Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 62 for “"Coin Cell"”.
-
Physics-Based Li-Svo Cathode Model
A cathode half cell physics-based model for a St. Jude Medical fabricated silver vanadium oxide (SVO) cathode coin cell battery was constructed. The model is based on a single particle Fick's second law approach with the open-circuit potential modeled with a Redlich-Kister equation. By assuming …
-
An Investigation on Renewable Carbons as Natural Sources of Fluorescent and Conductive Materials for Smart Device Applications
… renewable carbon was applied as the cathode of a coin cell battery. To reduce processing temperature further, hydrothermal pyrolysis was performed at 180 ˚C on xylem sap. A characteristic crystalline sp2 carbon was observed in hydrochar xylem syrup. When UV light is shone on the carbon, by the …
-
Structural Composite Electrode for Space Applications
… The SBBE-coated carbon fiber versus lithium half-cell is studied in coin cell configuration. The solid biphasic bicontinuous electrolyte is made from lithium bis(trifluoromethanesulfonyl)imide salt, diglyme, and fluoroethylene carbonate for the liquid electrolyte ionic-conducting phase and resin …
-
Innovative Strategies for Stabilizing Zinc Anodes: From Molecular Design to Practical Zinc-Ion Batteries
… and electrolyte design in laboratory-scale coin cells and then applies these concepts to practical pouch-cell configurations. For the typical laboratory-scale coin cell, high-stability Zn anodes and high-performance AZIBs are developed through synergistic strategies that combine a molybdenum …
-
ORGANIC FLEXIBLE BATTERY: DESIGN, SYNTHESIS AND CHARACTERIZATION OF N-TYPE ORGANIC STORAGE AND TRANSPORT MATERIALS
… battery is a promising alternative. Last the cell performance based on state-of-the-art n-type is reviewed. Chapter 2 describes the Ag/Ag2S reference electrode designed for electrochemical characterization in the organic system and five polymer storage materials are measured against home-made …
-
Fabrication and functionalization of carbon nanocages for use in CFx batteries.
… a CFx cathode. This cathode is then tested in a coin cell primary battery with a lithium anode. Results indicate that a specific capacity of 660 mAh/g was achieved for a sample with a calculated x value of 0.93.
-
Printable lithium batteries
… lifetime performance of the printed cathodes. Cells were constructed using a standard 2032 coin cell to ensure uniform electrode size and pressure on the layers of the battery. Cathodes printed exhibited up to 115 mAh/g capacity with a commercial separator and have 89% retention of capacity …
-
Prolonged slow cycling in aqueous Zn-MnO₂ batteries
… and dendritic growth. Symmetric Zn||Zn cells cycle beyond ~ 1200 h at 0.5 mA cm⁻² and 1 mAh cm⁻², with improved stability under higher rate stress protocols.Second, replicated coin cell datasets, coulombic efficiency, and survival analysis show that cathode architecture strongly governs …
-
Operando X-Ray Analysis Of Battery Materials
… lithium-ion battery (LIB). A specially designed coin cell allows for the investigation of chemical changes as observed with X-rays within the LIB as a function of the state of charge. This cell design has been used to study germanium nanowire anodes and anthraquinone-based cathodes at the Cornell …
-
An investigation of materials and printing methods on the response of 3D printed supercapacitors
… 3D-printing methods (Vat-P and FDM). Two cell types are made in this study, one with metallized Vat-P-printed current collectors, the other with conductive PLA (polylactic acid) FDM-printed current collectors in a similarly designed printed coin cell. In Chapter 3, an array of carbon-based …
-
Controlled prelithiation of PbS to Pb/Li₂S for high initial Coulombic efficiency in lithium ion batteries
… 0.15% capacity loss per cycle. However, its half cell initial Coulombic efficiency (ICE) was only 40%, due to a combination of irreversible Li₂S and solid electrolyte interface (SEI) formations. A custom controlled prelithiation technique was then applied to the PbS electrodes, converting the …
-
STUDIES OF ANODES AND THEIR INTERACTIONS WITH ELECTROLYTES IN SODIUM-ION BATTERIES
… 1M NaClO4 in EC:PC. Cycling performance in half-cell and full-cell are illustrated and more importantly, thermal stability and investigations on solid electrolyte interphase (SEI) are discussed. Optimization study on the non-flammable electrolyte, 1M NaBF4 in tetraglyme was carried out with two …
-
Investigating the role of electrode placement for operando APXPS battery studies
… these studies are performed in open beaker cells, where the electrodes are separated by ∼1 cm. Large separations between the electrodes has been found to result in distinct electrochemical behaviour of the cell compared to closely spaced electrodes in a coin cell. In this work, a new sample …
-
An Analysis of Bluetooth Low Energy in the Context of Intermittently Powered Devices
… to run for several years, even off of a simple coin cell. But batteries must still be replaced. The emergence of batteryless devices is gaining momentum due to their ability to run for decades with no maintenance. The design of BLE relies on exact timing, which usually means a constant power …
-
POLYMER/CERAMIC HYBRID COATED SEPARATORS FOR LITHIUM SULFUR BATTERY
… of the ceramic to improve electrochemical, and cell performance, and coating the polymer/ceramic blend on Celgard separator. Coin cell tests with the PVDF/ceramic hybrid coated separator also show excellent stable cycle performance. Furthermore, effective fabrication of free-standing non-woven …
-
Fabrication of high energy density tin/carbon anode using reduction expansion synthesis and aerosol through plasma techniques
… support. The use of the electrodes as part of coin cell batteries resulted in capacitance values of 320 mAh/g and 110 mAh/g for lithium-ion and sodium-ion batteries, respectively. Nano-sized Sn particles were found before and after cycling. It is believed that bonds between metal atoms and …
-
STABILIZING ZINC ELECTRODEPOSITION IN A BATTERY ANODE BY CONTROLLING CRYSTAL GROWTH
… approach are demonstrated in Zn-I2 full battery cells, designed in both coin cell and single-flow battery cell configurations. In both contexts, we find that control of the Zn crystallography enables batteries with long-term cycling stability at high areal capacity. The crystal growth …
-
Mechanics of electrode materials in lithium battery applications.
… working electrode surface within a custom CR2032 coin cell lithium battery. Digital image correlation is used to quantify electrode strains throughout the discharge-charge process. The effect of constraint due to substrate stiffness is investigated for two film materials: traditional graphite and …
-
The Performance of Structured High-Capacity Si Anodes for Lithium-Ion Batteries
… on the electrodes assembled in a CR2025 coin cell with a metallic Li foil as the counter electrode. The impact of the electrode structure on the capacity at various current densities was investigated. Experimental results demonstrated the importance of control over the superficial area …
-
Estimating Parameters for a Doyle Fuller Newman Model of a Graphite Half Cell Battery
… Fuller Newman model for a graphite vs. lithium coin cell battery. These estimates were obtained from scanning electron microscopy images, the galvanostatic intermittent titration technique, and electrochemical impedance spectroscopy. These estimates were put into a Doyle Fuller Newman model in …
Page 1 of 4