Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Closed-form model"”.

  1. MIMO Channel Spatial Covariance Estimation: Analysis Using a Closed-Form Model

    … therefore promise significant improvement in performance. However, because of the rapid variation in channel state information (CSI) in networks with mobile nodes or scatterers, it is difficult both to maintain high communication performance and to create channel models that effectively represent …

    byu Repository record for MIMO Channel Spatial Covariance Estimation: Analysis Using a Closed-Form Model (opens in a new tab) Download PDF for MIMO Channel Spatial Covariance Estimation: Analysis Using a Closed-Form Model (opens in a new tab)

  2. Parametric modeling and analysis of structural bonded joints

    A closed form model of a double lap bonded joint based on the Hart-Smith Model is considered. An extensional link is added to the inner adherend in order to minimize the magnitude of the shear distribution in the adhesive along the overlap length and equations are formulated for this new model. …

    wvu Repository record for Parametric modeling and analysis of structural bonded joints (opens in a new tab)

  3. Modeling performance of horizontal, undulating, and multilateral wells

    … may not be valid in some reservoirs, well performance should be verified before making decisions. Undulation is usually associated to horizontal wells with some degrees. Existing inflow performance models do not account for the undulation of the well, which can cause significant error and …

    tamu Repository record for Modeling performance of horizontal, undulating, and multilateral wells (opens in a new tab)

  4. Power Supply Induced Jitter Including the Ground Bounce and Transmission Media Effects

    … PSIJ and one bit simulation of the large-signal model. Also, an alternative and systematic approach is proposed based on MNA formulation and Thomas Algorithm. Also, a novel closed-form model for transmission line type interconnects is developed relating the input and the output nodes of the …

    carleton Repository record for Power Supply Induced Jitter Including the Ground Bounce and Transmission Media Effects (opens in a new tab)

  5. Cross directional response modeling, identification and control of dry weight profile on paper machines

    In this thesis, dry weight response modelling, identification and control of the cross directional (CD) profile of a paper sheet is investigated. To date, the available modelling strategies are either very detailed and require computational fluid dynamics techniques or are based on purely …

    ubc Repository record for Cross directional response modeling, identification and control of dry weight profile on paper machines (opens in a new tab) Download PDF for Cross directional response modeling, identification and control of dry weight profile on paper machines (opens in a new tab)

  6. ACT-R Based Models For Learning Interactive Layouts

    … learning of interactive layouts. I develop two models based on a theory of cognition known as ACT-R (Adaptive Control of Thought–Rational). I validate them against experimental data collected by other researchers. The first model is a simulation model that emulates the transition from novice to …

    york Repository record for ACT-R Based Models For Learning Interactive Layouts (opens in a new tab)

  7. Using locally observed swarm behaviors to infer global features of harsh environments

    … of the swarm distribution to the potential models to accurately identify the environment being explored. This technique affirms that there is a correlation between the individual robot behaviors, robot distribution, and the environment being explored. For more complex behaviors and …

    colostate Repository record for Using locally observed swarm behaviors to infer global features of harsh environments (opens in a new tab)

  8. A system identification technique for predicting transient operation of gas turbine engines

    A method for developing transient, predictive models of gas turbine engine performance using system identification techniques in conjunction with test cell data has been successfully demonstrated. Test cell data were obtained for both transient and steady-state operation from two F402-RR-406A USMC …

    vt Repository record for A system identification technique for predicting transient operation of gas turbine engines (opens in a new tab)

  9. Statistical and perceptual properties of images and videos with applications

    … is the basis of several univariate statistical models. Such models were the fundamental building blocks of multiple visual applications, ranging from the design of faithful image and video quality models to the development of perceptually optimized image enhancing techniques. Towards advancing …

    texas Repository record for Statistical and perceptual properties of images and videos with applications (opens in a new tab)

  10. Model Guided Memory Optimization For Key-Value Caches

    … in this thesis, we introduce and apply cache modeling techniques to optimize the memory organization of a key-value cache to improve overall cache performance. Specifically, we begin with a single-level key-value cache and use miss ratio curves to adjust the memory assigned to the residing …

    mtu Repository record for Model Guided Memory Optimization For Key-Value Caches (opens in a new tab)

  11. Virtualized Welding Based Learning of Human Welder Behaviors for Intelligent Robotic Welding

    … welding robots are developed by process modeling / control method and learning the human welder behavior. Weld penetration and 3D weld pool surface are first accurately controlled for an automated Gas Tungsten Arc Welding (GTAW) machine. Closed-form model predictive control (MPC) …

    uky-thes Repository record for Virtualized Welding Based Learning of Human Welder Behaviors for Intelligent Robotic Welding (opens in a new tab)

  12. Evaluating the Interfacial Mechanics of Distributed Strain Sensors Mounted to GFRP Reinforcing Bars

    … To fill this gap, this study examined the performance of DFOS in capturing tensile strain in GFRP bars under cyclic and sustained loading. Experimental testing and numerical analysis were conducted to identify key influencing factors and define limits for efficient and stable monitoring. …

    ottawa-retro Repository record for Evaluating the Interfacial Mechanics of Distributed Strain Sensors Mounted to GFRP Reinforcing Bars (opens in a new tab)

  13. Thermal designs, models and optimization for three-dimensional integrated circuits

    … are heavily studied to enable improved performance with denser packaging and reduced interconnects. Despite numerous advantages, thermal management is the biggest bottleneck to expanding the applications of this device stacking technology. In addition to implementing the thermal-aware …

    uiuc Repository record for Thermal designs, models and optimization for three-dimensional integrated circuits (opens in a new tab)

  14. RF MEMS for RF and microwave wireless communication systems

    … systems. As we are facing an explosion of information data transmission, that is estimated to grow exponentially in the next few years, multiband and ultrawideband systems are the realistic solutions to follow. As a result, reconfigurable systems are of significant importance and are …

    unsw Repository record for RF MEMS for RF and microwave wireless communication systems (opens in a new tab)

  15. The impact of interconnect process variations and size effects for gigascale integration

    … effective resistivity and ultimately chip performance. The investigation is accomplished through five tasks. In Task I, a new closed-form effective resistivity model, which is a function of line-edge roughness (LER), surface specularity and grain boundary reflectivity, is derived. In Task II, …

    gatech Repository record for The impact of interconnect process variations and size effects for gigascale integration (opens in a new tab)

  16. Uncertainty Analysis and Control of Multiscale Process Systems

    … significant discrepancy between the expected performance and the actual yield that can be accomplished employing existing methodologies. This gap is mainly related to the complexities associated with the multiscale nature of the thin film deposition process, lack of practical online in-situ …

    waterloo Repository record for Uncertainty Analysis and Control of Multiscale Process Systems (opens in a new tab)

  17. Impact of elevated temperatures on soil tensile strength

    … earthen structures and slopes. While several models for the prediction of tensile strength of unsaturated soils have been proposed in the literature, critical gaps remain regarding proposing a comprehensive model describing the tensile behavior of all soil types over a wide range of suction. …

    oklahoma-thes Repository record for Impact of elevated temperatures on soil tensile strength (opens in a new tab) Restricted access