Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 211 for “"Cold Formed Steel"”.

  1. Simulation of cold-formed steel structures

    Buildings framed from cold-formed steel members are becoming increasingly common. Simulation of cold-formed steel (CFS) structures in this dissertation includes seismic modeling and analysis of a two-story CFS-framed archetype building from the CFS-NEES project and shape optimization of CFS columns …

    jhu Repository record for Simulation of cold-formed steel structures (opens in a new tab)

  2. Fire Performance of Cold-Formed Steel Walls

    … on the behavior, modeling and design of cold-formed steel (CFS) subjected to fire, grounded on experimental studies and engineering-based numerical analysis of CFS materials, members, connections, and systems at elevated temperatures. The experimental program presented herein includes …

    jhu Repository record for Fire Performance of Cold-Formed Steel Walls (opens in a new tab)

  3. MODELING COLD-FORMED STEEL MEMBERS AND SYSTEMS

    … This dissertation includes eight chapters on cold-formed steel modeling rersearch. With the development of structural analysis software, computer simulation becomes an important tool for structural engineers and researchers to understand structural behavior. Structural performance can be …

    jhu Repository record for MODELING COLD-FORMED STEEL MEMBERS AND SYSTEMS (opens in a new tab)

  4. Failure analysis of cold-formed steel sections

    … is to investigate the failure behaviours of cold-formed zed and channel sections for use in purlin-sheeting systems. Both the energy method and finite strip method are used to develop an approach to investigate cold-formed zed and channel section beams with partial-lateral restraint from the …

    aston Download PDF for Failure analysis of cold-formed steel sections (opens in a new tab)

  5. Global optimisation of cold-formed steel sections

    … are used to carry out the optimisation of cold-formed steel purlins such as zed, channel and sigma sections, which are assumed to be simply supported and subjected to a gravity load. For zed, channel and sigma section, the local buckling, distortional buckling and lateral-torsional buckling …

    aston Download PDF for Global optimisation of cold-formed steel sections (opens in a new tab)

  6. Fire performance of cold-formed steel sections

    Thin-walled cold-formed steel (CFS) has exhibited inherent structural and architectural advantages over other constructional materials, for example, high strength-to-weight ratio, ease of fabrication, economy in transportation and the flexibility of sectional profiles, which make CFS ideal for …

    plymouth Repository record for Fire performance of cold-formed steel sections (opens in a new tab)

  7. Design of general cold-formed steel shapes

    The structural design or cold-formed steel members is a complex process. In addition to limiting the stresses to those allowed by the material, other modes or failure must be considered. Typically, cold-formed steel shapes are made from relatively thin material, and therefore are subject to local …

    ku Repository record for Design of general cold-formed steel shapes (opens in a new tab)

  8. Cold-formed steel compression members with perforations

    … the post-local buckling strength of perforated cold-formed steel (CFS) members subjected to axial compression loading.</p> <p>Cold-formed steel sections are widely used nowadays as primary and secondary framing members in low-rise steel buildings. Although CFS members are essentially thin-walled …

    mcmaster Repository record for Cold-formed steel compression members with perforations (opens in a new tab)

  9. Vibration Serviceability of Cold-Formed Steel Floor Systems

    … significant problem associated with lightweight steel floor systems, especially cold-formed steel (CFS) floors. Methods for accurately predicting these vibrations and evaluating floor systems are not readily available to the design community. The limited amount and complexity of research on the …

    waterloo Repository record for Vibration Serviceability of Cold-Formed Steel Floor Systems (opens in a new tab)

  10. Reliability based criteria for cold-formed steel members

    "In the design of steel buildings, the "Allowable Stress Design (ASD)" method has long been used for cold-formed steel structural members in the United States and other countries. In this approach, member forces, or moments, determined on the basis of working loads should not exceed the allowable …

    must-thes Repository record for Reliability based criteria for cold-formed steel members (opens in a new tab)

  11. Axial load capacity of cold-formed steel sections.

    Cold-formed steel strut purlins are important compression members in metal building wind bracing systems. They are generally located under the roof panel either in the braced bay or between the end wall and the first wind-braced bay in the building. Cold-formed Zee and Cee sections are typically …

    oklahoma-thes Repository record for Axial load capacity of cold-formed steel sections. (opens in a new tab)

  12. Resistance Factor for Cold-Formed Steel Compression Members

    … if the LRFD strength reduction factor for cold-formed steel compression members can be increased above its current value of Ï c = 0.85, which was established by the LRFD Cold-Formed Steel Design Manual (1991) on the basis of 264 column tests. The resistance factor in the Canadian code for …

    vt Repository record for Resistance Factor for Cold-Formed Steel Compression Members (opens in a new tab)

  13. Experiments on Cold-Formed Steel Beams with Holes

    … testing and elastic buckling studies were performed on 68 C-section cold-formed steel joists with unstiffened rectangular web holes. Four Steel Stud Manufacturers Association (SSMA) cross-section types; 800S200-33, 800S200-43, 1000S162-54, and 1200S162-97, were evaluated to explore the …

    vt Repository record for Experiments on Cold-Formed Steel Beams with Holes (opens in a new tab)

  14. Development of a Novel Cold-Formed Steel Truss System

    In recent years, cold-formed (CFS) trusses have gained popularity due to many advantages such as being lightweight, non-combustible, termite and rot resistant, flexible in design, and ease of handling and fabrication. Often CFS trusses are designed and assembled at a plant and then transported to …

    auckland-ms Repository record for Development of a Novel Cold-Formed Steel Truss System (opens in a new tab)

  15. Behaviour, optimisation and design of cold-formed steel purlins

    Purlins are arguably the most widely used cold-formed steel members in construction. They are employed as secondary steelwork to support roof cladding, transfer loads and offer effective restraint to the primary steel members. Owing to their thin-walled nature, they are susceptible to a variety of …

    birmingham Download PDF for Behaviour, optimisation and design of cold-formed steel purlins (opens in a new tab)

  16. Connections in cold-formed steel modular building structure systems

    … construction has been used for many years. Cold-formed steel with its advantages is commonly utilized in the modules. However, the challenge comes to the connections. Connections generally take substantial part of the expenditures. An easy erection and effective connection method could …

    birmingham Download PDF for Connections in cold-formed steel modular building structure systems (opens in a new tab)

  17. Experimental study of cold formed steel roof truss connections

    Cold-formed steel (CFS) roof trusses are commonly used due to their cost effectiveness, reliability, and high stiffness to weight ratio. To increase the effectiveness of these widely used trusses, the overall research project aims at evaluating the response of CFS roof trusses under static and …

    missouri Repository record for Experimental study of cold formed steel roof truss connections (opens in a new tab)

  18. Cold-Formed Steel Member Connections Using BAC Screw Fasteners

    … tension strength values for the screws used in cold-formed steel connections. The thesis presents the design methods and test program conducted to investigate the behavior and strength of the screw connections in shear and tension test. Test results were compared with AISI design provisions to …

    unt Repository record for Cold-Formed Steel Member Connections Using BAC Screw Fasteners (opens in a new tab)

Page 1 of 11