Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"Cohesive Zone Modeling"”.
-
Cohesive zone modeling for predicting interfacial delamination in microelectronic packaging
… crack locations and crack propagation paths. Cohesive zone theory has been identified as an alternative method for modeling crack propagation and delamination without the need for a pre-existing crack. In a cohesive zone approach, traction forces between surfaces are related to the crack tip …
-
Cohesive zone modeling of fracture of sustainable and functionally graded concrete
… is developed; which incorporates a variety of cohesive zone models (CZMs) into an implicit, nonlinear finite element scheme. Intrinsic cohesive zone elements, with traction-separation relationships defined along the crack surface, are utilized to simulate mode I fracture of the slabs. Based on …
-
Fracture of Asphalt Concrete: A Cohesive Zone Modeling Approach Considering Viscoelastic Effects
… occurring in a relatively large fracture process zone, a cohesive zone model (CZM) is employed. Finite element implementation of the CZM is accomplished via user subroutines that can be used in conjunction with general-purpose software. The bulk properties (e.g. relaxation modulus) and fracture …
-
A Parametric Study of Cohesive Zone Modeling Applied to Interfaces Under High Impact Velocity Collisions
… subjected to high-velocity impacts using the cohesive zone model. The current work explores the sensitivity of a sugar-PMMA heterogeneous system to interface properties like stiffness, strength, and fracture energy both for normal and oblique impacts. Cohesive zone modeling is common for …
-
Finite Element Modeling of Shallowly Embedded Connections to Characterize Rotational Stiffness
… or one part model; a contact-based model; and a cohesive-zone based model. Cohesive-zone modeling was found to give the most accurate results. Agreement with previous experimental data was obtained to within 27%. Baseplate geometry was found to affect connection stiffness significantly, …
-
Fracture and delamination of elastic thin films on compliant substrates : modeling and simulations
… as linear elastic except for the damage zone around the crack tip. Alternatively, a nonlinear cohesive zone model (CZM) can be used to simulate both nucleation and growth of cracks. In this dissertation, the approaches of LEFM and CZM are employed to study fracture and delamination of …
-
Development of a fatigue-compatible cohesive zone method for a copper-epoxy molding compound bimaterial interface
… the development of a computationally affordable modeling methodology with predictive capability towards fatigue crack propagation and failure is needed. This present work focuses on copper/epoxy mold compound (EMC) interfacial delamination under fatigue loading both through experiments as well as …
-
Tensile property uncertainty in upcycled discontinuous prepreg platelet molded composites considering distributions of platelet shape and size
… with a continuum damage mechanics (CDM) and cohesive zone modeling (CZM)- based finite element model to capture intra- and interlaminar damage modes. The predicted effective stiffness, strength, and their variability determined were validated through experimental testing. PPMC/TET are shown …
-
FRACTURE AND FATIGUE CHARACTERIZATION OF STABILIZED SOILS AND SULFUR-EXTENDED ASPHALT USING MONOTONIC AND CYCLIC SEMI-CIRCULAR BENDING TESTS
… fracture properties of the CSM three-dimensional cohesive zone modeling was used and the simulations agreed very well with the experimental results. Both of the fracture properties obtained from the experiment and the cohesive zone modeling indicated that polymer-stabilized limestone exhibited a …
-
ASSESSMENT OF INTERFACIAL ADHESION IN POLYMER LAMINATED SHEET METALS
… analyzed with two different approaches common in cohesive zone modeling in the literature, namely linear elastic stiffness approach and critical maximum stress approach. The modeling results revealed the significance of the peel speed in determining the interface strength between the adhesive and …
-
Interface Behaviour and Mechanical Anisotropy in Layered Concrete Applicable to 3D Concrete Printing: Experimental and Numerical Investigations
… using an interface-based finite element (FE) modeling approach. A Cohesive Zone Modeling (CZM) framework is used to explicitly simulate interfaces. The framework is calibrated and validated using experimental data from the literature and subsequently employed to evaluate the influence of …
-
Development of FEA models to study contusion patterning in layered tissue and the shaft loaded blister test
… the SLBT with finite element analysis and cohesive zone modeling, the assessment of various analytic models will provide insight into how to accurately measure the fracture energy for both the simulation and experiment. This provides insight into the interactions between a film, the …
-
Study of Interfacial Crack Propagation in Flip Chip Assemblies with Nano-filled Underfill Materials
… (NFU) through experiments and theoretical modeling. In this work, the thermo-mechanical properties of NFUs with 20-nm filler particles have been measured. An innovative residual stress test method has been developed to measure the interfacial fracture toughness. Using the developed residual …
-
Quasi-static non-ordinary state-based peridynamics for the modeling of 3D fracture
A majority of the efforts in modeling crack propagation have used continuum models built upon partial derivatives with respect to the spatial coordinates in the force and displacement relationship. These methods are inherently incompatible for modeling cracks because the partial derivatives are …
-
Structural Repurposing of Decommissioned Wind Turbine Blades for Civil Infrastructures
… testing, structural experiments, finite element modeling, and full-scale prototype construction. Mechanical testing of spar cap specimens from DWTBs revealed strong residual properties, including 90 ksi tensile and 54 ksi compressive strength in the longitudinal direction. Full-scale bending …
-
Damage evolution in quasi-statically indented alumina based oxide/oxide ceramic matrix composites : experiment and modeling.
… predicted by the finite element method using the cohesive zone modeling approach, with experimentally determined mode II energy release rate used as the fracture mechanics-based input parameter. Validation with experimental results showed that the model correctly captured the mechanics of the …
-
Simulation and testing of low velocity impact damage and compression after impact for polymer matrix composite laminates.
… propose a three-dimensional finite element (FE) modeling approach to investigate damage mechanisms during a low-velocity impact in laminated carbon fiber reinforced polymer (CFRP) composites. The models incorporate continuum damage mechanics (CDM) with Hashin 3D failure criteria and cohesive zone …
-
Z-PINNING TECHNIQUES AND MODELING IN COMPOSITE LAMINATES AND X-COR SANDWICH STRUCTURES
… sandwich materials under compression and shear. Cohesive Zone Modeling (CZM) is a numerical technique used to model composite delamination in conjunction with FE models, A material damping based approach is proposed to encounter the typical convergence issues faced by CZM and is implemented on FE …
Page 1 of 3