Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 42 for “"Cohesive Zone Models"”.

  1. Understanding cohesive zone models : top-down and bottom-up approaches

    … devices and packaging. Over the years, cohesive zone modelling has emerged as the natural successor to the classical linear elastic fracture mechanics. Cohesive zone modeling relies on the accurate description of the damage zone through the traction-separation relations relating the …

    texas Repository record for Understanding cohesive zone models : top-down and bottom-up approaches (opens in a new tab)

  2. Dynamic Fracture of Adhesively Bonded Composite Structures Using Cohesive Zone Models

    … of cracks without specifying an initial crack. A cohesive-decohesive zone model, similar to the cohesive zone model known in the fracture mechanics literature as the Dugdale-Barenblatt model, is adopted to represent the degradation of the material ahead of the crack tip. This model unifies …

    vt Repository record for Dynamic Fracture of Adhesively Bonded Composite Structures Using Cohesive Zone Models (opens in a new tab)

  3. Simulation of delamination in composite materials under static and fatigue loading by cohesive zone models

    … work presents an examination of the potential of cohesive interface elements for the prediction of delamination propagation under quasi-static mode I, mode II and mixed mode (I and II) loading, by a comparison between experimental tests and parametric analyses in order to evaluate the sensitivity …

    cagliari Repository record for Simulation of delamination in composite materials under static and fatigue loading by cohesive zone models (opens in a new tab)

  4. Damage initiation and propagation in composite materials. Boundary element analysis using weak interface and cohesive zone models

    La presente tesis ha sido desarrollada en el Grupo de Elasticidad y Resistencia de Materiales, Departamento de Mecánica de Medios Continuos, Teoría de Estructuras e Ingeniería del Terreno de la Universidad de Sevilla. El trabajo se centra en dos líneas de investigación del Grupo de Elasticidad y …

    sevilla Repository record for Damage initiation and propagation in composite materials. Boundary element analysis using weak interface and cohesive zone models (opens in a new tab)

  5. Effect of temperature and humidity conditioning on mold compound/copper interfacial fracture and the associated cohesive zone models

    … and humidity conditioning will influence the cohesive zone models (CZM). Starting with an EMC/Copper sample with a starter crack, this work uses a Double Cantilever Beam (DCB) test to obtain the critical load for crack propagation at various crack lengths. Using the experimental data in …

    gatech Repository record for Effect of temperature and humidity conditioning on mold compound/copper interfacial fracture and the associated cohesive zone models (opens in a new tab)

  6. Sensitivity and Uncertainty Quantification of Continuum and Stochastic Bond Dissociation Kinetics Based Cohesive Laws

    … parameters governing the constitutive laws. Cohesive zone models are largely employed in fracture mechanics to predict failure of interfaces undergoing large plastic deformations. The objective of this report is to employ the cohesive zone models to predict fracture of polymeric interfaces. …

    mtu Repository record for Sensitivity and Uncertainty Quantification of Continuum and Stochastic Bond Dissociation Kinetics Based Cohesive Laws (opens in a new tab)

  7. Modeling competing fracture for dry transfer of thin films to a flexible substrate

    … knowledge through computational analysis with cohesive zone models. Two approaches are used: 2D finite element simulations and 1D finite difference beam theory models. Both mode I and mixed-mode fractures are simulated. Scaling equations are developed to quantify load, crack length, end …

    texas Repository record for Modeling competing fracture for dry transfer of thin films to a flexible substrate (opens in a new tab)

  8. Modeling of Debonding and Crack Propagation in Fibrous Composites Using a Discontinuous Galerkin Approach

    … are then compared against an existing intrinsic cohesive zone method and a hybrid Discontinuous Galerkin method. The results show that the method can eliminate the problem of artificial compliance that is associated with intrinsic cohesive zone models. Eliminating this stiffness has the positive …

    ut-knoxville Repository record for Modeling of Debonding and Crack Propagation in Fibrous Composites Using a Discontinuous Galerkin Approach (opens in a new tab)

  9. DELAMINATION IN MICROELECTRONICS PACKAGES: WITH CONSIDERATION OF THREE-DIMENSIONAL AND RATE EFFECTS

    … through numerical studies. Finite element models (FEM) accompanied with interfacial fracture mechanics concepts and cohesive zone models (CZM) are employed in this work. Besides, experiments were carried out to capture the characteristics of delamination propagation. The scope of analyses …

    nus Repository record for DELAMINATION IN MICROELECTRONICS PACKAGES: WITH CONSIDERATION OF THREE-DIMENSIONAL AND RATE EFFECTS (opens in a new tab) Download file for DELAMINATION IN MICROELECTRONICS PACKAGES: WITH CONSIDERATION OF THREE-DIMENSIONAL AND RATE EFFECTS (opens in a new tab)

  10. A numerical model for the simulation of hydrogen embrittlement mechanism in presence of dynamic hydrogen coverage

    … challenges of our time is thedevelopment of models that predict the onset and propagation of damage in corrosiveenvironments. This thesis aims to contribute to this goal by using cohesive zone models and amechanistic characterization of the mechanical behaviour in the vicinity of the …

    strathclyde Repository record for A numerical model for the simulation of hydrogen embrittlement mechanism in presence of dynamic hydrogen coverage (opens in a new tab)

  11. Development of filled polymers for the replacement of ceramics used as ballistic protection layer

    … to the particle/matrix debonding mechanism. Cohesive zone models (CZM) and Finite Fracture Mechanics (FFM) approaches were used to model this phenomenon and a strong effect of the particle size on decohesion was observed.

    oxford-brookes Repository record for Development of filled polymers for the replacement of ceramics used as ballistic protection layer (opens in a new tab) Download PDF for Development of filled polymers for the replacement of ceramics used as ballistic protection layer (opens in a new tab)

  12. A Multiscale Method for Simulating Fracture in Polycrystalline Metals

    … dynamics simulation and are mapped into cohesive zone models for continuum modeling within a finite element framework. Fracture along grain boundaries typically exhibit a dependence of crack tip processes (i.e. void nucleation in brittle cleavage or dislocation emission in ductile …

    vt Repository record for A Multiscale Method for Simulating Fracture in Polycrystalline Metals (opens in a new tab)

  13. Effects of Bondline Thickness on Nonlinear Interfacial Fracture of Bonded Adhesive Joint

    … of modern industries. In the recent two decades, cohesive zone models (CZMs) have been receiving intensive attentions for fracture problems of adhesively bonded joints due to its fairly simple and accurate predictive ability. In CZMs the nonlinear interfacial fracture behaviors are described by …

    lsu-thes Repository record for Effects of Bondline Thickness on Nonlinear Interfacial Fracture of Bonded Adhesive Joint (opens in a new tab)

  14. Deep Learning Based Stress Prediction for Bottom-Up Stereo-Lithography (SLA) 3D Printing Process

    … high-quality parts using bottom-up SLA printing. Cohesive Zone Models have been successfully used to model the separation process in bottom-up SLA printing process. However, the Finite Element (FE) simulation of the separation process is prohibitively computationally expensive and thus cannot be …

    buffalo Repository record for Deep Learning Based Stress Prediction for Bottom-Up Stereo-Lithography (SLA) 3D Printing Process (opens in a new tab)

  15. Mixed-Mode Dynamic Crack Propagation using the Discontinuous Galerkin Method

    … of artificial compliance compared to intrinsic cohesive zone elements. The purpose of this thesis is to apply the DG method to a mixed-mode dynamic crack propagation problem, namely the Kalthoff-Winkler experiment. The Kalthoff-Winkler experiment is a benchmark dynamic fracture problem for …

    ut-knoxville Repository record for Mixed-Mode Dynamic Crack Propagation using the Discontinuous Galerkin Method (opens in a new tab)

  16. Characterisation and modelling of the rate-dependent behaviour of adhesive bonded interfaces

    … properties to derive accurate adhesive interface models – such as the cohesive zone modelling approach. First, this thesis explores a newly developed experimental method. This was developed to enable the characterisation of adhesive joints for different loading rates. The method is then used to …

    oxford Repository record for Characterisation and modelling of the rate-dependent behaviour of adhesive bonded interfaces (opens in a new tab)

  17. Characterization and Analysis of Damage Progression in Non-Traditional Composite Laminates With Circular Holes

    … were compared with linear and bi-linear cohesive zone models to determine applicability to non-traditional laminates.

    gatech Repository record for Characterization and Analysis of Damage Progression in Non-Traditional Composite Laminates With Circular Holes (opens in a new tab)

  18. The adhesive interactions between graphene and substrates by blister tests

    … were measured by two synchronized camera. Cohesive zone models associated with traction-separation relations were developed to study the damage initiation and crack propagation under various mixed-mode conditions. It was determined that the maximum normal and shear strength, which governed …

    texas Repository record for The adhesive interactions between graphene and substrates by blister tests (opens in a new tab)

  19. PHASE-FIELD METHOD OF FRACTURE IN FIBER-REINFORCED POLYMER COMPOSITES: THEORY, MODELING, AND VALIDATION

    … a predominant failure mechanism in FRPCs. While cohesive zone models (CZMs) are commonly used for delamination, they are computationally expensive and inefficient for capturing intralaminar fractures where crack paths are unknown. To address this, we developed a unified phase field-based cohesive …

    mtu Repository record for PHASE-FIELD METHOD OF FRACTURE IN FIBER-REINFORCED POLYMER COMPOSITES: THEORY, MODELING, AND VALIDATION (opens in a new tab)

Page 1 of 3