Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Common Research Model"”.
-
Important Issues for Designing High Lift Common Research Model
… and are not available to the public. Moreover, researchers would like to further investigate about the performance of this vehicle or to evaluate their newly developed CFD code. To fulfil this gap, NASA decided to design and built a model (HL-CRM) of a representative of a transonic civil …
-
Fluid-structure interaction of NASA high speed common research model
… pressure distribution over the wing surface. The model studied is the Common Research Model developed (CRM) by NASA, available in open source on their website [1]. An initial preparation has been necessary in SolidWorks to repair the CAD and then use it in the CFD tools. For the CFD simulation of …
-
EBF3GLWingOpt: A Framework for Multidisciplinary Design Optimization of Wings Using SpaRibs
… structural weight saving. The local panel model is extracted from the global finite element model. The boundary conditions are defined on the edges of local panels using the displacement fields obtained from the global model analysis. The local panels are optimized to satisfy stress and …
-
Use of hybrid airfoil design in icing wind tunnel tests of large scale swept wings
… testing difficult. Hybrid or truncated airfoil models use full-scale leading edges with redesigned aft sections to provide test articles with much reduced model chord and therefore tunnel blockage allowing effectively full-scale icing testing on very large wings. This thesis presents research …
-
A Computational Evaluation of Transonic Wind Tunnel Wall Interference on High Aspect Ratio Models in the Arnold Engineering Development Complex 16 Foot Transonic Tunnel
… section wind tunnel is the interaction of the model flow field and the test section walls. If high quality aerodynamic data is required for the system under test it is necessary to determine the impact of the test section walls on the flow field around the model. A parametric study was …
-
Coupled Boundary Conditions for Modeling Airbreathing Engines
Modeling the flight conditions of an aircraft that utilizes an airbreathing propulsion system necessitates a method to account for the increase in energy introduced into the flow. Current methods for modeling engines either assign fixed conditions on flat faces on the intake and exhaust through a …
-
Aerodynamic performance of a classical aircraft winglet: a parametric CFD study
… aircraft winglet performance on the NASA Common Research Model (CRM) half-wing under transonic cruise conditions. Three geometric variables, winglet length, cant angle, and sweep angle, were examined using a structured three-parameter design space consisting of 216 CFD simulations. An …
-
Splitter Plate Design for Side Wall Testing in the Kirsten Wind Tunnel
Half-model and side-wall balance capabilities are being developed for an ongoing High-Lift Common Research Model (CRM-HL) testing campaign at the University of Washington. As part of this effort, a well characterized splitter plate is required to provide a symmetry plane. This thesis outlines the …
-
Effect of Ice Accretion Simulation Fidelity on Low-Reynolds Number Swept-Wing Aerodynamic Performance
… of 0.09, 0.18, and 0.27, respectively, for model angles of attack ranging from -6 to 16. The swept-wing model used was a scaled version of the NASA Common Research Model wing, which is representative of modern commercial airliner. Force balance, oil-flow visualization, fluorescent mini-tuft …
-
Experimental Validation of a Shape Memory Alloy Slat Gap Filler for Airframe Noise Reduction
… a deployable SGF concept for a 1/16th scale NASA Common Research Model articulated wing. During deployment, the SGF experiences significant strain under stowage and deployment loading. Upon retraction, the SGF superelastically recovers its strain to conform to the wing. In the manufacturing …
-
Experimental Validation of a Shape Memory Alloy Slat Gap Filler for Airframe Noise Reduction
… a deployable SGF concept for a 1/16th scale NASA Common Research Model articulated wing. During deployment, the SGF experiences significant strain under stowage and deployment loading. Upon retraction, the SGF superelastically recovers its strain to conform to the wing. In the manufacturing …
-
Experimental Validation of a Shape Memory Alloy Slat Gap Filler for Airframe Noise Reduction
… a deployable SGF concept for a 1/16th scale NASA Common Research Model articulated wing. During deployment, the SGF experiences significant strain under stowage and deployment loading. Upon retraction, the SGF superelastically recovers its strain to conform to the wing. In the manufacturing …
-
Experimental Validation of a Shape Memory Alloy Slat Gap Filler for Airframe Noise Reduction
… a deployable SGF concept for a 1/16th scale NASA Common Research Model articulated wing. During deployment, the SGF experiences significant strain under stowage and deployment loading. Upon retraction, the SGF superelastically recovers its strain to conform to the wing. In the manufacturing …
-
Experimental Validation of a Shape Memory Alloy Slat Gap Filler for Airframe Noise Reduction
… a deployable SGF concept for a 1/16th scale NASA Common Research Model articulated wing. During deployment, the SGF experiences significant strain under stowage and deployment loading. Upon retraction, the SGF superelastically recovers its strain to conform to the wing. In the manufacturing …
-
Experimental Validation of a Shape Memory Alloy Slat Gap Filler for Airframe Noise Reduction
… a deployable SGF concept for a 1/16th scale NASA Common Research Model articulated wing. During deployment, the SGF experiences significant strain under stowage and deployment loading. Upon retraction, the SGF superelastically recovers its strain to conform to the wing. In the manufacturing …
-
Exploration of turbulent separation over a CRM-HS model in a large scale wind tunnel
The turbulent separated flow on a 4% High-Speed Common Research model (CRM- HS) configuration was studied using particle image velocimetry (PIV) in Kirsten Wind Tunnel (KWT) at the University of Washington without the nacelle/pylon group. The experiments were conducted for a range of Reynolds …
-
Acceleration Techniques for Industrial Large Eddy Simulation with High-Order Methods on CPU-GPU Clusters
… on LES benchmark cases. On the High-Lift Common Research Model case for the 2021 4th AIAA High-Lift Prediction Workshop, both GPU implicit time methods provide an additional speedup of 14 and 68, respectively, over the GPU explicit time simulation.
-
Improvement of subsonic wall corrections in an industrial wind tunnel
The National Research Council 5ft Trisonic Wind Tunnel enables testing of half-span models at a high Reynolds number cost effectively, however there is the possibility of experiencing relatively larger wall-interference effects compared to full span tests. Subsonic wall-interference effects due to …
-
Exploration of stall dynamics on a high-speed CRM wing
… a 4% scale, half-span, high-speed version of the Common Research Model (CRM-HS). A range of Reynolds numbers and angles of attack were examined using a combination of tuft flow-visualization and Particle Image Velocimetry (PIV) in the 8 ft by 12 ft Kirsten Wind Tunnel (KWT) at the University of …
-
An Adjoint Approach to Aerodynamic Shape Optimization for Unsteady Flows with Application to Laminar and Transonic Turbulent Flows
… at a fixed mean lift coefficient using the NASA Common Research Model wing-only geometry. These preliminary optimization results showed that the optimization framework is capable of solving such a design problem, thus enabling such an optimization framework to include buffet conditions considered …
Page 1 of 2