Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 68 for “"Combustion engineering"”.

  1. A computer simulation of a naval boiler

    … accessible data. The model was adapted for a Combustion Engineering Type V-2M boiler for analysis.

    nps Repository record for A computer simulation of a naval boiler (opens in a new tab)

  2. Resistance thermometer characteristics and response time testing

    … typical of the type used in Westinghouse and Combustion Engineering pressurized water reactors.</p><p>A mode of possible sensor degradation, i.e., changes in the ceramic cement used in the construction process, was studied with the result being that the cement was a probable candidate for …

    ut-knoxville Repository record for Resistance thermometer characteristics and response time testing (opens in a new tab)

  3. The Modification, Design and Development of a Scaled-down Industrial Furnace with Interchanging Burners for Academic Use

    Industry is heavily dependent on the process of combustion and with a projected rapid increase for the demand of combustion-derived energy it is imperative to expose a new age of engineering professionals to the discipline of combustion engineering. One purpose of this study was to modify an …

    queens Repository record for The Modification, Design and Development of a Scaled-down Industrial Furnace with Interchanging Burners for Academic Use (opens in a new tab)

  4. An alternate high pressure injection system for pressurized-water reactors

    … during an intermediate size cold-leg break in a Combustion Engineering PWR with ICIS is equal to the initial operating temperature of 335°c (636°F). The maximum core average fuel cladding temperature reached during a large size cold-leg break with ICIS is 478°c (893°F). This temperature is …

    must-thes Repository record for An alternate high pressure injection system for pressurized-water reactors (opens in a new tab)

  5. Forward model calculations for determining isotopic compositions of materials used in a radiological dispersal device

    … is a pressurized water reactor (PWR) using Combustion Engineering 14??14 assemblies. Takahama is a PWR using Mitsubishi Heavy Industries 17??17 assemblies. Trino Vercelles is a PWR using non-standard lattice assemblies. The measured isotopic concentrations from all three of the reactors …

    tamu Repository record for Forward model calculations for determining isotopic compositions of materials used in a radiological dispersal device (opens in a new tab)

  6. On inhalation health effects of combustion generated ash aerosol particles

    … inhalation toxicity. PM considered consisted of combustion generated ash particles from (1) coal, (2) coal/municipal sewage sludge (MSS) mixture, (3) MSS burned with natural gas assist, (4) coal/refuse derived fuel (unstaged and staged), (5) residual fuel oil (ROFA), (6) combustion generated zinc …

    arizona-thes Repository record for On inhalation health effects of combustion generated ash aerosol particles (opens in a new tab)

  7. Neutronic Characteristics of Using Zirconium Diboride and Gadolinium in a Westinghouse 17 X 17 Fuel Assembly

    … (ZrB2). Other fuel manufacturers such as Combustion Engineering, Siemens, General Electric, and Framatome incorporate gadolinium directly into the fuel matrix which yields the gadolinium-uranium (Gd2O3 - UO2) integral burnable absorber (IBA) rods. A drawback of burnable absorbers is that …

    south-carolina Repository record for Neutronic Characteristics of Using Zirconium Diboride and Gadolinium in a Westinghouse 17 X 17 Fuel Assembly (opens in a new tab)

  8. Investigation of the dilution effect on laminar flame characteristics in a constant volume combustion chamber

    … reducing emissions, the axial (sequential) stage combustion concept for gas turbine combustors and high exhaust gas recirculation rates for internal combustion engines are gaining in popularity. Despite the air-quality benefits of these technologies, introduction of inert combustion residuals into …

    msu Repository record for Investigation of the dilution effect on laminar flame characteristics in a constant volume combustion chamber (opens in a new tab)

  9. Kinetic and radiative extinctions of spherical diffusion flames

    … high activation energy was adopted to model the combustion reaction. The radiative heat loss rate was described by an optically thin model. Based on which reactant is supplied from the burner and how the inert gas is distributed, four model flames, namely the flames with fuel issuing into air, …

    hawaii Repository record for Kinetic and radiative extinctions of spherical diffusion flames (opens in a new tab)

  10. Computational design, sensitivity analysis and optimization of fuel reforming catalytic reactor

    In this research, the catalytic combustion of methane is numerically investigated using an unstructured, implicit, fully coupled finite volume approach. The nonlinear system of equations is solved by Newton’s method. The catalytic partial oxidation of methane over a rhodium catalyst in one channel …

    utc Repository record for Computational design, sensitivity analysis and optimization of fuel reforming catalytic reactor (opens in a new tab)

  11. High pressure LOx/H₂ rocket engine combustion.

    … pressure of oxygen. It was found that unstable combustion could not be triggered whatsoever with LOx/H₂ propellants at near or supercritical pressure, irrespective of operating conditions. Such findings illustrate that operating near or above the critical pressure of propellants (oxygen) results …

    adelaide Repository record for High pressure LOx/H₂ rocket engine combustion. (opens in a new tab)

  12. Ignition and flameholding in supersonic flow by injection of dissociated hydrogen

    … generated by a plasma torch. The supersonic combustion tests were conducted in a direct-connect mode at atmospheric pressure with either ambient temperature air or burner-heated vitiated air with total temperatures from 1200 to 4000 R. Both semi-freejet and ducted configurations were used. …

    vt Repository record for Ignition and flameholding in supersonic flow by injection of dissociated hydrogen (opens in a new tab)

  13. Acoustic modification of sooting combustion

    Acoustic-combustion interactions have interesting potential as a pollution control technology. Studies by a number of authors have shown it to be effective in reducing emissions of NOx and CO from flames, and suppression of soot in flames has been indicated qualitatively. In order to understand the …

    texas Repository record for Acoustic modification of sooting combustion (opens in a new tab)

  14. Effect of guide vanes on the performance of a diesel engine using higher viscous fuel

    Based on CI combustion theory, higher combustion efficiency can be achieved with HVFs when the fuel is injected into higher in cylinder air turbulence to increase the air-fuel mixing. By comparing between the methods used by worldwide researchers as mentioned earlier and CI engine combustion …

    adelaide Repository record for Effect of guide vanes on the performance of a diesel engine using higher viscous fuel (opens in a new tab)

Page 1 of 4