Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Co-Sintering"”.
-
Co-sintering of a metal injection overmolded bi-metallic part
A metal injected component was produced by overmolding technique. To reach a good result differebnt powder matching were studied. The final mechanical properties and corrosion resistance of the interface microstructure were investigated.
-
High Temperature Co-Sintering for Metal Supported-Solid Oxide Fuel Cell Fabrication
… also cheaper than all-ceramic cells since the conventional support material (one of the active components) is almost entirely replaced by a cheaper metal. Several MS-SOFC fabrication methods have been reported in the literature, including thermal spray deposition on pre-fabricated porous metal …
-
A phenomenological approach to the prediction of material behaviours during co-sintering
This work deals with the sintering of multi-material composites. It aims at the establishment of an alternative to the existing complex models for sintering. The development of the associated experimental procedure is also included in this work. The developed material model must be able to predict …
-
Multi-oxide direct ink writing and co-sintering for binary ceramic nuclear fuel applications
… as it can produce highly dense (> 90%) components. However, co-sintering multi-material ceramic parts is a large challenge as different sintering behavior between the two materials leads to internal stress build up resulting in part cracking. This dissertation begins to quantify the …
-
DEVELOPMENT OF INNOVATIVE SOFCS BY COLLOIDAL PROCESSES AND CO-SINTERING TO BE USED BY BIOFUELS
… are a type of renewable energy system that can convert biofuels into power and heat whenever needed. They often operate at high temperatures (> 850 °C), which allows for fuel flexibility; nevertheless, such high temperatures are associated by rapid material deterioration and performance loss, …
-
Materials Development for the Fabrication of Metal-Supported Solid Oxide Fuel Cells by Co-sintering
Solid Oxide Fuel Cell (SOFC) is an upcoming technology seen with great expectations for the production of electrical energy with good efficiency and minimal environmental impact. Successful commercialization of SOFCs has however been hindered despite the optimistic promises made by some developers. …
-
Development of Porous Metal-supported Solid Oxide Fuel Cells
… of this study was to develop a process of co-firing the ceramic layers of a solid oxide fuel cell attached to their porous metal support. This is a major departure from the traditional fuel cell architecture where the support layer is a ceramic composite made of YSZ and NiO.</p> <p>The …
-
Engineered Alumina / Silicon Carbide Laminated Composites
… and strength to metals, especially in severe conditions. However, the extensive use of such ceramics in structural engineering applications often encountered critical problems due to their lack of damage tolerance and to the limited mechanical reliability. Several ceramic composites and, in …
-
Critical evaluation of additively manufactured electrical ceramics for dielectric resonator applications
Dielectric resonators (DRs) are ceramic components used primarily in wireless communication devices for their high relative permittivities and low loss properties, with much room for improvement aimed at maximizing their electrical properties. Additive manufacturing (AM) of ceramic materials opens …
-
A study on Fe-induced structural, magnetic and transport properties in colossal magnetoresistive Nd0.67Sr0.33MnO3 polycrystalline bulk and films
… storage density increases. This explains why a considerable effort is now focused on the study of manganese oxides that exhibits colossal magnetoresistance (CMR) effect as large as possible at room temperature. Other application of magnetoresistance can be in the field of electric current …
-
Material Exploration and Solution Strategies for High Performance All-Solid-State Batteries
… a lithium metal anode and high voltage cathode coupled with a solid electrolyte (SE). As a result, these batteries can provide high energy density, improved safety and lower costs compared to conventional Li-ion batteries. While promising, this technology suffers from several lingering …
-
The manufacture and testing of anode supported Ni-10Sc1CeSZ SOFCs for intermediate temperature operation
… based on a Ce-doped Scandia-stabilised Zirconia (ScSZ) structure manufactured via screen-printing is outlined. In this thesis we report on the successful manufacture of anode supported 8YSZ baseline cells and cells containing Ni-10Sc1CeSZ anodes supporting 10Sc1CeSZ electrolytes both …
-
Production of Micro-Tubular Solid Oxide Fuel Cells
An innovative current collection architecture for micro-tubular solid oxide fuel cells (SOFC) has been developed. A nickel wire is coiled around a thin carbon composite rod in order to fabricate cell supports. Different carbon composites such as pencil leads and carbon fibres were investigated. The …
-
Spark Plasma Sintering of Titanium and Cobalt Alloys For Biomedical Applications
… the frame of an industrial research project in cooperation with the Eurocoating SpA and K4Sint Srl, aiming at developing the commercial pure titanium, the Ti-6Al-4V and the Co-28Cr-6Mo alloys by Spark Plasma Sintering (SPS) for biomedical application. The definition of the process parameters for …
-
The influence of alumina supported cobalt catalysts on synthetic fuel production
… (Norton type SA 6176 and Puralox SBA 200) cobalt-based Fischer Tropsch catalysts were synthesized via an impregnation method. Initially, catalyst preparation involved (aqueous) impregnation conducted at pH 2 using 3 M nitric acid with cobalt promoted with either lanthanum and/or ruthenium …
-
The Role of Bi/Material Interface in Integrity of Layered Metal/Ceramic
… given to the role that bi-material interfaces, co-sintering effects and residual stresses play in the resulting mechanical response. The first main goal was to investigate the effects of the manufacturing process (i.e. layer by layer deposition) on the mechanical response; to enable this …
-
Developing carbon tolerant Ni/ScCeSZ cells via aqueous tape casting for direct biogas fed solid oxide fuel cells (SOFC)
… high electrical efficiency and theoretically compatible to operate with gaseous carbonaceous fuel. The problem arises when the benchmark materials (Ni/YSZ) performance drop with operation with carbon fuels. Hence, this thesis aims to develop SOFC cell with alternative materials that have high …
-
Synthesis of ceria-based anode-supported solid oxide fuel half-cells by piezoelectric inkjet printing and tape casting
… fuel cells (SOFCs) are electrochemical energy conversion devices that generate bulk electricity and heat by converting the chemical energy of the fuel directly into electrical energy without combustion. The product of the electrochemical reaction is pure water vapour which makes the conversion …
-
Electrochemical Development of Cathode for Metal Supported-Solid Oxide Fuel Cells
In comparison to conventional generation systems, the use of Solid Oxide Fuel Cells (SOFCs) provides higher electrical efficiency and lower carbon emissions. Furthermore, contrary to other fuel cell types, SOFC is considered fuel flexible as it can use a variety of fuels, such as hydrogen, alcohol, …
-
Cold Sintering of Functional Ceramics and Glasses
… have had been used for millennia and have become ubiquitous in applications including communication, electronic and biomedical devices. Traditionally, ceramics are sintered at very high temperatures approaching ~80% of melting temperature. The high temperatures required to produce dense …
Page 1 of 2