Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"Coating degradation"”.
-
Flow Accelerated Organic Coating Degradation
Applying organic coatings is a common and the most cost effective way to protect metallic objects and structures from corrosion. Water entry into coating-metal interface is usually the main cause for the deterioration of organic coatings, which leads to coating delamination and underfilm corrosion. …
-
Monitoring of antimicrobial coatings and biofilm formation on in vitro model of medical implant surfaces
… formation including development of biodegradable coatings loaded with antibiotics which enable controlled release of antibiotics to inhibit biofilm formation. This study evaluates the feasibility of utilizing Electrical Spectroscopy (ES) to non-invasively monitor medical implant-like surfaces …
-
Device Design for In-Situ EIS Measurements of Organic Coatings Under Accelerated Degradation Via Impingement Flow
… a holistic approach to the study of corrosion degradation mechanism of organic coatings using impingement flows. A state-of-the-art impingement flow testing device was developed for the experimental investigations of coating degradation behavior under various fluid flow conditions. The testing …
-
Real-Time Corrosion Monitoring and AI-Driven EIS Spectra Prediction for Aluminium Beverage Cans
Coatings applied to the interior surfaces of aluminum beverage can-lids play a critical role in preventing corrosion and maintaining the integrity of the product throughout its shelf life. However, these coatings are susceptible to long-term degradation due to mechanical stresses during fabrication …
-
Jonapluoščio dulkinimo metodu suformuotų plonasluoksnių skaidrinančių dangų sugerties charakteristikų ir jų įtakos optinių komponentų savybėms tyrimas /
… samples. For Ta2O5/SiO2 antireflective coating negligible correlation between absorption and LIDT was found. Two antireflective coatings consisting of different high refractive index materials were formed in order to investigate correlation between absorption and LIDT in the ultraviolet …
-
Impedance-Based Wireless Sensor Network for Metal-Protective Coating Evaluation
… bare metals, but there is little emphasis on the degradation of metal-protective coating. Evaluating the metal-protective coating usually uses the Electrochemical Impedance Spectroscopy (EIS) method. This paper presents a new impedance-based wireless sensor network for metal-protective coating …
-
Predictive Analysis of Corrosion Resistance in Automotive Coatings Using Artificial Neural Networks
… integrates advanced methodologies to analyze the degradation and long-term performance of various coating systems. Employing Electrochemical Impedance Spectroscopy (EIS) and Artificial Neural Networks (ANN), we monitored barrier coatings over an extended period of 1000 days to form a baseline …
-
Predictive Analysis of Corrosion Resistance in Automotive Coatings Using Artificial Neural Networks
… integrates advanced methodologies to analyze the degradation and long-term performance of various coating systems. Employing Electrochemical Impedance Spectroscopy (EIS) and Artificial Neural Networks (ANN), we monitored barrier coatings over an extended period of 1000 days to form a baseline …
-
Predictive Analysis of Corrosion Resistance in Automotive Coatings Using Artificial Neural Networks
… integrates advanced methodologies to analyze the degradation and long-term performance of various coating systems. Employing Electrochemical Impedance Spectroscopy (EIS) and Artificial Neural Networks (ANN), we monitored barrier coatings over an extended period of 1000 days to form a baseline …
-
Predictive Analysis of Corrosion Resistance in Automotive Coatings Using Artificial Neural Networks
… integrates advanced methodologies to analyze the degradation and long-term performance of various coating systems. Employing Electrochemical Impedance Spectroscopy (EIS) and Artificial Neural Networks (ANN), we monitored barrier coatings over an extended period of 1000 days to form a baseline …
-
Corrosion studies on alpha tantalum and beta tantalum coated steel
Tantalum coating by sputtering, one form of physical vapor deposition (PVD), has been investigated as a replacement for chromium coatings on gun bores to protect them from erosion and corrosion due to its high ductility and high corrosion resistance in aggressive environments. When deposited as a …
-
Suspension Plasma Spray Thermal Barrier Coating Systems - Modelling and Performance Characterization Under Isothermal and Cyclic Oxidation Conditions
… behavior of a vertically cracked thermal barrier coating (TBC) deposited by suspension plasma spraying (SPS) technique was studied in this research under isothermal and cyclic conditions. A peak temperature 1080ºC and the durations of 400, 800, and 1300 hours/ cycles were utilized. Two different …
-
Investigating the effect of CMAS Infiltration on Residual Stress of High Temperature Ceramic Coatings for Turbine Engines using 3D Confocal Raman Spectroscopy
… turbine blades. This infiltration increases coating stiffness and promotes coating phase destabilization, encouraging micro-crack formation and increasing the risk of spallation. Thermomechanical effects from CMAS infiltration were mapped over time with confocal Raman spectroscopy. The …
-
Solid particle erosion of CVD diamond coatings
<p>Diamond coatings deposited on both tungsten and tungsten carbide-cobalt substrates were investigated. The thickness of the coatings ranged from 10 to 200mm and the samples were supplied in both as-grown and lapped forms. The coatings were characterised using a number of techniques including …
-
The effect of bond coat oxidation on the microstructure and endurance of two thermal barrier coating systems
… tests were carried out on two thermal barrier coating systems consisting of a CMSX-4 nickel-based superalloy substrate, NiCoCrAlY overlay bond coat applied by two different techniques and a yttria stabilised zirconia topcoat applied by electron beam physical vapour deposition (EBPVD). The bond …
-
Numerical simulation of a load-based microindentation technique for nde on thermal barrier coating systems
The durability and life-cycle of thermal barrier coatings (TBC) applied to gas turbine blades and combustor components limits the maximum temperature and subsequent efficiency at which gas turbine engines operate. The development of new materials, coating technologies and evaluation techniques is …
-
Exploring conductive domain wall phenomena in ferroelectrics with nitrogen-vacancy magnetometry
… current injection and detection, while tip wear, coating degradation and environmental effects contribute to poor reproducibility. As a result, reported carrier densities and mobilities often span several orders of magnitude across the literature.<br/><br/>This thesis investigates nitrogen-vacancy …
-
Pipeline Corrosion and Coating Failure under Alternating Current Interference
… of AC on the properties and performance of epoxy coatings was studied in a simulated soil solution and a conceptual model was developed to illustrate the mechanistic aspect of AC induced coating degradation. The applied CP can be shielded by coating disbondment through monitoring the local …
-
Design Of Multiphase Rare Earth Aluminate Zirconate Thermal Barrier Coating Materials For Enhanced Reactivity With Molten Silicates.
… on ceramic thermal and environmental barrier coatings (T/EBCs) for insulation and corrosion protection. The ability of these coatings to mitigate premature failure caused by calcium-magnesium-aluminosilicate (CMAS) based corrosive deposits is critical to ensure the desired component lifetimes. …
-
The Effect of Topical Fluoride Agents on Coated Nickel-Titanium Archwires
… of coated wires were tested: one with a polymer coating and one with a rhodium ion coating. Wires were divided into treatment groups based on type of fluoride exposure: no treatment (DI water), neutral sodium fluoride gel, neutral sodium fluoride rinse, or acidulated phosphate fluoride (APF) gel. …
Page 1 of 2