Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 116 for “"Coercive field"”.
-
Fabrication and Properties of Bi1/2Na1/2TiO3 Based Ferroelectric Ceramics with Low Levels of B-site Additives
… evaluated. There were improvements in the low-field room temperature dielectric constant of 30% with 25% BNMN, 13% with 10% BNZ, and 16% with 2% BNCW. Higher concentrations of the additives degraded the dielectric performance. The conductivity of the BNT ceramics was reduced with very small …
-
Μαγνητικά νανοσωματίδια φερρίτη για υψηλής ευαισθησίας σκιαγραφικά μέσα αντίθεσης μαγνητικού συντονισμού και βελτιωμένη θεραπεία μαγνητικής υπερθερμίας
… and isolated ones, respectively, while the coercive field values range from 7639 Oe to 13503 Oe, respectively. As for the soft iron phase, two different experimental protocols were used: a) the co-precipitation method and b) the solvothermal method. Their morphology is spherical, with an …
-
Σύνθεση και μελέτη δομικών και μαγνητικών ιδιοτήτων νέων διαμεταλλικών ενώσεων σπάνιας γαίας - μεταβατικών μετάλλων για εφαρμογές μόνιμων μαγνητών σε υψηλές θερμοκρασίες
… with boron, which are characterized by very high coercive field at room and higher temperatures without the need of a long heat treatment. New compounds have been produced mainly as melt spun nanostructured ribbons, by using the melt-spinning technique, and as bulks, by using the arc-melting …
-
Micromagnetismo e transporte eletrônico em materiais magnéticos nanocristalinos
… concentration, was close to 30 nm. However, the coercive field displayed a fairly complex behaviour with change in Fe percentage, indicating variations in the magnetic interactions between the Fe particles. It was observed, by means of Henkel and ôM plots, that the predominant interaction between …
-
Thermostatted models for hysteresis in magnetic nanoparticles
… with the application of a changing magnetic field, and the changes in the loops with temperature and field frequency are discussed. It is found that the coercive field of both models is in reasonable agreement with the coercive field of a cobalt nanoparticle in a recent experiment by …
-
Advancement of Ferroelectric Al1−xScxN thin films
… n-GaN reduced hysteresis asymmetry, leakage, and coercive field values, despite some loss of texture. Further improvements on epitaxial films were achieved by reducing the electrode thickness from 100 nm to 10 nm. Apart from that, ferroelectricity was also demonstrated in ultra-thin (~5 nm) …
-
Electromechanical Strain Mechanisms and Magnetoelectric Coupling in Polycrystalline Bismuth Ferrite
… X-ray and neutron diffraction. Firstly, the field-dependent nonlinearity of macroscopic strains under sub-coercive field cycling was studied using in situ X-ray diffraction, coupled with measurements of the macroscopic strain. This was followed by studying the Maxwell-Wagner frequency …
-
Magnetoelectric Effect in Ferroelectric-Ferromagnetic Heterostructures
… efficiency, which promises high magnetic field sensitivity. In contrast, electric field-controlled magnetization in magnetoelectric thin films is more attractive for information recording and novel electrically-tunable microwave magnetic devices. For the present work, we prepared a series …
-
Síntese, caracterização de ferritas espinélio com propriedades magnéticas e absorvedoras de microondas
… homogeneity and the value of 2.96 x 10-2 tesla coercive field were crucial for high performance ferrite absorber with 0.1 cobalt. The Cobalt has high magnetocrystalline anisotropy, it is associated with an increased coercive field, Hc. Therefore, this property improves the results of …
-
Bulk ceramic bismuth ferrite substituted with rare earths: Synthesis and characterisation
… (160-200 kV/cm) and were cycled above their coercive field, achieving maximum peak-to-peak strains of approximately 0.2-0.3% and remnant polarisations of 20-50 µC/cm2. However, no enhancement of the piezoelectric properties was observed at the MPB. This was attributed to energy dissipation …
-
Magnesia inclusions in lead zirconate titanate
… and phase transition pressure and/or field. In our case we engineer a 92 % dense ceramic of the formulation Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 (PNZT 2/95/5) using micro-crystalline cellulose. However, inducing porosity can be detrimental to dielectric breakdown strength, mechanical …
-
Novel iron-based oxide, hybrid and superlattice thin films - Versatility of atomic/molecular layer deposition
… The ε-Fe2O3 phase is known for its enormous coercive field (20 kOe) and multiferroic properties. Stable iron-organic hybrid thin films were successfully deposited with hydroquinone, 4-aminophenol and terephthalic acid as the organic precursors. Among the new hybrid thin films, the crystalline …
-
Electrical characterizations of lithium niobate thin films in a metal-ferroelectric-semiconductor capacitor
… behavior. The polarization density vs. electric field (P-E) curve shows that the remnant polarization is 16.85muC/cm2 and the coercive field is 117.25 KV/cm when maximum applied field is 286.2KV/cm for a sinusoidal input waveform. The capacitance vs. voltage bias (C-V) curve further demonstrates …
-
Multifunctional Transition Metal Oxide Core Shell Magnetic Nanoparticles
… reduced ZnO/iron oxide CSNPs. Variation in the coercive field and remnant and saturation magnetization further confirms the presence of different iron oxides in the shell region. Temperature and field dependent magnetization data establish the change in the near superparamagnetic behavior. …
-
Processing Effects for Integrated PZT: Residual Stress, Thickness, and Dielectric Properties
… stress-free value of 50muC/cm2. An increase in coercive field was attributed to interfacial capacitance and residual stress, whereas a decrease of 30MPa tensile stress resulted in an increase of d33 from 33 to 65pm/V, irrespective of changes in film thickness. These results isolated, for the …
-
Growth and Characterization of Organic Ferroelectric and Magnetic Thin Films
… a large spontaneous polarization and a small coercive field, as well as the origin of ferroelectricity in CA in terms of the photostriction effect, including the discovery and explanation of an abnormal long relaxation time. For organic magnetic materials, we focus on a spin crossover (SCO) …
-
Process Development and Characterization of Sol-Gel Lead Zirconate Titanate Films for Fabrication of Flexural Plate Wave Devices
… two fold improvement in remnant polarization and coercive field compared to industry recommended processes. Optimized films showed a remnant polarization of 95.7µC/cm2 and coercive filed of 56.7 KV/cm respectively. Several designs of the interdigitated electrodes (IDE/IDT) with varying periodicity …
-
Ferritas de cobalto dopadas com níquel: síntese, caracterização e propriedades magnéticas
… of the studied systems, but the high coercive field Hc (up to 1500 Oe) presented by the samples with higher content of the spinel phase was concluded that these systems displayed behavior of hard magnetic materials
-
Direct liquid injection metalorganic chemical vapor deposition of ferroelectric PZT films
… polarization from 20 to 50 µC/cm² and two-coercive field from 60 to 100 Kv/cm can be easily obtained from these PZT films which have the thickness range from 300 nm to 1000 nm. The remanent polarization was affected by Lanthanum doping, which decreased from 25µC/cm² at 0% La doping to …
-
Síntese e caracterizações estrutural e magnética das ferritas de cobalto-manganês (Co1-xMnxFe2O4 E Co1,2Fe1,8-xMnxO4)
… as the concentration of manganese, while the coercive field decreased. The anisotropy constant (Ke f ), was estimated from the data adjustments the law of approaching saturation. It was found that the anisotropy decreases substantially with the substitution of Fe by Mn.
Page 1 of 6