Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Classical Beam Theory"”.
-
Thermal Bending, Buckling and Post-Buckling Analysis of Unsymmetrically Laminated Composite Beams with the Effects of Moisture and Geometric Imperfections
… of unsymmetrically laminated composite beams with imperfection under hygrothermal effects. Three different boundary conditions will be considered on this study. The non-linear governing partial differential equations are derived by taking into account the von-Karman geometrical …
-
Analysis and Optimal Design of Pyramidal Truss Core Panels
… to solid plates. Present design formulas use classical beam theory with engineering assumptions made for moment of inertia and shear modulus determinations. Analysis with the SUPERSAP finite element code indicates that the present theory provides good prediction for the plate stresses but may …
-
Parametric spatial modal analysis of beams
… to use this new data for the analysis of beams. Two approaches are investigated: minimum residual methods and boundary condition methods. The minimum residual approaches include autoregressive methods and non-linear least squares techniques. Significant contributions to sample rate …
-
Investigation of Northeast Extreme Tee (NEXT) D Beam Bridges as an Alternative to Precast Hollow Core Bridges: An Exploration of Appropriate Slab Design Forces
Adjacent precast, prestressed concrete beam bridges have become a popular solution throughout the country because deck forming can be eliminated and construction is rapid. In South Carolina, adjacent beam bridges primarily consist of flat slab or hollow core sections, and they are currently only …
-
A Theoretical Structural Impairment Detection System for Timber Railway Bridges
… model was a quasi-static model developed from classical beam theory and implemented in MATLAB. The second model was a dynamic, finite element model created in LS-DYNA. Traversing axle loads were imposed on the models. The results obtained from the model were the wheel paths the axles take as …
-
Verification and Validation of Euler-Bernoulli Beam Theory Model for Wind Blade Structure Analysis
… response of wind turbine blades using advanced beam theory, the Euler-Bernoulli Beam theory. The objective is to achieve faster computation of blade structural response under aerodynamic loading while maintaining sufficient accuracy. The research involves the development of a Python-based …
-
Verification and Validation of Euler-Bernoulli Beam Theory Model for Wind Blade Structure Analysis
… response of wind turbine blades using advanced beam theory, the Euler-Bernoulli Beam theory. The objective is to achieve faster computation of blade structural response under aerodynamic loading while maintaining sufficient accuracy. The research involves the development of a Python-based …
-
Reliability and interconnections for printed circuits on fabrics
… Pierce's fabric cantilever test with the classical beam theory to predict the NA positions of four screen printed e-textiles based on different blends of polyester /cotton/lycra fabric. Modelling and empirical results show that piezoresistive strain gauges, screen printed as conductors …
-
Finite element beam model for piezoelectric energy harvesting using higher order shear deformation theory
… harvesters are unimorph cantilever composite beams, which have a single active piezoceramic layer and a passive substrate or a bimorph that has a passive substrate sandwiched between two piezoceramic layers. Power is captured across a coupled load resistor circuit in either a series or …
-
A reliability based design procedure for wood pallets
… are based on matrix structural analysis and classical beam theory. The deckboard-stringer joints are modeled as spring elements, the stiffness of which are based upon characteristics of the fastener. Most fasteners commonly used in pallet construction (i.e. threaded nails or staples) can be …
-
Linear Vibrational Characteristics of Auxetic Metastructured Cantilever Beams: Experimental, Numerical, and Predictive Modeling
… vibrational behavior of auxetic metastructured beams remains challenging because their complex unit-cell architecture produces nonuniform stiffness and mass distributions that cannot be described directly using classical beam theory. This thesis presents a numerical and experimental …
-
ACTIVE VIBRATION CONTROL OF PIEZOLAMINATED COMPOSITE BEAM AND PLATE
… and finite element models based on third-order beam theory and classical plate theory are developed to model the dynamic as well as static response of laminated composite beams and plates with integrated piezoelectric sensors and actuators (S/As) and subjected to both mechanical and electrical …
-
Theoretical And Computational Challenges With Rods
… compared to its length. In solid mechanics, the theory of rods can be thought of as a generalized and geometrically exact version of the classical beam theory. There are two major variants of rod theory which are used commonly: Kirchoff rods and Cosserat rods. In Kirchoff rod theory, a rod is …
-
Numerical and analytical study of a spar-like floating offshore wind turbine impacted by a ship
… the modes involving cross-section crushing) and classical beam theory (based on the upper-bound theorem associated with a plastic limit analysis). For the mooring analysis, as the collision time is large in comparison to the mooring vibration modes, and the surge motion of the FOWT is small in …
-
Mechanical response of free-standing elastogranular structures
… two particular canonical structures: columns and beams. Elastogranular columns are constructed using external and internal fibers, with internal fibers included through layer-by-layer addition, and external fibers providing the outer encasing for the columnar structure. Elastogranular beams are …
-
Experimental and Numerical Investigation of the Micromechanical Behavior of Selective Laser Melted Ti-6Al-4V Cellular Lattices for Biomedical Applications
… by devising an analytical model based on classical beam theory and and periodic boundary conditions. Specifically, two spatial arrangements are considered: a honeycomb with regular square cells and a honeycomb with square cells staggered by a prescribed offset of half of the cell wall …