Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 92 for “"Cobalt Ferrite"”.
-
Magneto-Optical Study of Cobalt Ferrite Nanoparticles
… CoxFe1-xFe2O4 nanoparticles is presented, with cobalt molar ratio 0.x.1. The ferrite nanoparticles were produced using a generic wet-chemical synthesis procedure. Stoichiometric amounts of Fe2+, Fe3+ and Co2+ salts are dissolved in a non-aqueous polar medium (diethylene glycol). A …
-
Synthesis and characterization of cobalt ferrite powdered materials
… magnetic properties, especially coercivity of cobalt ferrite (CoFe2O4) powdered materials. The experimental results revealed the strong dependence of magnetic properties on the average particle size and size distribution as well as cation distribution of the resultant powders. Ni2+ substitution …
-
Magnetic properties of cobalt ferrite powders and thin films
Co-ferrite powders were prepared by mechanical-milling. It has been found out that magnetic properties of Co-ferrite powders are strongly dependent on preparation conditions, such as composition, annealing temperature and cooling rate. Magnetic annealing was found to enhance the magnetic remanence …
-
Deposition, microstructure and magnetic anisotropy of cobalt ferrite thin films
Co-ferrite films have showed potential applications in magnetic recording, hard permanent magnet and spintronics devices, which require excellent texture, large perpendicular anisotropy (Ku) and high coercivity (Hc). This work mainly focused on fabricating Co-ferrite films using pulsed laser …
-
Cobalt ferrite prepared employing powder technology, the potential applications, the preparation and characterisation
… when an external magnetic field is applied. Cobalt ferrite, being a ferromagnetic material, has been proposed as a suitable magnetostrictive material for some applications in the area of sensors and actuators. In such applications, speed of response with accurate displacements is important. …
-
Magneto-Electric Nanoparticles Cobalt Ferrite (CoFe2O4) -- Barium Titanate (BaTiO3) for Non-Invasive Neural Modulations
Non-invasive brain stimulation is valuable for studying neural circuits and treating various neurological disorders in human. However, current technologies of noninvasive brain stimulation usually have low spatial and temporal precision and poor brain penetration, which greatly limit their …
-
Fabrication of Multifunctional Carbon Coated Cobalt Ferrite Core/Shell Nanostructures by Pulsed Laser Ablation
… in this project, we synthesized carbon-coated cobalt ferrite (CFO) core-shell nanoparticles (CSNPS) by ablating a solution of toluene and CFO NPs with varying number of pulsed laser shots. The structure of the CSNPs then investigated through X-ray diffraction (XRD), Raman spectroscopy, and also …
-
Thermodynamic evaluation of cobalt-ferrite based redox reactions for solar thermochemical conversion of CO2 into fuels
… carriers. This study investigates the use of cobalt ferrite (CoFe₂O₄) as a redox-active metal oxide for two step solar thermochemical CO₂ splitting to produce carbon monoxide, a key component of syngas. Analysis showed that increasing εgg from 0.0 to 0.95, consistently strengthened heat …
-
Surface segregation in strontium doped lanthanum cobalt ferrite: effect of composition, strain and atmospheric carbon dioxide
… in the SOFCs. Strontium doped lanthanum cobalt ferrite (LSCF) is a widely used cathode material due to its high electronic and ionic conductivity, and reasonable oxygen surface exchange coefficient. However, LSCF can have long-term stability issues such as surface segregation of Sr during …
-
Investigation of magnetic and magnetoelastic properties of novel materials involving cobalt ferrite and terbium silicon germanium systems
<p>The effects of pure shear stress on magnetization in nickel have been studied with a view to developing a theoretical understanding of the Matteucci effect, which is of great technological interest in the search for viable magnetic torque sensors. The effects of pure shear stress on a planar …
-
Development of magnetic stress detection methods involving a cobalt ferrite composite stress sensing material and a magnetic imaging system
… sensing material based off of a metal bonded cobalt ferrite composite. An improvement upon this cobalt ferrite composite has been made by lowering the Curie temperature by substituting other materials into the cobalt ferrite. This will decrease the magnetomechanical hysteresis present at room …
-
Development of novel, rare earth doped lanthanum strontium cobalt ferrite ceramics, synthesized by ion-exchange promoted sol-gel processing
Lanthanum strontium cobaltite ferrite, La0.6Sr0.4Co0.2Fe0.8O3-δ or LSCF6428 is a mixed ionic and electronic conductivity (MIEC) cathode material suitable for use in solid oxide fuel cells (SOFCs) operating at intermediate temperatures (ITs) between 600 - 800 oC. In this work, LSCF6428 and rare …
-
Tailored synthesis of ultra-small nanoparticles for biomedical applications
… functionalisation of ultra-small iron oxide and cobalt ferrite NPs for application as T<sub>1</sub> MRI contrast agents. The main findings of this thesis concern the investigation of 2.4 nm cobalt ferrite NPs for T<sub>1</sub> MRI. Cobalt ferrite NPs may be excellent candidates for …
-
Characterization of Temperature Changes at the Gas-Electrode Interface of Lanthanum Strontium Cobalt Ferrite - Gadolinium doped Ceria based Cathodes for Solid Oxide Fuel Cells used in Mobile Applications
… gas-electrode interface of lanthanum strontium cobalt ferrite – gadolinium doped ceria (LSCF-GDC), a candidate material for the cathode of a solid oxide fuel cell. The observations from experiments indicated that the changes in temperature caused by changing the load and the flow rate were …
-
Grūdų dydžio poveikis nesukepintuose 0-3 erdvinio pasiskirstymo BaTiO3-CoFe2O4 kompozituose /
… the relationship between the sintering time of cobalt ferrite grains and the grain size, and the relationship between the sintering time and the Maxwell relaxation time and activation energy, and to determine how the magnetoelectric coefficient depends on the grain sizes. An electron microscope …
-
Desidrogenação oxidativa do etilbenzeno a estireno na presença de CO2 usando catalisadores a base de CoFe2O4-MCM-41: adsorção preferencial nos sítios O-2-Fe3+ -O2- localizados nas posições octaédricas
… study describes the catalytic performance of cobalt ferrite supported on MCM-41 for the oxidative dehydrogenation of ethylbenzene and evaluates the role of CO 2 on the surface of the catalyst during the reaction using experimental data and density functional theory (DFT) calculations. A …
-
Colloidal CoFe2O4-based nanoparticles for Magnetic Fluid Hyperthermia
… on the topic of magnetic hyperthermia.2 Despite cobalt toxicity, cobalt-containing materials and especially cobalt ferrite nanoparticles have been proposed as promising heat mediators due to its high anisotropy.3–13 In this thesis, the results obtained on two different systems, designed with the …
-
Synthesis, characterization and antimicrobial properties of metallic and semiconductor nanoparticles /
The main focus of this dissertation is on the cobalt ferrite nanoparticles (NPs), their size, core and composition-dependent influence on antimicrobial efficiency. In this study, the CoFe2O4 NPs were synthesized by hydrothermal, co-precipitation, thermal decomposition and electrochemical methods. …
-
Magnetic and magnetoelastic properties of M-substituted cobalt ferrites (M=Mn, Cr, Ga, Ge)
… properties of a series of M-substituted cobalt ferrites, CoMxFe2-xO4 (M=Mn, Cr, Ga; x=0.0 to 0.8) and Ge-substituted cobalt ferrites Co1+xGexFe 2-2xO4 (x=0.0 to 0.6) have been investigated. The Curie temperature TC and hysteresis properties were found to vary with substitution content x, …
Page 1 of 5