Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 48 for “"Cold-Wall"”.
-
Cold wall reactor for ultra-high vacuum high temperature chemical vapor deposition
… discusses the design and construction of a cold wall reactor using a pyrolytic graphite heater encased in a thin layer of pyrolytic boron nitride, and an Oerlikon-Leybold Turbovac 361 turbomolecular pump. This heater is shown to achieve temperatures greater than 1200°C, as well as reach …
-
Computational Fluid Dynamics (CFD) Study of NASA's Cold-Wall Swirl-Driven Rocket Combustion Chamber
… a numerical simulation of the NASA sponsored cold wall bidirectional vortex chamber (CWBVC). The complex fluid dynamics situation in the vortex chamber is characterized by three-dimensionality, turbulence, and the interactive effects of the physical processes of combustion and heat transfer. …
-
Effects of cold wall quenching on unburned hydrocarbon emissions from a natural gas HPDI engine
The quenching of hydrocarbon flames on cold surfaces is considered to be a potential source of unburned hydrocarbon (UHC) emissions from internal combustion engines, but its contribution to emissions has been difficult to determine due to the strong coupling between physics, chemistry and …
-
Automation and Upgrading of Custom Cold Wall UHV-CVD Reactor for Group IV Material Development
Group IV alloys have shown promising results for infrared optoelectronic applications where III-V materials are currently dominant. The III-V material system has vacancies that Group IV materials can fill, most importantly complementary metal oxide semiconductor (CMOS) process compatibility making …
-
Experimental investigation and theoretical considerations of boundary layer transition of the hemisphere at low wall-to-stagnation temperature ratios
… layer on blunt convex bodies exists when the wall-to-stagnation temperature is lowered. It was found that instability existed and theoretical considerations are given to the transition being associated with the formation of ice on the model surface and with an increase in roughness Reynolds …
-
EXPERIMENTAL INVESTIGATION OF IMPINGED DROPLET DYNAMICS
The fuel spray wall interaction phenomenon plays an essential role in determining the emissions and performance of an internal combustion engine. The investigation of single droplet wall interaction is crucial to understanding of a spray wall impingement process. This report is a compilation of the …
-
The Construction and Operation of a Thermal Diffusion Column
… vertically, the inner one of which was a hot wall and the outer one a cold wall. A temperature gradient was set up radially from the cold wall to the hot wall. Then the convection currents carried the light molecules, concentrating at the hot wall, up the tube and brought the heavier …
-
Radioisotope tracing of metallic deposits near a coaxial plasma gun exhaust
… measure the deposition of a metallic plasma on a cold wall was thenHnvestigated, A series of tests was conducted which demonstrates the feasibility of this tracer method for determination of mass condensation on walls surrounding a high velocity plasma slug.
-
Phosphane and Phosphite Silver(I) Complexes: Synthesis, Reaction Chemistry and their Use as CVD Precursors
… analysis. Silver films could be grown by using a cold-wall CVD reactor. The morphology of the latter films was determined.
-
Development and propagation of premixed and diffusion flames in confined channels
… of the finger flame come in contact with the cold wall, they extinguish and the flame area and flame speed both decrease rapidly. When the side-skirts near the leading edge, the flame flattens to a planar flame. An inward pointing cusp called the “tulip flame” is formed, which retains its …
-
A computational approach to understanding material system : infrared coating of Ni-P on steel
… method for close process control. Since it is a cold-wall technique, the specimen is heated directly and begins cooling immediately when the furnace is shut down. Using infrared processing also allows close control of time and temperature parameters providing the ideal environment for exploring …
-
Experimental and numerical study of premixed flame propagation in a constant volume combustion chamber
… is dissipated either because of quenching by the cold wall or by collision with a flame that has been ignited on the opposite end of the confined channel. phenomena observed include both the formation of concave flame-fronts and oscillating convex-concave flame-fronts. The structure and speed of …
-
A study of heat transfer and inlet flow behavior in molten polymer systems
… of the tube and a peak in temperature near the wall when heating the flowing polymer was observed. When cooling the polymer melt the effect of viscous dissipation was greatly reduced due to the alteration of the velocity profile heat transfer to the cold wall.</p><p>In general aspects the …
-
Low pressure chemical vapor deposition of copper films from CU(I)(HFAC)(TMVS)
… the resulting conformal profile. In this work, a cold wall, single wafer, CVD tungsten reactor was used for the deposition of copper with Cu(I)(hfac)(tmvs). Film growth rates were between 100 to 800 A/min depending on processing conditions, and an Arrhenius type activation energy of 16.1 kcal/mole …
-
Investigation into the growth mechanisms of carbon nanotubes formed using thermal chemical vapour deposition
… that the nucleation density of single-walled carbon nanotubes, formed by thermal catalytic chemical vapor deposition, strongly depends on the grain size of Al catalyst supports covered with a native oxide (Al/Al2O3). By varying the substrate temperature during Al sputter deposition it …
-
Low pressure chemical vapor deposition of tungsten as an absorber for x-ray masks
… film for X-ray absorber. In this work, a cold wall, single wafer, Spectrum 211 CVD reactor was used for the deposition of tungsten from H, and WF6. The growth kinetics were determined as a function of temperature, pressure and flow ratio. The deposition rate of as deposited tungsten films …
-
Numerical Simulation of Three-Dimensional Combined Convective Radiative Heat Transfer in Rectangular Channels
… detail. The fluid with a hot inlet compared to a cold wall was cooled in a relatively short distance from the channel inlet because of the radiation effect. The thermal penetration decreased with a decrease in optical thickness and an increase in scattering albedo. Thermal penetration increased …
-
LPCVD TUNGSTEN MULTILAYER METALLIZATION FOR VLSI SYSTEMS.
… dissertation that, tungsten films deposited in a cold-wall LPCVD reactor offer viable solution to the problems of VLSI multilayer interconnects. Experiments showed that LPCVD tungsten films have good uniformity, high purity, low resistivity, low stress-good adherence and are readily patterned into …
-
Numerical and experimental investigation of convection/diffusion solidification processes using an enthalpy method
… experimental apparatus is built with one copper wall ( cold wall) and other walls made of plexiglass (adiabatic walls). The liquid used for solidification experiments is Caprilic acid. Caprilic acid is used because of its less than ambient melting point 14° C) and low volume reduction upon …
-
Additively Manufactured Titanium Alloy Sandwich Structures for Thermal Protection
… structures were shown to survive maximum cold-wall heat fluxes of 550 kWm−2 and Pitot pressures of 47 hPa for 3 min. However, a liquid oxide film on the front surface was observed to form under these conditions. At higher heat loads, the displacement of this film led to the disintegration …
Page 1 of 3