Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 78 for “"CoCr"”.

  1. Metallurgical Characterization of New Palladium-Containing CoCr and NiCr Alloys

    … added to traditional base metal alloys such as CoCr and NiCr. Objectives: The purpose of this study was to evaluate the microstructure and Vickers hardness of two new CoPdCr and one new NiPdCr alloy and compare them to traditional CoCr and NiCr alloys. Methods: The casting alloys investigated …

    marquette Repository record for Metallurgical Characterization of New Palladium-Containing CoCr and NiCr Alloys (opens in a new tab)

  2. Charakterizace žárově stříkaného kovokeramického WC-CoCr povlaku na hořčíkové slitině AZ91

    … bakalářské práce je hodnocení kovokeramického WC-CoCr povlaku na hořčíkové slitině AZ91 z hlediska mikrostruktury, chemického a fázového složení a mechanických vlastností. Depozice byla provedena metodou HVOF (High Velocity Oxy-Fuel). Teoretická část je věnována hořčíkovým slitinám se zaměřením na …

    brno-tech Repository record for Charakterizace žárově stříkaného kovokeramického WC-CoCr povlaku na hořčíkové slitině AZ91 (opens in a new tab)

  3. Porovnání nástrojů pro frézování dentálních náhrad z materiálů Ti6Al4V ELI a CoCr

    Cílem této práce je porovnání dvou vybraných fréz. Obě frézy jsou ze slinutých karbidů, proto teoretickou část věnujeme těmto materiálům. Porovnáváme chemické složení i mechanické a fyzikálních vlastnosti jednotlivých materiálů fréz. Další kapitola se zabývá geometrií fréz s půlkruhovými čelními …

    brno-tech Repository record for Porovnání nástrojů pro frézování dentálních náhrad z materiálů Ti6Al4V ELI a CoCr (opens in a new tab)

  4. Impact of Solidification on Tensile Strength of CoCr 2LC in Selective Laser Melting

    … the selective laser technique is applied to a CoCrMo alloy. Due to its high corrosion resistance, wear-resistance, and heat resistance, this alloy is mainly used for medical or high temperature applications.</p> <p>A systematic approach is used to investigate the influence of the process …

    ut-knoxville Repository record for Impact of Solidification on Tensile Strength of CoCr 2LC in Selective Laser Melting (opens in a new tab)

  5. Cobalt induced cardiotoxicity : a suspected adverse effect associated with COCR alloy orthopaedic implants

    Cobalt toxicity, arising from the release of metal nanoparticles and ions during wear of Co/Cr metal-on-metal (MoM) hip implants has become a recognised internal source of Co poisoning. Co ions enter the bloodstream during wear and corrosion processes of MoM implants, and then travel throughout the …

    strathclyde Repository record for Cobalt induced cardiotoxicity : a suspected adverse effect associated with COCR alloy orthopaedic implants (opens in a new tab)

  6. Magnetic properties of sputtered CoCr films and magneto-optics of rare earth-transition metal multilayers

    … recording and magneto-optic recording. CoCr and rare earth-transition metal multilayers are the most suitable media for perpendicular recording and magneto-optic recording technologies, respectively. In part A of the thesis, magnetic properties of CoCr thin films produced by dc magnetron …

    ubc Repository record for Magnetic properties of sputtered CoCr films and magneto-optics of rare earth-transition metal multilayers (opens in a new tab) Download PDF for Magnetic properties of sputtered CoCr films and magneto-optics of rare earth-transition metal multilayers (opens in a new tab)

  7. Investigations of the Physical and Magnetic Microstructure of CoCr Thin Film Perpendicular Magnetic Recording Media

    … the physical and magnetic microstructure in CoCr thin film perpendicular magnetic recording media. This was investigated using a combination of transmission electron microscope (TEM) techniques to study a series of CoCr films with systematically adjusted growth conditions. The first chapter …

    glasgow Download PDF for Investigations of the Physical and Magnetic Microstructure of CoCr Thin Film Perpendicular Magnetic Recording Media (opens in a new tab)

  8. Effect of Alloying with Palladium on the Corrosion Behavior of CoCr and NiCr Dental Alloys

    … added to traditional base metal alloys such as CoCr and NiCr, thereby raising their classification to that of a noble alloy. Little is known about this class of casting alloy, however, particularly its biocompatibility and corrosion properties. The objective of this study was to evaluate the …

    marquette Repository record for Effect of Alloying with Palladium on the Corrosion Behavior of CoCr and NiCr Dental Alloys (opens in a new tab)

  9. Evaluation of Shear Bond Strength of Denture Base Materials to Polymer and CoCr RDP Frameworks

    … proposed to replace traditional cobalt chromium (CoCr) frameworks. However, their properties must be tested to ensure that they are comparable to traditional framework. The ability to bond to veneering resins, is important in the repair of a removable dental prosthesis. CoCr enveloped by …

    buffalo Repository record for Evaluation of Shear Bond Strength of Denture Base Materials to Polymer and CoCr RDP Frameworks (opens in a new tab)

  10. The Effect of Particle Surface Area to Volume Ratio on Ion Release from CoCr Spheres

    In 2005, over 200,000 Americans underwent a hip arthroplasty, the replacement of a hip joint with an artificial prosthesis. Of these arthroplasties, metal-on-metal type implants represent an increasing usage percentage. Metal-on-metal implants are selected largely for their low volumetric wear …

    calpoly Repository record for The Effect of Particle Surface Area to Volume Ratio on Ion Release from CoCr Spheres (opens in a new tab)

  11. An Evaluation of Retention of PEEK versus CoCr RPD Frameworks When Utilizing Zirconia Survey Crowns: In-Vitro Study

    … polyetheretherketone (PEEK) and cobalt chromium (CoCr) as a removable partial denture framework material when zirconia (ZrO2) is used as the survey crown material. Hypothesis: The hypothesis was that PEEK and CoCr RPD frameworks with zirconia survey crowns (ZrC) provide a similar retention as CoCr …

    buffalo Repository record for An Evaluation of Retention of PEEK versus CoCr RPD Frameworks When Utilizing Zirconia Survey Crowns: In-Vitro Study (opens in a new tab)

  12. Investigação do comportamento tribológico do revestimento WC-CoCr/HVOF aplicado a componentes hidráulicos sob princípios da Green Tribology

    … deste estudo foi avaliar o potencial da liga WC-CoCr, como opção aos revestimentos de cromo duro e testar o desempenho das superfícies revestidas, em condições a seco e lubrificadas, após o processo de refusão a laser. Caracterizou-se os revestimentos, quanto a microdureza, microestrutura, …

    brazil-ufrgs Repository record for Investigação do comportamento tribológico do revestimento WC-CoCr/HVOF aplicado a componentes hidráulicos sob princípios da Green Tribology (opens in a new tab)

  13. Pine oil mixed with hydroxyapatite for coating on CoCr alloy under heat treatment as a biomaterial for bone replacement application

    CoCr-Legierungen wurden und werden für orthopädische Implantate verwendet, da sie eine Kombination aus hoher Festigkeit, Korrosionsbeständigkeit und Biokompatibilität ermöglichen. Seit 1985 wurden metallische Implantate umfassend untersucht, die mit Calciumphosphaten beschichtet sind, um die …

    qucosa-diss

  14. Mechanical Characterization of PAEK in Terms of Shear Bonding, Flexural Strength, and Hardness With and Without Thermocycling

    … from base metal alloys such as cobalt-chromium CoCr. When used as a framework, this material has some disadvantages, such as its poor aesthetics and the strain on the abutment. However, the new material, Polyaryletherketone (Ultaire AKP, Solvay Dental 360), recently came to the dental field. …

    buffalo Repository record for Mechanical Characterization of PAEK in Terms of Shear Bonding, Flexural Strength, and Hardness With and Without Thermocycling (opens in a new tab)

  15. Plasma als alternative Reinigungsmethode von NEM-Legierungen vor adhäsiver Befestigung

    … zur Konditionierung und Reinigung von CoCr-Restaurationen vor dessen Verklebung. Ziel war es, zu untersuchen, ob die in der Studie verwendeten Reinigungsmethoden eine mögliche Alternative zum Korundstrahlen kontaminierter CoCr-Oberflächen sowie eine Erleichterung für das klinische …

    cau-kiel Repository record for Plasma als alternative Reinigungsmethode von NEM-Legierungen vor adhäsiver Befestigung (opens in a new tab)

  16. Investigation Into Perpendicular Anisotropy Cobalt-chromium Films With Application To Winchester Computer Discs

    RF-sputtered CoCr films have been characterized for a variety of deposition conditions, and the most effective parameters which bring about perpendicular anisotropy have been evaluated. In particular bias sputtering has been noted for its role in improving the crystallographic orientation and …

    plymouth Repository record for Investigation Into Perpendicular Anisotropy Cobalt-chromium Films With Application To Winchester Computer Discs (opens in a new tab)

  17. Isolation of Wear Debris from Periarticular Tissue and In Vivo Biocompatibility of Silicon Nitride Particles

    … nitride (SiN), or 0.025 mm3 of cobalt chromium (CoCr) or titanium particles to the isolation procedure. Particles were filtered and analysed using scanning electron microscopy (SEM), elemental analysis and image analysis software before and after isolation. The method had no significant effect on …

    whiterose Download PDF for Isolation of Wear Debris from Periarticular Tissue and In Vivo Biocompatibility of Silicon Nitride Particles (opens in a new tab)

  18. Application of image based finite element analysis for mechanical characterization of materials processed by direct energy deposition technology

    … materials. To this end, a cobalt chromium (CoCr) metal alloy sample and a tungsten carbide-17% cobalt (WC-17Co) cermet specimen were both fabricated by the direct energy deposition (DED) process and were examined in this study. A comparative study between the results obtained from the …

    ndsu Repository record for Application of image based finite element analysis for mechanical characterization of materials processed by direct energy deposition technology (opens in a new tab)

Page 1 of 4