Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 71 for “"Combustion dynamics"”.
-
Combustion dynamics of individual reactive material particles
… Metals are attractive because of their high combustion enthalpies and temperatures. Quantitative descriptions of the combustion processes and mechanisms for both pure metal and composite particles are also desired for their proper implementation in specific applications. Among reactive …
-
Combustion dynamics of metal powders in mixed gas flows
Predictive mechanisms for particle ignition and combustion rates are required in order to develop optimized propellant and energetic formulations using micron-sized metal powders, such as aluminum and magnesium. Most current descriptions are based on laboratory experiments performed in stationary …
-
Swirling fluid mixing and combustion dynamics at supercritical conditions
… is established to study supercritical mixing and combustion over the entire range of fluid thermodynamic states of concern. Turbulence closure is achieved using a large-eddy-simulation (LES) technique. A steady laminar flamelet approach is implemented to model turbulence/chemistry interactions. …
-
Metal Dust Combustion Dynamics & Novel Concepts of Explosion Protection Application
… dusts due to well-documented amplified heat of combustion, burning temperature, flame speed, rate of pressure rise, maximum explosion overpressure, and ignition sensitivity. Addition of non-combustible inert material to combustible dust mixtures, either through pre-mixing or high-rate injection …
-
COMBUSTION DYNAMICS OF BIO-DERIVED, SURROGATE, AND TRANSPORTATION FUEL SYSTEMS
… blends with selected biofuels, as well as the combustion of transportation fuel surrogates. Included are n-butanol, hydrotreated renewable diesel and jet fuels derived from microalgae (AHRD and AHRJ, respectively), and surrogate fuels including iso-octane and mixtures of n-heptane and …
-
A model of coal combustion dynamics in a fluidized bed combustor
<p>A model of coal combustion dynamics in a fluidized bed is developed in this study. The model is carried out on the premise that the total combustion response can be decomposed into two distinct processes: volatile combustion and char combustion. For an impulse in the feed rate of coal, the …
-
Combustion Dynamics And Fluid Mechanics In Acoustically Perturbed Non-premixed Swirl-stabilized Flames.
… process through the introduction of swirl in the combustion reactants is also necessary for flame stabilization. The resulting lean swirling flames are often characterized by a susceptibility to feedback between velocity, pressure and heat release perturbations with a potential for unstable …
-
Experimental and numerical analysis of combustion dynamics and acoustics in atmospheric gas turbine laboratory burners
[ES] La industria se enfrenta a nuevos retos en el diseño de quemadores de turbinas de gas debido a la aparición de estrictas normativas que tratan de reducir sus emisiones de contaminantes (p. ej., NOx, CO2, hollín). Al mismo tiempo, se trata de aumentar el rendimiento térmico de estos motores con …
-
High-fidelity numerical simulation and emulation of bi-fluid swirl injector flow and combustion dynamics
Injectors are critical components of combustion devices in liquid-fueled propulsion systems. By controlling the atomization and mixing of propellants, injectors can affect combustion efficiency, dynamic characteristics, and engine life cycle. This work conducts a comprehensive study of the …
-
Effects of Thermoacoustic Oscillations on Spray Combustion Dynamics with Implications for Lean Direct Injection Systems
… Intuitively, development of effective active combustion control methodologies is strongly dependent on the knowledge of the onset and sustenance of thermoacoustic instabilities. Specially, non-premixed spray combustion environment pose additional challenges due to the inherent unstable …
-
Simulating Bluff-body Flameholders: On the Use of Proper Orthogonal Decomposition for Combustion Dynamics Validation
… of the bluff body stabilized premixed combustion experiment. Large-eddy simulations (LES) using both Fluent and OpenFOAM were conducted to reproduce experiments conducted in an experimental test rig which was built as part of this work to study the behavior of turbulent premixed flames …
-
Common proper orthogonal decomposition-based emulation and system identification for model-based analysis of combustion dynamics
… to capture more salient features of the flow and combustion dynamics in engines, but these computations are often too expensive and time-consuming for design and development purposes. To enable usage of modeling/simulation in the design workflow, the present study proposes a data-driven framework …
-
An Experimental Investigation of Self-Excited Combustion Dynamics in a Single Element Lean Direct Injection (LDI) Combustor
The management of combustion dynamics in gas turbine combustors has become more challenging as strict NOx/CO emission standards have led to engine operation in a narrow, lean regime. While premixed or partially premixed combustor configurations such as the Lean Premixed Pre-vaporized (LPP), Rich …
-
Swirl-stabilized lean-premixed flame combustion dynamics: An experimental investigation of flame stabilization, flame dynamics and combustion instability control strategies
Though modern low-emission combustion strategies have been successful in abating the emission of pollutants in aircraft engines and power generation gas turbines, combustion instability remains one of the foremost technical challenges in the development of next generation lean premixed combustor …
-
COMBUSTION DYNAMICS OF COMPLEX FUEL SYSTEMS: ISO-BUTANOL/HEPTANE MIXTURES, N-PROPYLBENZENE, GASOLINE SURROGATES AND GASOLINE SURROGATE/ISO-BUTANOL MIXTURES FROM THE PERSPECTIVE OF SPHERICAL DROPLET FLAMES
… designed to promote spherical symmetry during combustion. The systems investigated were heptane/iso-butanol, n-propylbenzene, four-component (S4), five-component (S5), and six-component (S6) surrogates for a gasoline certification fuel (indolene), indolene/iso-butanol and S5/iso-butanol blends. …
-
Metal based reactive nanocomposites prepared by cryomilling
… for aluminum as fuel additives to achieve higher combustion temperatures and stronger pressure pulses for applications in advanced munitions systems. Two applications are addressed in this work. In the applications for explosives designed to defeat stockpiles of chemical and biological weapons, it …
Page 1 of 4