Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 129 for “"Coating processes"”.

  1. Development of PVD coating processes informed by plasma diagnostics.

    … The ever increasing complexity of the required coating microstructure and chemical composition can be achieved only by the development of PVD technology and in particular plasma sources for vapour generation that can provide the necessary tools.This thesis describes plasma diagnostic studies of …

    sheffield-hallam Download PDF for Development of PVD coating processes informed by plasma diagnostics. (opens in a new tab)

  2. Flow and Drying Dynamics in Gravity- and Capillary-Driven Coating Processes

    Liquid-applied coatings are ubiquitous. Buildings, bridges, soda cans, compact discs, and newspapers make up a small fraction of everyday objects whose surfaces are enhanced by coatings. Typical processing steps for a liquid-applied coating include coating formulation, application, post-deposition …

    umn Repository record for Flow and Drying Dynamics in Gravity- and Capillary-Driven Coating Processes (opens in a new tab)

  3. Transfer and Filling of Non-Newtonian Liquids in Printing and Coating Processes

    … inks in liquid-based printing and coating applications, much remains to be explored regarding their influence on the flow dynamics. In this thesis we study several model problems to advance our understanding of how non-Newtonian behavior affects (i) transfer of liquid between two …

    umn Repository record for Transfer and Filling of Non-Newtonian Liquids in Printing and Coating Processes (opens in a new tab)

  4. The Development of Hybrid Process Control Systems For Fluidized Bed Pellet Coating Processes

    … basic control for pharmaceutical batch processes has several drawbacks. The basic control often uses constant process settings discovered by trial and error. The rigid process operation provides limited process understanding and forgoes the opportunities of process optimization. Product …

    duquesne Repository record for The Development of Hybrid Process Control Systems For Fluidized Bed Pellet Coating Processes (opens in a new tab)

  5. Particle-based approach to model fuel droplet impact and thermal spray coating processes

    … fuel spray dynamics and thermal spray coating. The first part is about the consecutive drop-wall interactions at different impingement frequencies at a wide range of wall temperatures and ambient pressure conditions. The second part is centered around the solidification of a molten …

    iastate Repository record for Particle-based approach to model fuel droplet impact and thermal spray coating processes (opens in a new tab)

  6. Numerical investigations of thermal spray coating processes: combustion, supersonic flow, droplet injection, and substrate impingement phenomena

    … characteristics of high speed thermal spray coating processes in order facilitate technological development. Supersonic flow phenomena, combustion, discrete droplet and particle migration with heating, phase change and disintegration, and particle impingement phenomena at the substrate are …

    soton Download PDF for Numerical investigations of thermal spray coating processes: combustion, supersonic flow, droplet injection, and substrate impingement phenomena (opens in a new tab)

  7. Studies of laser-based, solid freeform fabrication and coating processes using nanoscale and functionally-graded materials

    … processing and performance of freeform parts and coatings. Both laser experiments and thermal transport models were utilized to achieve the end goal with applications targeted to dies, molds and light-weight aluminum structures. Specifically a computer-numerical-controlled, high-power CO2 laser …

    iastate Repository record for Studies of laser-based, solid freeform fabrication and coating processes using nanoscale and functionally-graded materials (opens in a new tab)

  8. An Investigation of Liquid Coating via the Contact Spreading Mechanism in Tumbling Drum and Fluidised Bed Coating Processes

    The spray coating of particles is used in many industrial applications. One of the mechanisms involves the transfer of liquid between particles via liquid bridge formation and rupture; known as contact spreading. To date, there has been limited research into this mechanism. Indeed, the few studies …

    whiterose Download PDF for An Investigation of Liquid Coating via the Contact Spreading Mechanism in Tumbling Drum and Fluidised Bed Coating Processes (opens in a new tab)

  9. Finishing Processes for Zein Biodegradable Films

    Lamination and coating processes of zein-oleic acid films provided films with range of tensile properties, gas barrier properties, and thermal properties. The range could make zein-based films potentially useful in packaging applications for fresh produce of different respiration rates.

    uiuc Repository record for Finishing Processes for Zein Biodegradable Films (opens in a new tab)

  10. Nanocomposite of ZrO2/Polymer Thin-Film Coatings by the Ionically Self-Assembled Monolayer Technique

    … structures of zirconia/polymer thin-film coatings have been fabricated on quartz and single-crystal silicon substrates by the Ionically Self-Assembled Monolayer (ISAM) technique. Particle size distribution was measured to calculate the grain diameter of the zirconia particles. UV/Vis …

    vt Repository record for Nanocomposite of ZrO2/Polymer Thin-Film Coatings by the Ionically Self-Assembled Monolayer Technique (opens in a new tab)

  11. Interfacial Interactions Between Carbon Nanoparticles and Conjugated Polymers

    … from solution by traditional printing and coating processes in a roll-to-roll format such as papers and graphic films. This shows great promise for the emerging energy generation and conversion. The device performance of polymer electronics is largely dependent of crystalline structures and …

    calpoly Repository record for Interfacial Interactions Between Carbon Nanoparticles and Conjugated Polymers (opens in a new tab)

  12. Impact of Particle Morphology on the Rheology of PCC-Based Coatings

    … of precipitated calcium carbonate (PCC) based coatings was studied. Evaluating the interactions between different particle sizes and shapes leads to a better understanding of the packing fraction of PCC. HIgh packing fraction is desirable because of the positive impact on the fluidity of …

    gatech Repository record for Impact of Particle Morphology on the Rheology of PCC-Based Coatings (opens in a new tab)

  13. Globally Optimal Robust Control for Large-Scale Sheet and Film Processes

    Sheet and film processes such as polymer film extruders, paper machines, and coating processes are large scale and high speed. Addressing model uncertainty for these processes is critically important because model uncertainty can cause the closed loop system to perform poorly. Here an approach is …

    uiuc Repository record for Globally Optimal Robust Control for Large-Scale Sheet and Film Processes (opens in a new tab)

  14. Consolidation of surface coatings by friction stir techniques

    … plasma sprayed with a Titanium-Nickel-Chrome coating or a Titanium coating. Single and multiple pass experiments were performed with both a pinned and a pinless FSP tool at rotation speeds of 400, 800 and 1500 revolutions per minute; all traverses were done at four inches per minute. Optical …

    nps Repository record for Consolidation of surface coatings by friction stir techniques (opens in a new tab)

  15. EXPERIMENTAL AND MODELING STUDIES OF COLLOIDAL SUSPENSION STABILITY OF HIGH-DENSITY PARTICLES IN AQUEOUS SOLUTIONS

    … include the manufacturing of paints and coatings, enhanced oil recovery, waste-water treatment, pharmaceutical dispersions, biotechnology, and inkjet printing. The most common problem in colloidal science is how to stabilize suspended colloidal particles against agglomeration by …

    purdue-thes Repository record for EXPERIMENTAL AND MODELING STUDIES OF COLLOIDAL SUSPENSION STABILITY OF HIGH-DENSITY PARTICLES IN AQUEOUS SOLUTIONS (opens in a new tab)

  16. Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces

    … flavouring particles onto snack surfaces during coating processes is a major concern in the snack production industry. Detachment of flavouring powders from products during handling and production stages can lead to poor appearance and reduced taste of the product as well as substantial financial …

    greenwich Download PDF for Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces (opens in a new tab)

  17. Simulation and design of planarizing materials and interfacial adhesion studies for step and flash imprint lithography

    … planarizing topcoat over topography through spincoating. Photopolymerizable nonvolatile fluids are ideal topcoat materials because they planarize better than volatile fluids during spincoating and can continue to level after spincoating. Fluid mechanics analyses indicate that complete …

    texas Repository record for Simulation and design of planarizing materials and interfacial adhesion studies for step and flash imprint lithography (opens in a new tab)

  18. A novel nonelectrolytic process for chromium and nickel coating

    The use of hexavalent chromium in metal coating operations, as per electrolytic processing, is subject to increasingly restrictive regulations due to its carcinogenic and toxic properties. Yet, these coatings are critical for corrosion resistance in aircraft parts such as hydraulic systems. This …

    nps Repository record for A novel nonelectrolytic process for chromium and nickel coating (opens in a new tab)

  19. Estudo da deposição de hidroxiapatita por PEO em amostras de TI CP2 e aço inoxidável AISI 316LVM

    … body, engineering focuses on studies on ceramic coating processes, surface modifications and the search for new materials. Much research has been done on the coating of metal surfaces with hydroxyapatite, due to its special characteristics to human bone, through the technique of oxidative …

    brazil-ufrn Repository record for Estudo da deposição de hidroxiapatita por PEO em amostras de TI CP2 e aço inoxidável AISI 316LVM (opens in a new tab)

Page 1 of 7