Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 65 for “"Columnar grains"”.
-
Static, Cyclic Deformation Responses and Related Micromechanisms of Ni-Carbonyl CVD Material of Bimodal Grain Structures – Columnar Grains with Ultrafine Nano-Twins and Ultrafine-grained Matrix
… bimodal microstructures, i.e. large columnar grains containing ultrafine/nano twins embedded in ultrafine/nano-grain matrix. This dissertation systematically studies the effect of this unique microstructure on the mechanical properties in the following aspects: monotonic and cyclic …
-
A study on Electron Beam Melted Ti-6Al-4V
… of EBM built Ti-6Al-4V in general consist of columnar grains of prior β phase. Inside the columnar grains there is a typical (alpha+beta) microstructure of titanium alloys containing Widmanstätten alpha platelets and rod-shaped β phase. Grain boundary layer has also been observed on the grain …
-
Influence of Energy Density (Fluence) on the Microstructure and Magnetic Properties of Additively Manufactured Soft Magnetic Alloys
… metal powders or wires tend to produce textured columnar grains, which can have positive effects on the magnetic performance of Fe-Si electrical steels in soft magnetic applications. This work focuses on understanding the impact of energy density (fluence) evolution of grain morphology and …
-
Laser metal deposition of the Ti-5553 alloy on forged substrate for aerospace applications
… The microstructure was shown to exhibit large columnar ?-grains oriented with the build direction and columnar dendrites. The laser power was shown to influence both the ?-grain size and crystallographic texture, which varied between a cube and a h001i // BD fibre. The powder feed rate was …
-
Mesoscopic Deformation Behaviour of Inconel 718 Fabricated By The Laser Powder Bed Fusion Process
… is characterized by crystallographic texture and columnar grain structure. The main objective of this thesis is to investigate the effects of grain morphology and crystal orientation on the deformation behaviour of IN718 fabricated by SLM process. Furthermore, since forging is a reliable …
-
Microstructure and properties of transition metal nitride and medium entropy alloy coatings
… in a transformation from a dense structure with columnar grains into a porous structure with equiaxed grains, accompanied by a degradation in mechanical properties. It was shown that intergranular porosity had a detrimental effect on both hardness and elastic modulus. Further, the effect of …
-
MICROSTRUCTURE TAILORING IN ALUMINUM ALLOYS THROUGH SUPPORT STRUCTURES AND IN-SITU ALLOYING APPROACHES IN LASER POWDER BED FUSION
… overcome this challenge by refining the coarse columnar grains typically formed during LPBF solidification. Despite recent progress in the development of inoculated LPBF Al alloys, two important challenges remain. First, most inoculated Al alloys still require post-build heat treatment to …
-
Tuning of Microstructure and Mechanical Properties in Additively Manufactured Metastable Beta Titanium Alloys
… with smaller solidification ranges exhibited columnar grains. Subsequently, the printability of two candidate beta titanium alloys containing eutectoid elements (Fe) that are prone to beta fleck in conventional casting, i.e., Ti-1Al-8V-5Fe (wt%) or Ti-185, and Ti-10V-2Fe-3Al (wt%) or …
-
Microstructure development and weldability of inoculated 6061 processed with gas metal arc directed energy deposition
… microstructural features such as nearly equiaxed grains and an absence of dendritic microsegregation. Although cracking is often eliminated in inoculated alloys, very little work has been done to predict the unique microstructural features or assess weldability of processes that result in crack …
-
Anisotropy and its Influence on a Metal Deposition Structure
… investigations revealed dendritic solidified columnar grains orientated in the build direction, along with evidence that the material has a texture. The mechanical analysis indicate that the stiffness in tangential direction largely controls elastic deformation and that yield strength in the …
-
Additive manufacturing of nickel based superalloys for aerospace applications
… the propensity for the production of equiaxed or columnar grains being strongly influenced by laser power. The texture is correspondingly strongly influenced by changes in processing conditions. The extent of precipitation of the various phases expected in IN718 was also found to be influenced by …
-
Investigation into the Effects of Heat Treatment and Nanoparticles on the Microstructure and Mechanical Properties of LPBF'ed AlSi10MgAlloy
… The nanoparticles helped transform traditional columnar grains, which are prone to solidification cracking, into more equiaxed, strain-tolerant structures. The enhanced strength in as built parts was attributed to grain refinement, dislocation strengthening, and secondary-phase particle …
-
Characterization of ultra-low carbon bainitic steels for use as weld wire consumables
… of the GMA weldments was dominated by columnar grains. SEM and optical fractography suggested that this macrostructure is responsible for the corresponding poor toughness in these weldments. In all weldments the non-metallic inclusions were found to be very small (on average % 0.5 …
-
A Novel Approach to Analyzing Strain Heterogeneity in Polycrystalline Quartz Specimens Deformed at High Pressure and Temperature
… a quartz aggregate made up of stacked columnar grains, to simplify the geometry of the material deforming in the Griggs apparatus. By modifying the traditional sample assembly from cylindrical to parallelepiped, I developed a method to use 2D digital image correlation for strain mapping …
-
Crystal Plasticity Modeling of Heterogeneous Microstructure of Additively Manufactured Metals
… thermal cycles for the solidification process, columnar grains develop. These kind of columnar grain structures are in network and quite common in the additively manufactured metallic materials. These cellular structures have a cell wall with high dislocation density and a cell interior with a …
-
Creep Resistance and Microstructure in Binary Aluminum Cerium Alloy Produced by Laser Powder Bed Fusion
… after creep testing, and the number of columnar grains decreased.
-
An investigation into microstructure and microstructural control of additive layer manufactured Ti-6Al-4V by electron beam melting.
… reveal that solidification occurs in the columnar region - columnar grains are observed experimentally and are a feature of the process. I Observed microstructures indicate a complicated thermal history that is capable of producing diffusion-less and diffusional transformation products. …
-
Energetics and Deformation Response of Random Grain Boundaries in FCC Nickel
… types of samples were utilized: a sample with columnar grains consisting of pure <110> tilt boundaries and a thin-film sample with 3D grain orientations modeled after an experimental sample of austenitic steel. The structure and energies of these random boundaries under stress and temperature …
-
Characterization of diamond thin films and related materials
… no laser there was nucleation of a sub-layer of grains followed by irregular grain growth. An untuned laser wavelength yielded nucleation of a sub-layer then columnar grain growth. The 10.532 μm tuned laser wavelength caused growth of columnar grains"--Abstract, page iv.
-
Microstructural control in Inconel 718 manufactured by laser powder bed fusion
… produces a microstructure that comprises of long columnar grains. This new method exploits lack of fusion and keyhole defects as well as unmelted powder present in the central region of a printed component in order to generate a wide range of microstructures after hot isostatic pressing. As well …
Page 1 of 4