Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Coatings--Testing"”.

  1. Free-space characterization of conductor-backed absorbing materials using an aperture screen

    … thereby decreasing the effectiveness of the coatings. Because of this, it is important to accurately assess the health of the coatings by interrogating them with an electromagnetic wave and analyzing the interaction of the wave with the coating materials. Ideally, the permeability and …

    msu Repository record for Free-space characterization of conductor-backed absorbing materials using an aperture screen (opens in a new tab)

  2. Accelerated viscoelastic characterization of T300/5208 graphite- epoxy laminates

    … accommodated at the design stage. Accelerated testing is therefore required to allow long-term compliance predictions for composite laminates of arbitrary layup, based solely upon short-term tests. In this study, an accelerated viscoelastic characterization scheme is applied to T300/5208 …

    vt Repository record for Accelerated viscoelastic characterization of T300/5208 graphite- epoxy laminates (opens in a new tab)

  3. The effect of molecular weight on the behavior of polystyrene coated steel disks under fretting conditions

    Thin polymeric coatings have been applied to metal surfaces to prevent and/or prolong the onset of fretting corrosion, but the properties that make a polymeric coating effective and the means by which a coating fails are unknown. The purpose of this study was to determine the effect of molecular …

    vt Repository record for The effect of molecular weight on the behavior of polystyrene coated steel disks under fretting conditions (opens in a new tab)

  4. A study of chlorinated polymer coatings in a fretting interface

    The purpose of this study is to determine whether chlorinated polymers such as polyvinylchloride (PVC) and polyvinylidenechloride (PVDC) degrade in a fretting interface. Polymer coated 52100 steel balls are fretted against a polished 1045 steel plate for 30 minutes in air and nitrogen at 25-30 …

    vt Repository record for A study of chlorinated polymer coatings in a fretting interface (opens in a new tab)

  5. Check reduction in red oak (Quercus spp.) lumber using diffusion resistant coatings

    … simulation to model drying behavior, testing a number of coatings to determine moisture loss resistance and evaluation of a coating using full-sized lumber tests. The results indicate a coating can be a viable method of reducing surface checking under severe drying conditions.

    vt Repository record for Check reduction in red oak (Quercus spp.) lumber using diffusion resistant coatings (opens in a new tab)

  6. Predictive tool wear of coated tool systems

    Thesis (M.S.)--Michigan State University. Department of Materials Sciences and Mechanics, 1998

    msu Repository record for Predictive tool wear of coated tool systems (opens in a new tab)

  7. The use of thin polymeric coatings to prevent fretting corrosion and metallic contact in steel-on-steel systems

    … to investigate the ability of thin polymeric coatings to prevent metallic contact and fretting corrosion in steel-on-steel systems. Ten polymer types were chosen for study: polymethylmethacrylate (PMMA), polytetrafluoroethylene (PTFE), polyimide (PI), polyvinylidene fluoride (PVDF), …

    vt Repository record for The use of thin polymeric coatings to prevent fretting corrosion and metallic contact in steel-on-steel systems (opens in a new tab)

  8. Ion vapor deposition

    This thesis describes the development of an ion plating system capable of applying thin films to both insulators and conductors. The two major components, evaporation and sputtering, are described in detail. A brief discussion of relevant characteristics of plasmas is included in this background …

    ttu Repository record for Ion vapor deposition (opens in a new tab)

  9. The Application of Electrochemical Impedance Spectroscopy to Immediately Diagnose the Protective Quality of Coatings on Artistic and Architectural Metalwork

    … buildings, airplanes and sculptures. Protective coatings such as wax, paint, or polymeric clear coatings are used to prolong the lifetime of metals such as steel and bronze. Unfortunately, these coatings fail over time due to oxidative damage by UV rays and by failure to exclude water that can …

    portland-state Repository record for The Application of Electrochemical Impedance Spectroscopy to Immediately Diagnose the Protective Quality of Coatings on Artistic and Architectural Metalwork (opens in a new tab)

  10. Device Design for In-Situ EIS Measurements of Organic Coatings Under Accelerated Degradation Via Impingement Flow

    … of corrosion degradation mechanism of organic coatings using impingement flows. A state-of-the-art impingement flow testing device was developed for the experimental investigations of coating degradation behavior under various fluid flow conditions. The testing device employed Electrochemical …

    ndsu Repository record for Device Design for In-Situ EIS Measurements of Organic Coatings Under Accelerated Degradation Via Impingement Flow (opens in a new tab)

  11. The effects of load, frequency, slip amplitude, humidity and film thickness of polyvinyl chloride on fretting corrosion

    The purpose of this study was to investigate the effects and interactions of lead, frequency, amplitude of slip, humidity, and film thickness of polyvinyl chloride on fretting corrosion. In particular, this study describes the effects of these parameters on the polymer film life and also on the …

    vt Repository record for The effects of load, frequency, slip amplitude, humidity and film thickness of polyvinyl chloride on fretting corrosion (opens in a new tab)

  12. Testování řezivosti nástrojů ze slinutých karbidů povlakovaných PVD nanokrystalickými kompozity

    Diplomová práce se zabývá problematikou rozboru vlastností tvrdých a otěruvzdorných povlaků nanesených PVD technologií. Je zaměřena především na přípravu, provedení a vyhodnocení testovaných povlaků na čelních kulových frézách.

    brno-tech Repository record for Testování řezivosti nástrojů ze slinutých karbidů povlakovaných PVD nanokrystalickými kompozity (opens in a new tab)

  13. Ανθεκτικότητα οργανικών επικαλύψεων που περιέχουν αναστολείς διάβρωσης

    … thesis is the study of the resistance of organic coatings containing volatile corrosion inhibitors and their anticorrosive performance when applied to steel surfaces.The potential absorption ability of a volatile corrosion inhibitor (VpCI) on a chemically clean steel surface was initially …

    greece Repository record for Ανθεκτικότητα οργανικών επικαλύψεων που περιέχουν αναστολείς διάβρωσης (opens in a new tab)