    milano Repository record for EXPLORING DETECTION LIMITS AND RESPONSE TIME SCALES OF CHEMIRESISTOR GAS SENSORS BASED ON CARBON NANOTUBE AND HYBRID LAYERS (opens in a new tab)

  5. Synthesis, Characterization and Chemical Functionalization of Nitrogen Doped Carbon Nanotubes for the Application in Gas- and Bio-Sensors

    In this work, a chemiresistor-type sensing platform based on aligned arrays of nitrogen-doped multi-walled carbon nanotubes (N-MWCNTs) was developed. Our N-MWCNT based sensors can be made on both rigid and flexible substrates; they are small, have low power consumption and are suitable for highly …

    qucosa-diss

  6. Modeling and Data Analysis of Conductive Polymer Composite Sensors

    … change of the sensor signals. In this work, 64 chemiresistors representing eight different carbon concentrations (8–60 vol.% carbon) were constructed by depositing thin films of a carbon black–polyisobutylene composite onto concentric spiral platinum electrodes on a silicon chip. The responses …

    byu Repository record for Modeling and Data Analysis of Conductive Polymer Composite Sensors (opens in a new tab) Download PDF for Modeling and Data Analysis of Conductive Polymer Composite Sensors (opens in a new tab)

  7. Functional Nanomaterials for Artificial and Bio-hybrid Olfactory Sensors

    … organothiol-functionalized gold nanoisland based chemiresistor. Upon exposure to a specific odor, the chemiresistor ensemble comprised of nine different chemical functionalities produced a unique and discernable odor fingerprint that is reproducible for at least up to 90 days, which was sufficient …

    wustl Repository record for Functional Nanomaterials for Artificial and Bio-hybrid Olfactory Sensors (opens in a new tab)

  8. Investigation of thiol derivatized gold nanoparticle sensors for gas analysis.

    … identifying cancer and other diseases by using a chemiresistor sensor or array with gold nanoparticles to detect biomarkers. Acetone is a biomarker for diabetes and having a portable testing device could help to monitor diabetic and therapeutic progress. An advantage to this testing method is it …

    louisville Repository record for Investigation of thiol derivatized gold nanoparticle sensors for gas analysis. (opens in a new tab)

  9. Synthesis and Applications of Highly Concentrated Silver Nanoparticles with an Ultra-Thin Silica Shell

    … surfaced-enhanced Raman scattering substrate. A chemiresistor is designed that takes advantage of both the ultra-thin silica shell and high concentrations for vapor sensing applications. They are also cast into 2D & 3D polymer matrixes. It is believed that these nanoparticles hold a unique …

    clemson Repository record for Synthesis and Applications of Highly Concentrated Silver Nanoparticles with an Ultra-Thin Silica Shell (opens in a new tab)

  10. Surface-functionalized chemiresistive films that exploit h-bonding, cation-pi, and metal-halide interactions.

    … To date, the use of metal nanoparticle-based chemiresistors for trace VOC detection, particularly gold nanoparticle-based sensors, is of great interest due to their high chemical stability, ease of synthesis, unique optical properties, large surface to volume ratio, and high level of …

    louisville Repository record for Surface-functionalized chemiresistive films that exploit h-bonding, cation-pi, and metal-halide interactions. (opens in a new tab)

  11. Interactive Wireless Sensor for Remote Trace Detection and Recognition of Hazardous Gases

    … that corresponds to a gas leak. It consists of a chemiresistor, such as an array of conductometric sensors, and a mechanism analyzing the data in real time. A smell-print is composed of many molecules which reaches receptor in the human nose. When a specific receptor receives a molecule, it sends …

    wku-diss Repository record for Interactive Wireless Sensor for Remote Trace Detection and Recognition of Hazardous Gases (opens in a new tab)

  12. Cyclodextrin-Derived Polymer Networks for Applications in Selective Molecular Adsorption

    … was explored in BTEX sensing with a composite chemiresistor device. The selectivity observed in BTEX adsorption by β-CD-PNP was maintained in the composite device responses to BTEX vapors. The presence of β-CD-PNP also significantly enhanced the device sensitivity. Overall, this dissertation …

    tamu Repository record for Cyclodextrin-Derived Polymer Networks for Applications in Selective Molecular Adsorption (opens in a new tab)

  13. The development of multisensor arrays utilising conducting polymers.

    … this format the films act as chemical resistors (chemiresistors) the current flow being influenced by the polymers' molecular electronics. Devices of this nature are potentially useful as sensors for analytes which cause the reversible modulation of the films' molecular electronics, leading to a …

    sheffield-hallam Download PDF for The development of multisensor arrays utilising conducting polymers. (opens in a new tab)

  14. Biologically Responsive Soft Circuit Elements: Towards Implantable Bioelectronics

    … have been developed into a dual-responsive, chemiresistor oscillator circuit system. The input of the system is the chemical potential of the analytes acting through the biological activity of immobilized enzymes and the output of the system is a single sinusoidal wave wherein the …

    tamu Repository record for Biologically Responsive Soft Circuit Elements: Towards Implantable Bioelectronics (opens in a new tab)

  15. Electronic nose for analysis of volatile organic compounds in air and exhaled breath.

    … cancer, diabetes and other diseases by using a chemiresistor sensor array to detect biomarkers. The objective of this research project is to develop sensor arrays ― or so-called electronic nose ― for analysis of VOCs in air and exhaled breath. In this dissertation, we have investigated both …

    louisville Repository record for Electronic nose for analysis of volatile organic compounds in air and exhaled breath. (opens in a new tab)

  16. Robust Odorant Recognition in Biological and Artificial Olfaction

    … where the operation of a temperature programmed chemiresistor is treated akin to a mathematical input/output (I/O) transform. Results show that the I/O transform is unique for each analyte-transducer combination, robust with respect to sensor aging, and is highly reproducible across sensors of …

    wustl Repository record for Robust Odorant Recognition in Biological and Artificial Olfaction (opens in a new tab)

  17. TUNABLE GRAPHENE CHEM-FET AND GRAPHENE/SI HETEROJUNCTION CHEMI-DIODE SENSORS

    … mechanism in graphene chemical sensors or chemiresistor is conductance change due to charge exchange between graphene and vi adsorbed molecules. The reported sensitivities have been fairly low and selectivity is difficult to observe without functionalization. This work aims at improving the …

    south-carolina Repository record for TUNABLE GRAPHENE CHEM-FET AND GRAPHENE/SI HETEROJUNCTION CHEMI-DIODE SENSORS (opens in a new tab)

  18. Novel K2W7O22/Ti3C2 Nanocomposite-Based Sensor Device for Breath Acetone Analysis in Diabetic Patients

    Acetone in exhaled breath is gaining attention as a non-invasive means of quantifying blood glucose levels in Diabetics. This calls for development of novel biosensors for the detection of trace concentrations of acetone present in human breath. Traditional gas detection systems, such as GC/MS and …

    ndsu Repository record for Novel K2W7O22/Ti3C2 Nanocomposite-Based Sensor Device for Breath Acetone Analysis in Diabetic Patients (opens in a new tab)

  19. Towards Identifying Disinfectants and Quantifying Disinfectant Levels in Water

    Disinfectants are added to the water distribution system and swimming pools to control the growth of pathogenic microorganisms in water. High disinfectant levels are health hazards since they produce disinfectant by-products which are carcinogens. Thus, monitoring the amount ofresidual …

    mcmaster Repository record for Towards Identifying Disinfectants and Quantifying Disinfectant Levels in Water (opens in a new tab)

  20. Growth and Characterization of Transition Metal Oxides for Chemical Sensor Applications: Setting up Initiated Hot Wire Chemical Vapor Deposition System

    Transitional metal oxides have widespread applications as gas sensors, battery electrodes and so on. In this project, we studied thin films of SnO2 and MoOx deposited on glass substrates with thickness ranging from 140 nm to 200nm using pulsed laser ablation of pure SnO2 and MoO3 targets in oxygen …

    mo-state Repository record for Growth and Characterization of Transition Metal Oxides for Chemical Sensor Applications: Setting up Initiated Hot Wire Chemical Vapor Deposition System (opens in a new tab)

Page 1 of 2