Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 64 for “"Common-mode (CM)"”.

  1. A 10 kV SiC MOSFET Power Module with Optimized System Interface and Electric Field Distribution

    … electric-field (E-field) distribution, minimized common-mode (CM) parasitic capacitance, and reduced system-level parasitic inductances. The proposed approach encompasses two innovative techniques: 1) an electric-potential-oriented module-system interface to reduce system-level parasitic …

    arkansas Repository record for A 10 kV SiC MOSFET Power Module with Optimized System Interface and Electric Field Distribution (opens in a new tab)

  2. Separation of the common-mode and the differential-mode conducted electromagnetic interference noise

    … which can be used to decipher the differential-mode (DM) noise and the common-mode (CM) noise from the total noise. A noise separator hardware is built and tested. The results show that at least 50 dB rejection to either DM or CM noise is achieved for frequency ranging from 10 KHz to 30 MHz. …

    vt Repository record for Separation of the common-mode and the differential-mode conducted electromagnetic interference noise (opens in a new tab)

  3. ELECTROMAGNETIC INTERFERENCE CHARACTERIZATION AND MITIGATION IN A CLLC-BASED DC TRANSFORMER

    … can reduce EMI, which in turn allows for smaller common-mode (CM) filters. This thesis builds upon previous research on the CLLC dc-dc converter (DCX) by presenting new experimental EMI measurements on three different DCX architectures operating at a higher switching frequency than the initial …

    nps Repository record for ELECTROMAGNETIC INTERFERENCE CHARACTERIZATION AND MITIGATION IN A CLLC-BASED DC TRANSFORMER (opens in a new tab)

  4. COMMON MODE VOLTAGE ELIMINATION IN THREE-PHASE FOUR-LEG INVERTERS UTILIZING PULSE DENSITY MODULATION

    Common mode (CM) electromagnetic interference (EMI) is a phenomenon that negatively affects power electronics to include voltage source inverters. Typically, CM EMI reduction is achieved through passive measures such as CM chokes and passive filters. This thesis research explores removing the need …

    nps Repository record for COMMON MODE VOLTAGE ELIMINATION IN THREE-PHASE FOUR-LEG INVERTERS UTILIZING PULSE DENSITY MODULATION (opens in a new tab)

  5. Analys och implementering av EMI-reducerande tekniker i DC/DC-omvandlare

    … (EMC) continue to rise. DC-DC converters are a common source of electromagnetic interference (EMI) in many applications, particularly in automotive and industrial environments. This study aims to analyze and implement techniques to reduce conducted EMI in a buck converter. While the requirements …

    chalmers Repository record for Analys och implementering av EMI-reducerande tekniker i DC/DC-omvandlare (opens in a new tab)

  6. A Compact Three-Phase Multi-stage EMI Filter with Compensated Parasitic-Component Effects

    … are adopted to attenuate the high frequency common mode (CM) and differential mode (DM) noise through the propagation path. However, self and mutual parasitic components are known to degrade the EMI filter performance. While parasitic cancellation techniques have been discussed at length in …

    vt Repository record for A Compact Three-Phase Multi-stage EMI Filter with Compensated Parasitic-Component Effects (opens in a new tab)

  7. Common mode elimination in GaN three-phase four-leg inverters and the performance comparisons with traditional Si inverters using multiple modulation strategies.

    … a novel wide bandgap four-leg inverter with common mode (CM) voltage elimination implemented using a Typhoon HIL 402 as the system-level controller. The four-leg inverter is built using GaN devices to minimize the switching losses and is controlled through pulse density modulation (PDM), and …

    baylor Repository record for Common mode elimination in GaN three-phase four-leg inverters and the performance comparisons with traditional Si inverters using multiple modulation strategies. (opens in a new tab)

  8. A Compact Active Filter to Eliminate Common-Mode Voltage in SVPWM Electric Motor Drives

    … presents an active compensation device for common-mode (CM) voltage elimination in 3-phase space-vector pulse-width-modulated (SVPWM) inverters. The proposed device consists of a single-phase 2-level inverter in the form of an H-bridge which supplies a compensating voltage to the inverter …

    umn Repository record for A Compact Active Filter to Eliminate Common-Mode Voltage in SVPWM Electric Motor Drives (opens in a new tab)

  9. ELECTROMAGNETIC INTERFERENCE MITIGATION BY BALANCING THE RESONANT TANK OF A CLLC SOLID-STATE TRANSFORMER

    … the CLLC resonant tank designed to produce zero common mode (CM) voltage, thus reducing conducted electromagnetic emissions. In contrast, the traditional EMI mitigation method requires additional bulky passive filters. This novel design proposition would save weight and space, which are at a …

    nps Repository record for ELECTROMAGNETIC INTERFERENCE MITIGATION BY BALANCING THE RESONANT TANK OF A CLLC SOLID-STATE TRANSFORMER (opens in a new tab)

  10. Optical and Electrical Interfaces for Biological Structures

    … SPAD image array I developed in a 180 nm HV CMOS process for single-molecule localization super-resolution microscopy (SRM). This image array has a maximum frame rate of 80 MHz and a fill factor of 17.4 %. To demonstrate SRM with this imaging array, we localized gold nanoparticle displacement …

    boise Repository record for Optical and Electrical Interfaces for Biological Structures (opens in a new tab)

  11. Evaluation and Analysis on the Effect of Power Module Architecture on Common Mode Electromagnetic Interference

    … experimentally. A time domain LTspice simulation model of the experimental test setup is then built. The common mode (CM) EMI emissions that escape the baseplate of the module into the converter is then examined through the simulation. The simulation is used to explore the CM noise footprint of …

    vt Repository record for Evaluation and Analysis on the Effect of Power Module Architecture on Common Mode Electromagnetic Interference (opens in a new tab)

  12. Frequency Domain Conductive Electromagnetic Interference Modeling and Prediction with Parasitics Extraction for Inverters

    … dissertation is to focus on the development of modeling and simulation methodology to predict conductive electromagnetic interference (EMI) for high power converters. Conventionally, the EMI prediction relies on the Fast Fourier Transformation (FFT) method with the time-domain simulation result …

    vt Repository record for Frequency Domain Conductive Electromagnetic Interference Modeling and Prediction with Parasitics Extraction for Inverters (opens in a new tab)

  13. POWER QUALITY CONTROL AND COMMON-MODE NOISE MITIGATION FOR INVERTERS IN ELECTRIC VEHICLES

    … the control impact on the inverter differential-mode (DM) and common-mode (CM) performance are not well investigated. With the wide-band gap (WBG) device era, the switching capability of power electronics devices drastically improved. The DM/CM impact that was brought by the WBG device-based …

    utk-theses Repository record for POWER QUALITY CONTROL AND COMMON-MODE NOISE MITIGATION FOR INVERTERS IN ELECTRIC VEHICLES (opens in a new tab)

  14. Modeling and analyzing parasitic parameters in high frequency converters

    … are investigated for the optimization. The models and results are verified by 3D-FEM and experimental results for several given scenarios. Furthermore, the EMC modeling and conducted EMI analysis are developed for a system including an AC-DC-DC power supply (rectifier and dual active bridge …

    must-thes Repository record for Modeling and analyzing parasitic parameters in high frequency converters (opens in a new tab)

  15. Passive Cancellation of Common-Mode Electromagnetic Interference in Switching Power Converters

    It is well known that common-mode (CM) conducted electromagnetic interference (EMI) is caused by the common-mode current flowing through the parasitic capacitance of transistors, diodes, and transformers to ground in the power circuit. Because of the potential for interference with other systems as …

    vt Repository record for Passive Cancellation of Common-Mode Electromagnetic Interference in Switching Power Converters (opens in a new tab)

  16. Current-Transformer Based Gate-Drive Power Supply With Reinforced Isolation

    … CI/O is designed less than 2 pF to mitigate the Common-Mode (CM) noise. A circuit topology analysis is performed and the inductor/capacitor/capacitor/inductor (LCCL) – inductor/capacitor (LC) circuit is selected. This circuit allows Zero-Voltage Switching (ZVS) at full operation range. A …

    vt Repository record for Current-Transformer Based Gate-Drive Power Supply With Reinforced Isolation (opens in a new tab)

  17. Electromagnetic Interference and Compatibility within SiC-based Medium Voltage Converters

    … are not guaranteed to work without issues. Modern power converters consist of numerous auxiliary circuits within the converter to achieve sophisticated functionalities such as sensing, communication, fault detection, signal processing, etc. To ensure reliable operation, these auxiliary …

    vt Repository record for Electromagnetic Interference and Compatibility within SiC-based Medium Voltage Converters (opens in a new tab)

  18. Comprehensive analysis of filter inductor asymmetry on conducted emissions in buck and boost converters

    … of elevated EMI profiles and higher magnitude CM currents, which cause challenges in fielded systems. Therefore, there is an increasing need to model the CM behavior for these systems and provide efficient EMI mitigation techniques. A method to decompose a system’s mixed-mode (MM) behavior into …

    alabama Repository record for Comprehensive analysis of filter inductor asymmetry on conducted emissions in buck and boost converters (opens in a new tab)

  19. In-home PLC to DSL Interference Characterization and Mitigation

    … solution, this thesis proposes to use the common mode (CM) signal, which contains information about the electromagnetic interference (EMI), to estimate and subtract the differential mode (DM) PLC-to-DSL interference from the DM DSL signal. Since the PLC-to-DSL interference environment …

    calgary Repository record for In-home PLC to DSL Interference Characterization and Mitigation (opens in a new tab)

  20. High-Density Discrete Passive EMI Filter Design for Dc-Fed Motor Drives

    … various strategies to reduce both differential mode (DM) and common mode (CM) noise using a passive filter in a dc-fed motor drive. Following a standard approach a baseline filter is first designed to be used as reference to understand and compare the available filter topologies. Furthermore, it …

    vt Repository record for High-Density Discrete Passive EMI Filter Design for Dc-Fed Motor Drives (opens in a new tab)

Page 1 of 4