Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Command shaping"”.

  1. Command Shaping for Vibration Reduction in Nonlinear Cabled Systems

    … problem to address. This thesis proposes to use command shaping techniques to reduce command-induced vibration in two cabled systems, a tower crane and an electrodynamic tethered satellite system in low Earth orbit. Systems containing cables often exhibit important nonlinear dynamics, which …

    gatech Repository record for Command Shaping for Vibration Reduction in Nonlinear Cabled Systems (opens in a new tab)

  2. Two-scale command shaping for feedforward control of nonlinear systems

    This research proposes a two-scale command shaping (TSCS) approach for tailoring control inputs to nonlinear, flexible systems aimed at reducing undesirable residual vibrations. These systems exhibit control complexities not present in traditional linear systems. The TSCS approach employs problem …

    gatech Repository record for Two-scale command shaping for feedforward control of nonlinear systems (opens in a new tab)

  3. A Combined Feedback and Command Shaping Controller for Improving Positioning and Reducing Cable Sway in Cranes

    … flexible in nature, generally responding to commanded motion with oscillations of the payload and hook. The response of these systems to external disturbances, such as wind, is also oscillatory in nature. Often, the oscillations of the hook and payload have undesirable consequences. For …

    gatech Repository record for A Combined Feedback and Command Shaping Controller for Improving Positioning and Reducing Cable Sway in Cranes (opens in a new tab)

  4. Vibration avoidance and contour error compensation in high speed five-axis machine tools using command shaping techniques

    … of the machine. This thesis presents a command shaping module which avoids structural vibrations and improves contouring accuracy in five-axis machine tools. Inertial-induced vibrations of feed drives are avoided by applying a sequence of input shaping impulses on the axis position …

    ubc Repository record for Vibration avoidance and contour error compensation in high speed five-axis machine tools using command shaping techniques (opens in a new tab) Download PDF for Vibration avoidance and contour error compensation in high speed five-axis machine tools using command shaping techniques (opens in a new tab)

  5. Comparison of polynomial profiles and input shaping for industrial applications

    Command shaping creates reference commands that reduce residual vibrations in a flexible system. This thesis examines the use of command shaping for flexible system control in three industrial applications: cam-follower systems, sloshing liquids, and cherrypickers. One common type of command …

    gatech Repository record for Comparison of polynomial profiles and input shaping for industrial applications (opens in a new tab)

  6. Dynamic modelling and control of a flexible manipulator.

    … investigated include feedforward control using command shaping techniques and combined feedforward and feedback control schemes. A constrained planar single-link flexible manipulator is used as test and verification platform throughout this work. Dynamic model of a single-link flexible …

    whiterose Download PDF for Dynamic modelling and control of a flexible manipulator. (opens in a new tab)

  7. Control of Haptic Motors for Intuitive Touch Sensation

    … that captures the electromagnetic effects, and command-shaping control implementation in profile designs. In addition, several user tests are conducted to understand interpretation of profile designs. Finally, a machine-learning-based haptic profile design analysis tool is developed and trained …

    gatech Repository record for Control of Haptic Motors for Intuitive Touch Sensation (opens in a new tab)

  8. Performance enhancement of linear robotic workcell using DSP based control

    … used with the DSP based controller are Input Shaping and also State Feedback. Input Shaping is a Feed Forward strategy for eliminating vibration under certain conditions. In this thesis Input Shaping is applied to the performance enhancement of a linear robot system. Although feedback control …

    njit Repository record for Performance enhancement of linear robotic workcell using DSP based control (opens in a new tab)

  9. Control of Robotic Fixtureless Assembly

    … as an alternate approach, a feedforward Input Command Shaping Method (ICSM) is employed to reduce the vibration. Experimental results confirmed the effectiveness of both control algorithms. The LEC and the ICSM reduced the vibration amplitude by up to 71% and 78%, respectively. In order to …

    mcmaster Repository record for Control of Robotic Fixtureless Assembly (opens in a new tab)

  10. Phase-aware 3D safety planning and recovery for collaborative robot transport under dynamic human interference

    … comfort-aware execution, and a local XY/Z command-shaping layer that acts as a safety filter. Rather than treating safety as simple stop-and-wait behavior, the thesis addresses the more difficult problem of safe recovery when a route that was previously valid becomes invalid during …

    ets-quebec Download PDF for Phase-aware 3D safety planning and recovery for collaborative robot transport under dynamic human interference (opens in a new tab)

  11. Dynamics and control of dual-hoist cranes moving distributed payloads

    … were conducted to investigate the effect input shaping has on the performance of human operators using a dual-hoist bridge crane to transport distributed payloads through an obstacle course. In each study, input shaping significantly improved the task completion time. Furthermore, input-shaping …

    gatech Repository record for Dynamics and control of dual-hoist cranes moving distributed payloads (opens in a new tab)

  12. Dynamic modelling and control of a flexible manoeuvring system.

    … for inducing unwanted vibrations in the system. Command shaping 11 control strategies are developed to reduce motion and uneven mass induced vibrations, produced by the main rotor during the vertical movement around the lateral axis of the TRMS rig. 2-impulse, 3-impulse and 4-impulse sequence …

    whiterose Download PDF for Dynamic modelling and control of a flexible manoeuvring system. (opens in a new tab)

  13. Mobile boom cranes and advanced input shaping control

    … on other types of cranes is called Input Shaping, a command filtering technique that reduces motion-induced vibration in oscillatory systems. This thesis develops a dynamics model for a mobile boom crane and analyzes the difficulty of controlling payload oscillation on a boom crane. Input …

    gatech Repository record for Mobile boom cranes and advanced input shaping control (opens in a new tab)

  14. Operational Performance Enhancement of Human Operated Flexible Systems

    … of operators, which are responsible for issuing commands to the structures, and 2) the dynamic properties of cranes, which influence how the structures respond to issued commands. Accordingly, the operational efficiency of cranes can be influenced by changing both the way that operators issue …

    gatech Repository record for Operational Performance Enhancement of Human Operated Flexible Systems (opens in a new tab)

  15. Dynamics and control of mobile cranes

    … the operational speed of the system. Input shaping is one method that eliminates motion-induced vibrations by intelligently designing the reference command such that system vibration is cancelled. It has been successfully implemented on a number of systems, including bridge and tower cranes. …

    gatech Repository record for Dynamics and control of mobile cranes (opens in a new tab)