Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 73 for “"Common Mode Voltage"”.

  1. Common Mode Voltage Mitigation Strategies Using PWM in Neutral-Point-Clamped Multilevel Inverters

    … in the research and development of multilevel voltage-source inverter-based adjustable speed motor drives (ASDs) as a result of low cost, high reliability power semiconductors. The three-level neutral-point-clamped (NPC) ASD is a popular multilevel inverter used in low and medium voltage …

    marquette Repository record for Common Mode Voltage Mitigation Strategies Using PWM in Neutral-Point-Clamped Multilevel Inverters (opens in a new tab)

  2. A Compact Active Filter to Eliminate Common-Mode Voltage in SVPWM Electric Motor Drives

    … presents an active compensation device for common-mode (CM) voltage elimination in 3-phase space-vector pulse-width-modulated (SVPWM) inverters. The proposed device consists of a single-phase 2-level inverter in the form of an H-bridge which supplies a compensating voltage to the inverter …

    umn Repository record for A Compact Active Filter to Eliminate Common-Mode Voltage in SVPWM Electric Motor Drives (opens in a new tab)

  3. A Fault Tolerant 3-Phase Adjustable Speed Drive Topology with Common Mode Voltage Suppression

    … to semiconductor device faults b) input voltage sags c) motor vulnerability to effects of long leads and d) achieve active minimization of common mode (CM) voltage applied to the motor terminals. These objectives are attained by inclusion of an auxiliary IGBT inverter leg, three auxiliary …

    tamu Repository record for A Fault Tolerant 3-Phase Adjustable Speed Drive Topology with Common Mode Voltage Suppression (opens in a new tab)

  4. COMMON MODE VOLTAGE ELIMINATION IN THREE-PHASE FOUR-LEG INVERTERS UTILIZING PULSE DENSITY MODULATION

    Common mode (CM) electromagnetic interference (EMI) is a phenomenon that negatively affects power electronics to include voltage source inverters. Typically, CM EMI reduction is achieved through passive measures such as CM chokes and passive filters. This thesis research explores removing the need …

    nps Repository record for COMMON MODE VOLTAGE ELIMINATION IN THREE-PHASE FOUR-LEG INVERTERS UTILIZING PULSE DENSITY MODULATION (opens in a new tab)

  5. Modeling and Design of a SiC Zero Common-Mode Voltage Three-Level DC/DC Converter

    … additional features. This converter topology was modeled, simulated, and a hardware prototype constructed for evaluation within a UPS system, although its uses are not limited to such applications. A UPS system is a good example of an application with strict noise requirements which must be …

    vt Repository record for Modeling and Design of a SiC Zero Common-Mode Voltage Three-Level DC/DC Converter (opens in a new tab)

  6. A Space Vector Modulation Scheme for Reduction of Dead-Time Effects on Common Mode Voltage of an Open End Winding Induction Machine

    In recent times, the demand for high voltage and high current rating motor drives for electric vehicles applications has increased. These conditions place a great deal of stress on the semiconductor switches, which are usually based on silicon. Multilevel converters provide an alternative that …

    concordia Download PDF for A Space Vector Modulation Scheme for Reduction of Dead-Time Effects on Common Mode Voltage of an Open End Winding Induction Machine (opens in a new tab)

  7. A Pseudo-Binary Cascaded H-bridge Converter for Solid-State Transformer Applications and Modulation Techniques for the Minimization of the Common-Mode Voltage

    … converters supply or consume power from the low-voltage utility, which impacts the size and efficiency of the system. For example, the recent proliferation of electric vehicles has demanded the rapid installation of dc fast chargers (DCFC) across the country. However, most of the commercial DCFCs …

    vt Repository record for A Pseudo-Binary Cascaded H-bridge Converter for Solid-State Transformer Applications and Modulation Techniques for the Minimization of the Common-Mode Voltage (opens in a new tab)

  8. SVPWM Technique with Varying DC-Link Voltage for Common Mode Voltage Reduction in a Matrix Converter and Analytical Estimation of its Output Voltage Distortion

    Common Mode Voltage (CMV) in any power converter has been the major contributor to premature motor failures, bearing deterioration, shaft voltage build up and electromagnetic interference. Intelligent control methods like Space Vector Pulse Width Modulation (SVPWM) techniques provide immense …

    umn Repository record for SVPWM Technique with Varying DC-Link Voltage for Common Mode Voltage Reduction in a Matrix Converter and Analytical Estimation of its Output Voltage Distortion (opens in a new tab)

  9. CONTROL METHODS TO MITIGATE COMMON MODE EMI AND REDUCE SWITCHING LOSSES IN GRID-CONNECTED INVERTERS

    Three-phase four-leg voltage source inverters that use pulse density modulation achieve simultaneous commutation of the switching devices on each inverter leg. This switching scheme should result in the elimination of common mode voltage within the circuit; however, the presence of dead-time during …

    nps Repository record for CONTROL METHODS TO MITIGATE COMMON MODE EMI AND REDUCE SWITCHING LOSSES IN GRID-CONNECTED INVERTERS (opens in a new tab)

  10. Design of a Hybrid Unipolar Modulation Dual-Buck Inverter using Wide Bandgap Devices

    Common mode performance is important for photovoltaic applications where the common mode voltage can become hazardous to people near the solar installation and can cause reliability concerns in inverters. The proposed dual-buck inverter uses hybrid unipolar modulation and a topology that is …

    vt Repository record for Design of a Hybrid Unipolar Modulation Dual-Buck Inverter using Wide Bandgap Devices (opens in a new tab)

  11. Analysis and design of matrix converters for adjustable speed drives and distributed power sources

    … limited because of some practical issues such as common mode voltage effects, high susceptibility to input power disturbances and low voltage transfer ratio. This dissertation proposes several new matrix converter topologies together with control strategies to provide a solution about the above …

    tamu Repository record for Analysis and design of matrix converters for adjustable speed drives and distributed power sources (opens in a new tab)

  12. An investigation into pulse-width modulated AC electric drives with open-end winding machines

    … Also, the PWM inverter generates a switching common-mode voltage at the machine terminals. This causes spurious ground currents and harmful bearing currents through capacitively coupled paths to ground. Conventional ac machines used in electric drives are either star- or delta-connected and …

    umn Repository record for An investigation into pulse-width modulated AC electric drives with open-end winding machines (opens in a new tab)

  13. Space vector pulse-width modulation for multilevel inverters and solution to modulation dependent problems

    … Furthermore, in linear range, maximum obtainable voltage is 90.7% of six-step. It can be increased further by properly utilizing the DC-link capacity through overmodulation. However, the implementation of SVPWM in overmodulation range is even more complex due to the nonlinearities of this region. …

    nus Repository record for Space vector pulse-width modulation for multilevel inverters and solution to modulation dependent problems (opens in a new tab) Download file for Space vector pulse-width modulation for multilevel inverters and solution to modulation dependent problems (opens in a new tab)

  14. Matrix Converter Based Open-end Winding Drives

    … converter is almost always a two- or multi-level voltage source inverter (VSI). The front-end converter may be another VSI, or a line-commutated rectifier. This is a robust architecture that has benefited from extensive use; consequently, the inverter design and control methods are quite standard, …

    umn Repository record for Matrix Converter Based Open-end Winding Drives (opens in a new tab)

  15. Amplificador operacional de transcondutância totalmente diferencial com alta linearidade e circuito de compensação de modo comum

    … with high linearity, based on the Folded Flipped Voltage Follower (FFVF) Topology. This structure was developed and applied on a 3a order low-pass Gm − C filter, based on the Chebyshev’s aproximation with a cutoff frequency of 300 kHz. Besides that, the OTA has low differential offset and it is …

    brazil-uerj Repository record for Amplificador operacional de transcondutância totalmente diferencial com alta linearidade e circuito de compensação de modo comum (opens in a new tab)

  16. DESIGN OF ANALOG VLSI CIRCUIT : A DIFFERENTIAL-IN DIFFERENTIAL-OUT HIGH SPEED, HIGH GAIN OP AMP

    … driving a capacitive load of 5 pF. The undesired common mode gain in the DIDO op amp is very high. Hence commonmode feedback was used to reduce the output common-mode voltage. HSPICE was used for circuit simulations in this project. The transistor model used is the HSPICE Level 28 model. The …

    nus Repository record for DESIGN OF ANALOG VLSI CIRCUIT : A DIFFERENTIAL-IN DIFFERENTIAL-OUT HIGH SPEED, HIGH GAIN OP AMP (opens in a new tab) Download file for DESIGN OF ANALOG VLSI CIRCUIT : A DIFFERENTIAL-IN DIFFERENTIAL-OUT HIGH SPEED, HIGH GAIN OP AMP (opens in a new tab)

  17. Optical isolation of single board computer for use in high electrical noise environments

    … threshold, current transfer ratio, isolation voltage, data rate, common mode rejection, CMOS compatibility, isolation resistance, isolation capacitance, temperature effect and cost.</p><p>A multi-channel optical isolated input/output interface board for 8052AH BASIC SBC is designed. It …

    njit Repository record for Optical isolation of single board computer for use in high electrical noise environments (opens in a new tab)

  18. Design of a High Dynamic Range CMOS Variable Gain Amplifier for Wireless Sensor Networks

    … wide gain variation, small chip area, low supply voltage, and controllable dynamic gain range. The gain variation of the 3-stage VGA is implemented by a voltage to current converter. It controls the bias currents of each VGA cell, so that the output gain of each cell can be controlled. In order to …

    arkansas Repository record for Design of a High Dynamic Range CMOS Variable Gain Amplifier for Wireless Sensor Networks (opens in a new tab)

  19. Power Electronic Solutions for Interfacing Offshore Wind Turbine Generators to Medium Voltage DC Collection Grids

    … deployed in the North, Baltic, and Irish Seas. Modern offshore wind farms are equipped with an electrical system within the farm itself to aggregate the energy from all turbines in the farm before it is transmitted to shore. This collection grid is traditionally a 3-phase medium voltage …

    tamu Repository record for Power Electronic Solutions for Interfacing Offshore Wind Turbine Generators to Medium Voltage DC Collection Grids (opens in a new tab)

  20. Low Voltage Ride-Through for Indirect Matrix Converter Based Open-End Winding Drives

    … recently many electric vehicles (EV). The most commonly employed types are the DC-to-AC or AC-to-AC drives with DC/AC drives being more popular in storage and EV applications. AC/AC drives have been dominated by converters using large capacitors with DC bus viz. back-to-back converters. These …

    umn Repository record for Low Voltage Ride-Through for Indirect Matrix Converter Based Open-End Winding Drives (opens in a new tab)

Page 1 of 4