Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 49 for “"Coin Cells"”.
-
Performance Characteristics of Lithium Coin Cells for Use in Wireless Sensing Systems
… pulsed discharge behavior of low-rate lithium coin cells in wireless sensing systems is critical to prolong the operating life and/or reduce the size of battery-powered WSs. This dissertation presents the battery transient analysis for a sensor duty cycle, experimental studies for sustained …
-
Obscure Variables in Battery Research: Impacts of Spacer Thickness and Slurry Formulation Protocols
… evaluation still relies on small, lab-scale coin cells, where often-overlooked factors can significantly affect test results. This work investigates two critical yet underexamined aspects of electrode performance: cell pressure and slurry formulation. First, the impact of spacer thickness, …
-
Investigating the role of electrode placement for operando APXPS battery studies
… these studies are performed in open beaker cells, where the electrodes are separated by ∼1 cm. Large separations between the electrodes has been found to result in distinct electrochemical behaviour of the cell compared to closely spaced electrodes in a coin cell. In this work, a new sample …
-
Advanced optimization preocedures for lithium-ion battery insertion cathodes
… performance was evaluated through half-coin cells (HCC), electronic resistance meas-urement (ERM), and electrochemical impedance spectroscopy (EIS) using three-electrode cells. Experimental data were used to develop semi-empirical models and behavioral schemes, offering new insights into …
-
The development and fabrication of miniaturized direct methanol fuel cells and thin-film lithium ion battery hybrid system for portable applications
… and voltage loss were evaluated for Panasonic coin cells and thin film LiPON cells. It was observed that the thin film battery outperformed the others in terms of low energy loss. Nonetheless, the performance of small Panasonic coin cells with vanadium oxide cathode was comparable at low …
-
Physics-Based Li-Svo Cathode Model
… fabricated silver vanadium oxide (SVO) cathode coin cell battery was constructed. The model is based on a single particle Fick's second law approach with the open-circuit potential modeled with a Redlich-Kister equation. By assuming that lithium ions intercalate only through the ends of the …
-
Evaluation of the Cycle Profile Effect on the Degradation of Commercial Lithium Ion Batteries
… commercial high-power prismatic lithium ion cells were cycled using a pulse-heavy profile and a simple square-wave profile to investigate the effect of cycle profile on the capacity fade of the battery. The pulse-heavy profile was designed to simulate on-road conditions for a typical hybrid …
-
Extraction And Purification Of Humic Acid From Leonardite As A Graphene Precursor For Lithium Ion Battery Cathodes
… improvement in electrochemical performance of coin cells prepared with graphene-modified lithium iron phosphate compared to reference cells. The extraction process and purification regime developed in this research has resulted in a procedure for reliably obtaining high-purity humic acid from …
-
A study of electrolytes for rechargeable zinc-metal batteries
… on the stability and Coulombic efficiency of coin cells were also investigated. To explore the effects of additives sulfated cellulose nanocrystals (CNC) and sodium carboxymethyl cellulose (CMC) were added to the electrolyte and the characterization was performed once again on these new …
-
DEVELOPMENT OF SINGLE ION CONDUCTING POLYMERIC ELECTROLYTES FOR LITHIUM-ION BATTERIES
… concept of single ion conducting electrolyte was coined. In this thesis, a series of new polymer and three dimensional network based single ion conducting electrolytes are designed, successfully. The utility of these electrolytes in lithium ion batteries is demonstrated by assembling several coin …
-
Possibilities of minimising cobalt usage in the electric passenger car industry
… By using literature studies and manufacturing coin cells with different cathode chemistries, this report aims to investigate whether alternative cathodes can be used today or within the near future. The investigated cathodes were examined in terms of cost, performance, safety, environmental- …
-
Organic & Polymer-based Lithium Ion Batteries
… electrode and polymer electrolyte. Conventional coin cells with standard electrode and electrolyte materials were also assembled and tested for comparison. Cyclic voltammetry, electrochemical impedance spectroscopy and SEM are included.
-
Disordered alkali-niobates for use as a sodium-ion battery anode material
… niobates were studied within sodium half cell, coin cells by galvanostatic (dis)charge and cyclic voltammetry (CV). HNb3O8 showed the highest capacity (122.0 mAhg-1 after 20 cycles at 3mAg-1) consistent with previous work, theorised to be due to the small interlayer ion H+. The nanostructured …
-
An Investigation of the effect of Integrating Graphene Oxide on Sodium Yttrium Fluoride Gel on Its Electrochemical Performance as a Battery Electrode
… area. NaYF-GO electrodes were fabricated into coin cells for testing in a Lithium Ion Battery system. The enhancement of NaYF’s electrochemical activity was confirmed with a total differential capacity versus voltage plot.
-
Fluoride-ion batteries with liquid electrolytes
… an accurate and reliable testing set-up, such as coin or pouch cells. <br><br>In this work, first I enable the use of coin cells for FIBs by identifying hydrophilic PTFE as a suitable separator, as well as by manufacturing a reliable counter-reference electrode using Pb-PbF<sub>2</sub>, with PTFE …
-
3D Printing of Zinc Anode for Zinc Ion Batteries
… surpassing conventional battery designs such as coin cells or pouch cells and can be used to design printed energy storage systems.
-
Scale-Up Manufacturing of PEG-Based Electrolytes for All-Solid-State Batteries Using Slot-Die Coating
… on electrodes were incorporated into coin cells and characterized using electrochemical impedance spectroscopy (EIS). The slot-die- coated electrolytes exhibited ionic conductivities on the order of 10−6 S cm−1, comparable to values reported for polymer electrolytes in the literature …
-
A STUDY OF HEAT GENERATION AND CYCLING PERFORMANCE OF SODIUM-ION CELLS
… of different 18650-sized sodium-ion cells with monoclinic Na<sub>2</sub>Fe<sub>2</sub>(CN)<sub>6</sub>·2H<sub>2</sub>O (MPB), rhombohedral Na<sub>2</sub>Fe<sub>2</sub>(CN)<sub>6</sub> (RPB), pristine Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> (P-NVP), and modified …
-
Bio-Based Thiol-ene Polymer Electrolytes
… for LIB polymer electrolytes. Assembly in coin cells reveals the need for reduced ion aggregation in the polymers and improved contact at the electrolyte-electrode interface. Efforts to address these concerns are attempted and future work is discussed. The conducting abilities of the …
-
Performance Limiting Factors for Silicon Anodes in Lithium-ion Batteries
… and limitations of Si-based electrodes using coin cells and ex-situ three-electrode cells. A comparison of electrochemical testing methods – i.e., Galvanostatic Intermittent Titration Technique (GITT) and Intermittent Current Interruption (ICI) – was performed to assess lithium-ion diffusion …
Page 1 of 3