Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 76 for “"Compact Heat Exchangers"”.

  1. Performance of plate fin compact heat exchangers

    Heat exchangers design includes the consideration of both the heat transfer rates between two fluids and the pumping power required to overcome fluid friction and push the fluids through the heat exchangers. In gas flow heat exchangers, the friction power limitations force the designer to select …

    unlv Repository record for Performance of plate fin compact heat exchangers (opens in a new tab) Download PDF for Performance of plate fin compact heat exchangers (opens in a new tab)

  2. Towards Improved Understanding and Modelling of Compact Heat Exchangers

    … to improve numerical modelling capabilities for Compact Heat Exchangers (CHE). This goal is achieved by numerically and experimentally studying the small scales of flow, then in- corporating these results into a novel reduced order model (ROM) of a full heat exchanger. The result is a numerically …

    waterloo Repository record for Towards Improved Understanding and Modelling of Compact Heat Exchangers (opens in a new tab)

  3. Modelling and analysis of gyroid-based compact heat exchangers

    … Systems (TMS) must content with both external heating and internal heat loads. To meet these challenges, TMS rely heavily on Compact Heat Exchangers (CHEs). This thesis explores the design and performance of gyroid-based CHEs. Enabled by advances in Additive Manufacturing (AM), gyroid …

    whiterose Download PDF for Modelling and analysis of gyroid-based compact heat exchangers (opens in a new tab)

  4. Performance evaluation of louvered fin compact heat exchangers with vortex generators

    Every day large amounts of heat are transferred in many industrial and domestic processes. This heat transfer takes place in a heat exchanger. Any energy savings in heat transfer processes have a significant impact on the fuel consumption and greenhouse gas emissions. More energy efficient heat …

    ghent Repository record for Performance evaluation of louvered fin compact heat exchangers with vortex generators (opens in a new tab)

  5. Steady state stream to air testing facility for compact heat exchangers

    A compact heat exchanger testing facility was constructed at the United States Naval Postgraduate School. The testing facility is used to collect heat transfer and friction factor data by the steady state steam to air technique. Heat exchangers with frontal dimensions of up to 12 inches by 12 …

    nps Repository record for Steady state stream to air testing facility for compact heat exchangers (opens in a new tab)

  6. Experimental evaluation of several high performance surfaces for compact heat exchangers

    In this report, the basic heat transfer and isothermal flow friction characteristics for five perforated nickel matrices, one perforated nickel fin with solid splitter matrix, and one solid nickel matrix, all of "parallel plate" configuration are presented. In addition, similar information is …

    nps Repository record for Experimental evaluation of several high performance surfaces for compact heat exchangers (opens in a new tab)

  7. Practical Applications of Delta Winglets in Compact Heat Exchangers with Louvered Fins

    Compact heat exchangers are widely used by the automotive industry in systems that cool engine components. Louvered fin heat exchangers are used over their continuous fin counterparts because of the significant advantages they provide in heat transfer efficiency, while only causing small increases …

    vt Repository record for Practical Applications of Delta Winglets in Compact Heat Exchangers with Louvered Fins (opens in a new tab)

  8. A numerical study of flow and heat transfer in compact heat exchangers

    … method for the calculations of flow and heat transfer in compact heat exchangers is developed in collaboration with the National Center for Supercomputing Applications. In this method, the unsteady Navier-Stokes and energy equations are solved. A linearly scalable performance of the code …

    uiuc Repository record for A numerical study of flow and heat transfer in compact heat exchangers (opens in a new tab)

  9. Spatially Resolved Heat Transfer Studies in Louvered Fins for Compact Heat Exchangers

    … the mechanisms that serve to increase heat transfer provides valuable knowledge to minimize the size and maximize the performance of compact heat exchangers. This document presents a detailed experimental heat transfer study of six scaled up louvered fin geometries that are typical of …

    vt Repository record for Spatially Resolved Heat Transfer Studies in Louvered Fins for Compact Heat Exchangers (opens in a new tab)

  10. Impact of alternative refrigerants on evaporator design and analysis of compact heat exchangers

    … on the thermal design parameters of different heat exchangers, such as, plate fin and tube, shell and tube evaporator and compact heat exchangers. A computer code has been developed in Quick-Basic language to conduct this investigation.

    utc Repository record for Impact of alternative refrigerants on evaporator design and analysis of compact heat exchangers (opens in a new tab)

  11. Heat Transfer Measurements and Optimization Studies Relevant to Louvered Fin Compact Heat Exchangers

    A compact heat exchanger is a device used to transfer thermal energy between two or more fluids. The most extensive use of compact heat exchangers occurs in the commercial trucking industry. Most compact heat exchanger designs contain tubes carrying one fluid and external fins through which passes …

    vt Repository record for Heat Transfer Measurements and Optimization Studies Relevant to Louvered Fin Compact Heat Exchangers (opens in a new tab)

  12. Development of novel tapered pin fin geometries for additive manufacturing of compact heat exchangers

    … are widely used to enhance forced convection heat transfer across various industries, finding application in turbine blade trailing edges, electronics cooling, and broadly for compact heat exchange. Fin shape greatly affects flow separation and turbulence generation, and optimizing performance …

    texas Repository record for Development of novel tapered pin fin geometries for additive manufacturing of compact heat exchangers (opens in a new tab)

  13. Heat transfer and condensation of water vapour from humid air in compact heat exchangers

    … thesis, an experimental and simulation study of heat transfer in water-to-air compact-plate heat exchanger is presented. A compact-plate heat exchanger made of polypropylene, in which flow pattern is maintained as counter-current, was constructed to conduct the experiments. Experiments were …

    vu-aus Download PDF for Heat transfer and condensation of water vapour from humid air in compact heat exchangers (opens in a new tab)

  14. Flow and heat transfer optimization in ultra- compact heat exchangers enabled by additive manufacturing

    … thesis investigates the optimization of flow and heat transfer in ultra-compact heat exchangers through the use of additive manufacturing (AM) techniques. The study begins with an analysis of Internal Longitudinal Fins Channels (ILFC) and Central Inclined Finned Channels (CIFC). While ILFC …

    oxford Repository record for Flow and heat transfer optimization in ultra- compact heat exchangers enabled by additive manufacturing (opens in a new tab)

  15. Numerical Investigation of Thermal Hydraulic Behavior of Supercritical Carbon Dioxide in Compact Heat Exchangers

    … work seeks to investigate the thermal hydraulic (heat transfer and fluid dynamics) behavior of supercritical (Sc) fluids at both the fundamental and applied levels. The thermal hydraulics of these fluids is not very well known although they have been used in various applications. There are drastic …

    tamu Repository record for Numerical Investigation of Thermal Hydraulic Behavior of Supercritical Carbon Dioxide in Compact Heat Exchangers (opens in a new tab)

  16. The optimal hydraulic diameter of semicircular and triangular shaped channels for compact heat exchangers

    All heat pump cycles have one common feature that connects them to one another; this feature is the presence of a heat exchanger. There are even some heat-driven cycles that are completely composed of heat exchangers, every heat exchanger fulfilling a different, though critical role. The need …

    nwu-za Repository record for The optimal hydraulic diameter of semicircular and triangular shaped channels for compact heat exchangers (opens in a new tab)

  17. Horizontal Two-Phase Flow of Air-Water Mixtures in Small Diameter Tubes and Compact Heat Exchangers

    … flow. Also, the flow patterns that exist in a Compact Heat Exchanger were determined in order to verify or refute the assumption that the flow pattern that exists in the Compact Heat Exchanger is an intimate mixture of the two phases with both the gas and the liquid travelling at the same …

    uiuc Repository record for Horizontal Two-Phase Flow of Air-Water Mixtures in Small Diameter Tubes and Compact Heat Exchangers (opens in a new tab)

  18. Influence of Alumina Addition to Aluminum Fins for Compact Heat Exchangers Produced by Cold Spray Additive Manufacturing

    … flow passages width and fins geometric details. Heat transfer and pressure tests were carried out using different ranges of appropriate Reynolds numbers for the sought commercial application to compare each fin array and determine the effect of alumina content. It was found that the presence of …

    ottawa-retro Repository record for Influence of Alumina Addition to Aluminum Fins for Compact Heat Exchangers Produced by Cold Spray Additive Manufacturing (opens in a new tab)

  19. Enhancing the heat transfer performance of compact heat exchangers by minimizing the contact resistance between fins and tubes

    … phenomena. It plays a significant role in heat transfer applications such as electronic packaging and nuclear reactors. This parameter also appears in fin-tube heat exchangers; however, it is often neglected in the performance calculations of heat exchangers. This thesis project explores …

    unsw Repository record for Enhancing the heat transfer performance of compact heat exchangers by minimizing the contact resistance between fins and tubes (opens in a new tab)

Page 1 of 4