Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 390 for “"Coercivity"”.

  1. Development of High saturation magnetization and Low coercivity Fe-based amorphous/Nanocrystalline Alloys

    … and motors because of their low core loss, low coercivity Hc and high permeability compared to conventional silicon steels. However, the problem of the Fe-based amorphous alloy is its lower saturation magnetization Bs as compared to commercial silicon steels. In this work, a variety of Fe-based …

    unsw Repository record for Development of High saturation magnetization and Low coercivity Fe-based amorphous/Nanocrystalline Alloys (opens in a new tab)

  2. Using magnetism to characterize and distinguish high coercivity iron oxide and oxyhydroxide minerals in atmospheric dust

    … to separate remanence attributed to the high coercivity iron oxide and oxyhydroxide minerals hematite and goethite. Dust collected from mountain snow and dust source areas in nearby arid plains were analyzed using traditional room- and low temperature methods. Additional methods were created …

    umn Repository record for Using magnetism to characterize and distinguish high coercivity iron oxide and oxyhydroxide minerals in atmospheric dust (opens in a new tab)

  3. L10-FEPT BASED EXCHANGE-COUPLED COMPOSITE (ECC) MEDIA FOR PERPENDICULAR MAGNETIC RECORDING

    … due to the ultrahigh magnetic anisotropy and coercivity. This thesis focuses on the investigation of various L10-FePt based exchange-coupled composite (ECC) media in reducing the coercivity and the magnetization reversal mechanism. The coercivity of L10-FePt exchange spring multilayer was …

    nus Repository record for L10-FEPT BASED EXCHANGE-COUPLED COMPOSITE (ECC) MEDIA FOR PERPENDICULAR MAGNETIC RECORDING (opens in a new tab) Download file for L10-FEPT BASED EXCHANGE-COUPLED COMPOSITE (ECC) MEDIA FOR PERPENDICULAR MAGNETIC RECORDING (opens in a new tab)

  4. The Role of Microstructure on the Performance of Sintered Nd-Fe-B Magnets

    … provides the most significant increase to coercivity. For example, decreasing this angular dispersion from 30° to 1° increased the coercivity by 25% of its initial values. In addition, the presence of intergranular phases with high Fe/rare-earth ratios (Fe-like) led to the generation of …

    whiterose Download PDF for The Role of Microstructure on the Performance of Sintered Nd-Fe-B Magnets (opens in a new tab)

  5. Design of materials with small magnetic hysteresis: the unexpected role of magnetostriction.

    … loop, a conclusion referred to as the ’coercivity paradox.’ We argue that the basic idea of using micromagnetics to predict coercivity is reasonable, but the fault lies with presumptions; one needs to account for large but localized disturbances arising from potent defects. To …

    umn Repository record for Design of materials with small magnetic hysteresis: the unexpected role of magnetostriction. (opens in a new tab)

  6. Chemical remagnetization caused by burial diagenesis: Testing the hypothesis in the Pennsylvanian Belden Formation, Colorado.

    … an anhysteretic magnetization over a broader coercivity range than the TVRM. The CRM has higher coercivity and saturation remanence/saturation magnetization values indicating that it is carried by finer grains of magnetite than the TVRM. Coercivity and saturation magnetization ratios are …

    oklahoma-thes Repository record for Chemical remagnetization caused by burial diagenesis: Testing the hypothesis in the Pennsylvanian Belden Formation, Colorado. (opens in a new tab)

  7. Development of synthesis method for spinel ferrite magnetic nanoparticle and its superparamagnetic properties

    … magnetization, remnant magnetization and coercivity. However, in case of manganese ferrite where spin-orbit coupling is relatively small, increasing Cr3+ doping concentration, reduces all the magnetic parameters except coercivity. The coercivity increases due to smaller magnetocrystalline …

    gatech Repository record for Development of synthesis method for spinel ferrite magnetic nanoparticle and its superparamagnetic properties (opens in a new tab)

  8. Mischmetal substitution in Nd2Fe14B sintered permanent magnets

    … the important properties of permanent magnets is coercivity, which defines the ability of the magnet to work in a demagnetization field. Coercivity depends on magneto crystalline anisotropy and microstructure. The microstructure at the grain boundaries in sintered 2:14:1 type magnet helps to …

    iastate Repository record for Mischmetal substitution in Nd2Fe14B sintered permanent magnets (opens in a new tab)

  9. Magnetism of nanostructured permanent -magnet materials

    … Low Cu content makes the high-temperature coercivity vary in an abnormal way. A record-high high-temperature coercivity of 12.3 kOe at 500°C has been obtained. Granular SmCoz (z = 3–7.5) and Sm-Co-Cu-Ti thin films were produced by thermal processing of sputtered Sm-Co single layers and SmCo …

    nebraska Repository record for Magnetism of nanostructured permanent -magnet materials (opens in a new tab)

  10. Magnetic Hysteresis Curves of Thin Films under Isotropic Stress

    … magnetron sputtering. For 500 nm thick films the coercivity decreased with increasing pressure. The relation between coercivity and pressure appeared to be linear which makes these films very interesting for use in magnetic sensor devices. For 100 nm thick films there was no observed change in …

    texas-state Repository record for Magnetic Hysteresis Curves of Thin Films under Isotropic Stress (opens in a new tab)

  11. OPTIMIZING COBALT CARBIDE BASED NANOMATERIALS BY USING NUCLEATING AGENTS AND STATISTICAL ROUTES

    … carbide to be used as permanent magnet are high coercivity (Hc), high magnetization (Ms), resulting in a high-energy product (HcxMs). Previous literatures have shown coercivities of 1.5 to 2.5 kOe for cobalt carbides under aggressive temperatures conditions (300oC) or after aligning the particles …

    vcu Repository record for OPTIMIZING COBALT CARBIDE BASED NANOMATERIALS BY USING NUCLEATING AGENTS AND STATISTICAL ROUTES (opens in a new tab)

  12. Fused Filament Fabrication Additive Manufacturing of 17-4 PH Stainless Steel: Process–Structure–Property Relationships in Magnetic Materials

    … using vibrating sample magnetometry (VSM), with coercivity (����) and saturation magnetization (����) used as primary metrics for comparison across samples. Phase analysis was performed using X-ray diffraction (XRD) to examine the crystalline structure and identify dominant phases present after …

    vcu Repository record for Fused Filament Fabrication Additive Manufacturing of 17-4 PH Stainless Steel: Process–Structure–Property Relationships in Magnetic Materials (opens in a new tab)

  13. INVESTIGATION OF THE RESISTANCE TO DEMAGNETIZATION IN BULK RARE-EARTH MAGNETS COMPRISED OF CRYSTALLOGRAPHICALLY-ALIGNED, SINGLE-DOMAIN CRYSTALLITES WITH MODIFIED INTERGRANULAR PHASE

    … dissertation investigates whether an increased coercivity of Neodymium-Iron-Boron (Nd2Fe14B) based bulk magnets at elevated temperature (160°C), which is now only obtainable by substituting ~7wt% dysprosium (Dy) for a portion of neodymium (Nd), can be achieved through specific microstructural …

    mtu Repository record for INVESTIGATION OF THE RESISTANCE TO DEMAGNETIZATION IN BULK RARE-EARTH MAGNETS COMPRISED OF CRYSTALLOGRAPHICALLY-ALIGNED, SINGLE-DOMAIN CRYSTALLITES WITH MODIFIED INTERGRANULAR PHASE (opens in a new tab)

  14. Anisotropic hard magnetic nanoparticles and nanoflakes obtained by surfactant-assisted ball milling

    … SA – ball milling resulted in an increase of coercivity of SmCo5 particles from 0.45 T for un-milled powder to a maximum value of 2.3 T after 1 h of milling, further milling resulted in a decrease of the coercivity. The coercivity of SA – ball-milled Nd2Fe14B particles decreased drastically …

    qucosa-diss

  15. Structural and magnetic characterization of Nd-based Nd-Fe and Nd-Fe-Co-Al metastable alloys

    … K are typical of a hard magnetic material. The coercivity increases from 0.48 to 4.4 T with the temperature decreasing from 300 to 55 K. The demagnetization curves change from single to two-phase type when the temperature approaches 29 K, ordering temperature of fcc Nd-Fe solid solution. The …

    qucosa-diss

  16. MICROSTRUCTURE AND MAGNETIC PROPERTIES OF NANOCOMPOSITE ND-(FE, CO)-B PERMANENT MAGNET

    … 38 nm respectively. The dependence of intrinsic coercivity on melt-spinning speed roughly follows that of predicted based on single-domain mechanism. The melt-spinning speed that resulted in optimum coercivity depends strongly on Co content. Remanence enhancement was observed in most of the …

    nus Repository record for MICROSTRUCTURE AND MAGNETIC PROPERTIES OF NANOCOMPOSITE ND-(FE, CO)-B PERMANENT MAGNET (opens in a new tab) Download file for MICROSTRUCTURE AND MAGNETIC PROPERTIES OF NANOCOMPOSITE ND-(FE, CO)-B PERMANENT MAGNET (opens in a new tab)

  17. Magnetism in Ni80Fe20 and Ni80Fe20/NiO Nano-stripes

    … The effects of the constrained geometry on the coercivity, exchange bias field, and the superparamagnetic blocking temperature were studied. It was determined that the coercivity, exchange bias field and the superparamagnetic blocking temperature can be controlled, not only by using a patterned …

    manitoba Repository record for Magnetism in Ni80Fe20 and Ni80Fe20/NiO Nano-stripes (opens in a new tab)

  18. Particle shape anisotropy and its effects in AlNiCo and Fe-Cr-Co magnet alloys.

    … the properties of magnetic anisoiropy and coercivity) in a manner consistent with a common transformation mechanism. The evidence supports the view that this mechanism is spinodal decomposition, which initially produces an homogeneous, fine shape-anisotropic particle microstructure, and by …

    sheffield-hallam Download PDF for Particle shape anisotropy and its effects in AlNiCo and Fe-Cr-Co magnet alloys. (opens in a new tab)

Page 1 of 20