Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"Cnc turning"”.

  1. In-process tool condition monitoring systems in CNC turning operations

    <p>The present study shows the development of in-process tool condition monitoring systems utilizing signal decomposition technique, statistical data analysis, and artificial neural networks system. Two systems; (1) the system based on the multiple regression, (2) the system based on artificial …

    iastate Repository record for In-process tool condition monitoring systems in CNC turning operations (opens in a new tab)

  2. Development of a Surface Roughness Prediction & Optimization Framework for CNC Turning

    Computer numerical control (CNC) machining is an integral element to the manufacturing industry for production of components with requirements to meet several outcome conditions. The surface roughness (Ra) of a workpiece is one of the most important outcomes in finish machining processes due to …

    mcmaster Repository record for Development of a Surface Roughness Prediction & Optimization Framework for CNC Turning (opens in a new tab)

  3. A study of machining parameters to optimize surface finish in metal cutting through CNC

    … been performed at shop floor of NJIT, on MAZAK(CNC turning center), using two different cutting tool materials(high speed steel and cemented carbide) and a workpiece of Aluminium. The results have been then evaluated and analyzed to see the effects of various combinations of cutting conditions, …

    njit Repository record for A study of machining parameters to optimize surface finish in metal cutting through CNC (opens in a new tab)

  4. Coolant fluid in a turning operation: Soybean coolant fluid in different concentrations versus petroleum coolant fluid

    … prove the point a number of tests were performed turning 4140 steel on a CNC turning center. A number of tests were conducted to provide a comparative study of dry, petroleum based cutting fluid and soybean based cutting fluid at different concentrations. It has been found that the soy based …

    northern-iowa Repository record for Coolant fluid in a turning operation: Soybean coolant fluid in different concentrations versus petroleum coolant fluid (opens in a new tab)

  5. The Progressive Regeneration of a Traditional Production Plant

    … the Company was analysed and the selection of a CNC turning centre was undertaken. This machine was purchased, commissioned and brought into full production.<br/><br/>The problem of reducing expensive mould wear was investigated but no methods superior to those now used were identified. …

    southwales Repository record for The Progressive Regeneration of a Traditional Production Plant (opens in a new tab) Download PDF for The Progressive Regeneration of a Traditional Production Plant (opens in a new tab)

  6. Precision turning of shafts with piezoelectric actuator tool

    … production sequence because the conventional turning machine cannot meet the tolerances. This thesis investigates the use of a piezoelectric fast tool servo designed for precision turning of shafts on a conventional turning machine. In doing so, the grinding operation, the final process of …

    ubc Repository record for Precision turning of shafts with piezoelectric actuator tool (opens in a new tab) Download PDF for Precision turning of shafts with piezoelectric actuator tool (opens in a new tab)

  7. Process Optimization in Machining: An Applied Research Approach

    … collaboratively with an industrial partner for a CNC turning process. The process was semi-automated, and used 100% inspection of parts. Part measurement data was recorded by the software, allowing for SPC to be applied to identify common-cause sources of variation. The software was then able to …

    mcmaster Repository record for Process Optimization in Machining: An Applied Research Approach (opens in a new tab)

  8. Piezoelectric tool actuator for precision turning

    … tool/actuator designed for the precision turning of cylindrical shafts. The piezo tool actuator has four fundamental components. The piezo stack element delivers a dynamic displacement range of 40 μm when 0 to -1000V voltage is applied. The piezo element is placed in a mechanical housing …

    ubc Repository record for Piezoelectric tool actuator for precision turning (opens in a new tab) Download PDF for Piezoelectric tool actuator for precision turning (opens in a new tab)

  9. In-process pokayoke development in multiple automatic manufacturing processes

    … roughness adaptive control (ISRAC) system for CNC end milling operations. A multiple linear regression algorithm was successfully employed to generate the models for predicting surface roughness and adaptive feed rate change in real time. Not only were the machining parameters included in the …

    iastate Repository record for In-process pokayoke development in multiple automatic manufacturing processes (opens in a new tab)

  10. Modelling and optimization of machining processes towards economic and environmental sustainability

    … apply the proposed models and are focused on the turning of two titanium-based alloys conventionally used for aerospace applications: a Ti-6Al-4V alloy and a Ti-48Al-2Cr-2Nb intermetallic alloy. A Graziano SAG 101 CNC turning lathe was used in the experiments in order to obtain inventory data to …

    poli-torino Repository record for Modelling and optimization of machining processes towards economic and environmental sustainability (opens in a new tab)

  11. Automatická výměna obrobků pro soustružnická obráběcí centra malé velikosti se svislou i vodorovnou osou vřetena

    … systému automatickej výmeny obrobku pre CNC sústružnícke centrá malej veľkosti s horizontálnou a vertikálnou osou vretena. Po literárnej rešerši existujúcich riešení nasleduje systémový rozbor a návrh troch variantov systému, z ktorých bol jeden variant zvolený na základe hodnotenia a …

    brno-tech Repository record for Automatická výměna obrobků pro soustružnická obráběcí centra malé velikosti se svislou i vodorovnou osou vřetena (opens in a new tab)

  12. Navržení povlakovaných nástrojů pro technologii soustružení součásti "příruba"

    … nástrojů při výrobě součásti „příruba“ na CNC soustruhu. V první části je uvedena podstata povlakování nástrojů a přehled nabízených povlakovaných nástrojů pro soustružení od známých světových výrobců. Dále je řešeno posouzení technologičnosti vyráběné součásti, návrh polotovaru, sestavení …

    brno-tech Repository record for Navržení povlakovaných nástrojů pro technologii soustružení součásti "příruba" (opens in a new tab)

  13. CNC soustružení tvarových součástí z korozivzdorné oceli.

    Diplomová práce je zaměřena na CNC soustružení tvarových součástí z korozivzdorných ocelí. První část diplomové práce je zaměřena na teoretický rozbor materiálových vlastností korozivzdorných ocelí. Druhá část je zaměřena na návrh experimentu tvarově složitých experimentálních součástí z …

    brno-tech Repository record for CNC soustružení tvarových součástí z korozivzdorné oceli. (opens in a new tab)

  14. Konstrukce malého CNC soustruhu

    Cílem této diplomové práce je konstrukce malého CNC soustruhu ideálního převážně pro malé série menších obroků či pro učební potřeby. V první části práce je provedena obecná rešerše obsahující technologii soustružení, nástroje pro soustružení a rozdělení soustružnických strojů. Dále je zde rešerše …

    brno-tech Repository record for Konstrukce malého CNC soustruhu (opens in a new tab)

  15. Technologie výroby zadané rotační součásti

    Tato diplomová práce se zabývá návrhem a úpravou technologie výroby rotačního kusu, kde dochází k problému s nástroji kvůli vlastnostem materiálu. Práce se zabývá navržením efektivnějšího technologického postupu, výběrem problémových nástrojů, a finanční zhodnocení.

    brno-tech Repository record for Technologie výroby zadané rotační součásti (opens in a new tab)

  16. Návrh technologie součásti "výztuha" ve firmě Stamit Slavkov u Uh. Brodu.

    … varianty, která umožňuje efektivní využití CNC soustruhu Tornado T6MS s protivřetenem. Nová technologie využívá variabilní a časově úsporný systém upínání Coromant Capto.

    brno-tech Repository record for Návrh technologie součásti "výztuha" ve firmě Stamit Slavkov u Uh. Brodu. (opens in a new tab)

  17. Konstrukce držáku dynamometru pro soustružnické centrum

    … dynamometru pro soustružnické centrum SP 280 SY CNC. Byla vybrána nejvhodnější koncepce na základě prostorového řešení a kolizí se strojem. Byla rozřešena konstrukce jednotlivých dílů vybrané koncepce držáku. Nutné výpočty a simulace pro bezpečný provoz držáku byly též provedeny. Na základě 3D …

    brno-tech Repository record for Konstrukce držáku dynamometru pro soustružnické centrum (opens in a new tab)

  18. Process Optimization Towards The Development Of An Automated Cnc Monitoring System For A Simultaneous Turning And Boring Operation

    … to identify machine settings of an Okuma LC 40 Turning Center and optimize the cost of machining in terms of tool cost and energy consumption while maintaining part quality at a productive cycle time. Studying the relationship between energy consumption, tool life, and cycle time with the speed …

    ucf Repository record for Process Optimization Towards The Development Of An Automated Cnc Monitoring System For A Simultaneous Turning And Boring Operation (opens in a new tab)

Page 1 of 2