Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 288 for “"Coating Thickness"”.

  1. Estimating hull coating thickness distributions using the EM Algorithm

    The underwater hull coating system on surface ships is comprised anti-corrosive (AC) and anti-fouling (AF) paint The AF layers are designed to wear away, continuously leaching cuprous oxide to inhibit marine growth. The thickness of the AF paint layers determines the expected service life of a …

    nps Repository record for Estimating hull coating thickness distributions using the EM Algorithm (opens in a new tab)

  2. Imaging Profilometry For In Situ Measurement of Plasma Spray Coating Thickness

    Thermal Barrier Coatings (TBCs), and plasma spray coatings in general, require critical control over the deposited thickness to achieve reliable coating performance. Currently, the plasma spray industry quantifies thickness by sampling the part before and after TBC deposition. Approximate thickness …

    arizona-thes Repository record for Imaging Profilometry For In Situ Measurement of Plasma Spray Coating Thickness (opens in a new tab)

  3. Coating Thickness Measurements and Defect Characterization in Non-Metallic Composite Materials by Using Thermography

    … fiber composite, anti-reflection (AR) film, and coatings. As other NDT methods do, thermography determines a defective area based on the signal difference between suspected defective areas and defective-free areas. Two unavoidable effects are decreasing the credibility of thermography detection: …

    tamu Repository record for Coating Thickness Measurements and Defect Characterization in Non-Metallic Composite Materials by Using Thermography (opens in a new tab)

  4. Thickness Prediction of Deposited Thermal Barrier Coatings using Ray Tracing and Heat Transfer Methods

    Thermal barrier coatings (TBCs) have been extensively employed as thermal protection in hot sections of gas turbines in aerospace and power generation applications. However, the fabrication of TBCs still needs to improve for better coating quality, such as achieving coating thickness' uniformity. …

    iupui Repository record for Thickness Prediction of Deposited Thermal Barrier Coatings using Ray Tracing and Heat Transfer Methods (opens in a new tab)

  5. Fiber coatings and the fracture behavior of a woven continuous fiber fabric-reinforced ceramic composite

    … composites with various fiber/matrix interface coating thicknesses have been successfully fabricated by novel forced chemical vapor infiltration (FCVI) methods. The influence of the interface coating thickness on the fracture behavior of continuous fiber-reinforced SiC composites has been …

    ut-knoxville Repository record for Fiber coatings and the fracture behavior of a woven continuous fiber fabric-reinforced ceramic composite (opens in a new tab)

  6. Simulation of Plasma Electrolytic Oxidation (PEO) of AM50 Mg Alloys and its Experimental Validation

    … From comparison, the simulation result of coating thickness is in good agreement with the experimental result. The application of the model was verified by studies investigating the influences of different voltage, a complex substrate geometry and the electrode distance on the formation of …

    cau-kiel Repository record for Simulation of Plasma Electrolytic Oxidation (PEO) of AM50 Mg Alloys and its Experimental Validation (opens in a new tab)

  7. Optimisation of the HVOF thermal spray process for coating, forming and repair of components

    … effectiveness in producing superior quality of coating. The demand of high-technology industries and the availability of new advanced materials have generated major advances in this field. The HVOF thermal spray process has been utilised in many industries to apply coatings on components to …

    dcu Download PDF for Optimisation of the HVOF thermal spray process for coating, forming and repair of components (opens in a new tab)

  8. A Study of Sintered Copper Porous Surfaces for Pool Boiling Enhancement

    … aforementioned parameters through copper porous coatings. In this work, copper substrates were coated with 3M copper powders using a drop coating and screen printing technique. Substrate bonding was achieved by sintering at elevated temperatures. The coated substrates were characterized using …

    rit Repository record for A Study of Sintered Copper Porous Surfaces for Pool Boiling Enhancement (opens in a new tab)

  9. Synthesis and indentation of boride and carbide coated carbon nanotube composite microstructures

    … and mechanical behavior of novel refractory coatings for applications subjected to extreme conditions. Starting from aligned carbon nanotube (CNT) forests as scaffolds, composite foams are fabricated by infiltration with refractory materials to achieve desirable mechanical properties such as …

    uiuc Repository record for Synthesis and indentation of boride and carbide coated carbon nanotube composite microstructures (opens in a new tab)

  10. Processing-microstructure-property relationships for cold spray powder deposition of Al-Cu alloys

    … to the deposition of aluminum-copper alloy coatings. Cold spray deposition is a process utilized to create corrosion protection coatings and to perform additive repair for aluminum structures. This thesis utilized a series of Al-Cu binary alloy powders, from 2–5 weight percent copper and …

    nps Repository record for Processing-microstructure-property relationships for cold spray powder deposition of Al-Cu alloys (opens in a new tab)

  11. Generation and Characterization of Nanoaerosols Using a Portable Scanning Mobility Particle Sizer and Electron Microscopy

    … was used for the comparisons. The sputter coating thickness, a conductive coating necessary for SEM, was measured on different sizes of polystyrene latex spheres (PSLS). Aluminum oxide powder was aerosolized using an ADAGE and several different support membranes and sound frequency …

    usf Repository record for Generation and Characterization of Nanoaerosols Using a Portable Scanning Mobility Particle Sizer and Electron Microscopy (opens in a new tab)

  12. Effect of relative humidity on fatigue of anodized 2024-T351 aluminum in completely reversed torsion

    … by other investigators. The aluminum oxide coating was grown on the metal substrate to two thicknesses (0.05 and 0.3 mils). One lot of specimens was polished to determine the effect of this type of surface finish. In all, a total of 108 specimens were run at various combinations of stress, …

    vt Repository record for Effect of relative humidity on fatigue of anodized 2024-T351 aluminum in completely reversed torsion (opens in a new tab)

  13. DEFORMATION OF COMPLIANT COATINGS DUE TO LUBRICATION FORCES

    … In particular, rigid materials with soft coatings (stratified materials) are ubiquitous in tribology, biology, or rheology, and elastic deformation of stratified materials due to lubrication forces can prevent contact formation between approaching surface and can alter the interpretation …

    jhu Repository record for DEFORMATION OF COMPLIANT COATINGS DUE TO LUBRICATION FORCES (opens in a new tab)

  14. An experimental study of dropwise condensation on horizontal condenser tubes

    Three types of drop promoting coatings were applied to the outside of 15.9 mm (5/8 in) outside-diameter condenser tubes to determine their effect on heat transfer performance. The coatings included a new fluoroepoxy, a commercial series of fluorocarbon coatings, and sputtered TFE. Coating thickness …

    nps Repository record for An experimental study of dropwise condensation on horizontal condenser tubes (opens in a new tab)

  15. Laser induced emission spectrometry for rapid elemental analysis.

    … are reported in detail for the first time. Coatings of zinc/nickel, tin, titanium nitride and chromium are examined. Depth profile signatures and crater shape are greatly influenced by operating conditions. Improved depth resolution and signatures are obtained using high laser energy and …

    sheffield-hallam Download PDF for Laser induced emission spectrometry for rapid elemental analysis. (opens in a new tab)

  16. Fabrication and Characterisation of Regular and Complex Shapes Alumina from Aluminium Foil by PEO Process

    … growth behaviour and properties of PEO coatings were investigated. Optical emission spectroscopy was used to investigate the composition of plasma discharge and evolution of its main components during the PEO process. The plasma electron temperature was calculated using two independent …

    whiterose Download PDF for Fabrication and Characterisation of Regular and Complex Shapes Alumina from Aluminium Foil by PEO Process (opens in a new tab)

  17. Evaluation of electroless nickel-phosphorus (EN) coatings

    … of Electroless Nickel-Phosphorus (EN) coatings has witnessed a staggering increase during the last two decades. Many outstanding characteristics of the EN coating method have generated a lot of interest in various industries including oil and gas, electronic, chemical, automotive, …

    sask Repository record for Evaluation of electroless nickel-phosphorus (EN) coatings (opens in a new tab)

  18. Toward Polymer Coating with Easy Ice Release

    … wires, while a growing interest concerns coatings for aerospace applications. The work described here describes progress for coatings and ice release test method development over the last few years. Major achievements include: (1) New Rigid Adherent-Resistant Elastomers (RARE), (2) A new …

    vcu Repository record for Toward Polymer Coating with Easy Ice Release (opens in a new tab)

  19. Coated dental floss as a novel instrument for drug delivery to the Gingival Mucosa: Development, characterization, and In vivo delivery

    … coated using a custom designed and fabricated coating system containing a coating solution reservoir and specialized floss-holder. Then floss was coated with drug in either free form or after encapsulation in poly(lactic-co-glycolic) acid nanoparticles (NPs). Initial study of drug coating …

    ttu Repository record for Coated dental floss as a novel instrument for drug delivery to the Gingival Mucosa: Development, characterization, and In vivo delivery (opens in a new tab)

Page 1 of 15