Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 33 for “"Colloidal Processing"”.
-
Fabrication of organic-inorganic nanocomposites by colloidal processing
Colloidal processing has been widely used for many industrial application. Electrophoretic deposition (EPD) is an important colloidal technique, which plays an important role in the fabrication of organic-inorganic composites. In this work, advanced dispersing agents with excellent adsorption, …
-
Characterization And Aqueous Colloidal Processing Of Tungsten Nano-powders
Extensive attention has been paid to consolidate nanoparticles into nanocrystalline components that possess better properties than their coarse-grained counterparts. Nanocrystalline monolithic tungsten (W) has been envisaged to possess better properties than coarse-grained tungsten and to improve …
-
Colloidal processing of titanium diboride/alumina (TiB₂/Al₂O₃)
Thesis (M.S.)--Michigan State University. Department of Materials and Science Mechanics, 2001
-
Colloidal processing of SiCw/A1₂0₃ ceramic matrix composites
Thesis (Ph. D.)--Michigan State University. Department of Materials Science and Mechanics, 1998
-
COLLOIDAL PROCESSING AND SINTERING OF NARROW-SIZE-DISTRIBUTION SUBMICRON ALUMINA
… powders obtained from different sources were colloidally processed to obtain agglomerate-free and narrow-sized-distribution powder suspensions. They were then compacted by means of centrifuging and slip casting. The compacts exhibited uniform green microstructure and a high green density of 64 …
-
Colloidal Processing of Metal Oxide-Carbon Nanotube Nanocomposite Electrodes for Supercapacitors
… (CNTs). We are developing a novel colloid processing technique to synthesize MnOx-CNT nanocomposites with enhanced electronic conductivity. Our research involves the use of advanced capping agents and co-dispersants to fabricate MnOx-CNTs nanocomposite electrodes that exhibit superior …
-
Colloidal processing of SiC(w)/Si₃N₄ ceramic composites by slip casting
Thesis (M.S.)--Michigan State University. Department of Materials Science and Mechanics, 1996
-
Near-Net Shaping and Additive Manufacturing of Ultra-High Temperature Ceramics via Colloidal Processing
Ceramic colloidal processing routes such as slip casting, gelcasting and direct ink writing provide valuable insight into the role of interaction forces between particles, solvents, and polymeric additives in the rheology, particle packing, and strength of a ceramic green body. For …
-
Colloidal Processing, Microstructural Evolution, and Anisotropic Properties of Textured Ultra-High Temperature Ceramics Prepared Using Weak Magnetic Fields
… the door to renewed investigations into their processing and performance. This work describes in detail for the first time the relationships between processing, microstructure, and properties of a textured UHTC part, providing a model for future research. Finally, the findings in this work can …
-
Single-walled carbon nanotube-silicon nitride composites
Colloidal processing methods were developed in order to disperse highly concentrated 1.0, 2.0, and 6.0 vol% single-walled carbon nantoube (SWNT)-Si 3N4 aqueous composite suspensions. Interparticle pair potentials were developed between individual Si3N4 particles and SWNT bundles by coating them …
-
Mullite Whisker Enhanced Zirconia Toughened Alumina Ceramic Matrix Composite for High Temperature Applications
… and incorporated into the ZTA matrix using a colloidal processing route. The addition of whiskers to ZTA has improved room temperature flexural strength by 120.0%, flexural strength at 1200°C by 53.8%, fracture toughness by 74.1%; but the whiskers have little effect on the hardness. …
-
Rheological properties of aqueous nanometric alumina suspensions
<p>Colloidal processing is an effective and reliable approach in the fabrication of the advanced ceramic products. Successful colloidal processing of fine ceramic powders requires accurate control of the rheological properties. The accurate control relies on the understanding the influences of …
-
INNOVATIVE CERAMIC MATERIALS AND PROCESSES FOR AERONAUTIC APPLICATIONS
… development is limited to few special ceramic processing techniques. These derivatives are α-Sialon and β-Sialon later is easy to fabricate and develop into the components but is very soft, the former is hard and strong and impossible to be synthesized without the use of hot isostatic pressing …
-
Freeze Casting of Aqueous PAA-Stabilized Carbon Nanotube-Al2O3 Suspensions
Freeze casting is a colloidal processing technique that shows great promise for development of nanostructured materials. A ceramic nanopowder is dispersed with a polymer in water, under carefully controlled pH. The suspension is cast into a suitable mold and frozen, then de-molded and exposed to a …
-
Modeling Interactions in Concentrated Ceramic Suspensions Under AC Electric Field
Colloidal processing of ceramics manipulates the interaction forces using additives or external energy field between the suspending particles to fabricate complex structures. Under AC electric field, mutual dielectrophoretic (DEP) forces between particles create particle chaining. Dielectrophoresis …
-
Electrophoretic deposition of primary coat onto investment casting wax patterns
… the work reported in this thesis was to tailor a colloidal processing technique called electrophoretic deposition (EPD) for use within the investment casting shell formation process, where the EPD coating procedure would be used to form the primary ceramic coating on the melt-out substrate. EPD …
-
Colloidal Fabrication of Advanced Oxide Composite Materials for Supercapacitors
… is still a great need for improvement. Two new colloidal processing techniques have been developed to mix chemically synthesized MnO2 and conductive multi-walled carbon nanotubes (MWCNT). The first strategy involved the linking of MnO2 and MWCNT through the formation of a Schiff base. …
-
Obtenção de fitas cerâmicas a base de NiO/CDG via colagem de fitas
… exhibited pseudoplastic behavior, desirable for colloidal processing by tape gluing. The ribbons had a thickness range of 120 and 170 μm, recommended for use in solid oxide fuel cell anodes. The thermogravimetric curves showed total organic output at a temperature of 500 oC The sintering of the …
-
Metal Oxide Nanoparticles Synthesized by Nonthermal Plasma for Electrochemical Applications
Metal oxide nanocrystals can be synthesized by colloidal processing and gas-phase processing routes. High-quality nanocrystals produced by colloidal routes typically have surface ligands. Transport of electrons and ions among nanocrystals is hindered by surface ligand, and degrades related …
Page 1 of 2