Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 166 for “"Compact Tension"”.
-
STRESS INTENSITY FACTOR DETERMINATION OF CHEVRON NOTCHED COMPACT TENSION SPECIMEN
… and experimentally. In this project, a modified compact tension specimen with a chevron notch was studied for use as a fracture toughness test specimen. The Boundary Integral .Equation (BIE) method was used to compute the displacement field of chevron notch crack face for various crack lengths. …
-
CTOD and COD measurements on compact tension specimens of different thicknesses
Thesis (M.S.)--Michigan State University. Department of Mechanical Engineering,
-
The Ductile-Brittle Fracture Transition: A Comparison of Macro and Microscopic Observation on Compact Tension Specimens
… cases to be of questionable validity.</p> <p>Compact tension specimens of variable thickness were fabricated from annealed 01 tool steel between 0.125 inch and 1.00 inch. Load-COD data and gross plastic flow measurements are compared to scanning electron microscopy (SEM) fracture surface …
-
Effect of Sample Size on Linear Elastic Fracture Toughness of FFF-Processed PLA Compact Tension Specimens
… Elastic Fracture Toughness of FFF-Processed PLA Compact Tension Specimens" investigates the impact of sample size on the fracture toughness of 3D printed Polylactic Acid (PLA) using Fused Filament Fabrication (FFF) technology. ASTM D5045 standard is widely recognized and employed as a benchmark …
-
An experimental study of three-dimensional strain around coldworked holes and in thick compact tension specimens
Thesis (Ph. D.)--Michigan State University. Department of Metallurgy, Mechanics and Materials Science, 1982
-
Experimental evaluation of monotonic and cyclic fracture behavior using disk-shaped compact tension test and released energy approach
… and cyclic loading using the disk-shaped compact tension (DC(T)) test and a released-energy based approach. The standard DC(T) test was revised to facilitate both monotonic and cyclic loading tests, including some modifications of the test geometry and testing modes. The research was …
-
Failure of Notched Stiffened Structures Under Tension
… of the modelling method. Stiffened over-height compact tension (OCT) specimens made from Hexcel IM7/8552 pre-preg were designed and manufactured to experimentally determine the fracture behaviour and damage mechanism. Compact tension and extended single-edge notched tension (ESET) specimens made …
-
Crack growth resistance in nuclear graphite
… a fine grained graphite. Both 3-point bend and compact tension specimens are used. The fine-grain graphite shows lowest resistance, with the coarse-grained materials displaying similar R-curves. The compliance method is simplest but assumes the material is linear elastic, producing similar …
-
Interfacial strength development in thermoplastic resins and fiber-reinforced thermoplastic composites
… resin samples. These included an interfacial tension test based on the ASTM tensile adhesion test (ASTM D897) and a fracture toughness test using a compact tension (CT) specimen (based on the ASTM toughness test for metals ASTM E399-83). The interfacial tensile test proved to be very difficult …
-
Prediction of surface flaw propagation in finite plates
… crack growth rate data from tests performed on compact tension specimens. This data is then used to analyze fatigue growth for surface flaws. A computer program is written to calculate flaw life predictions which are then compared to values of flaw life determined experimentally.
-
Vliv geometrie vzorku na úroveň zavíracího napětí před čelem únavové trhliny
… dvou odlišných únavových vzorků, a to vzorků „compact tension specimen“ a „center cracked plate tension specimen“, s použitím nelineárního materiálového modelu. Modelování celého jevu je prováděno pomocí metody konečných prvků v programovacím jazyku, APDL, programu Ansys. První část práce se …
-
Fracture energy and tensile behavior of concrete
… Three types of test specimen, dog- bone shaped tension specimen, notched beam and compact tension specimen, were investigated. These tests were conducted using the closed-loop MTS 810 strain-controlled testing system. For the uniaxial tension specimen (dog- bone), monotonic and cyclic loadings …
-
The effect of residual stress on fatigue crack growth
… to predict the residual stress distribution in compact tension specimens cut from the pipe and is subsequently used to separate the effect of residual stress and microstructure on fatigue crack growth rates. A methodology is proposed to account for compressive residual stresses, which is …
-
A comparison between two methods of fatigue lifetime predictions for random loads
… reality. The test procedure used subjected compact tension specimens to randomly selected block loads, then compared the actual lifetimes obtained by experiment to the lifetimes predicted by the methods. A statistical analysis was attempted to determine which method was superior. The results …
-
Residual Stress Measurement on Different Length Scales Using Neutron and Synchrotron X-ray Diffraction
… was employed in two fine-grained A1-5091 compact tension (CT) specimens, with both the samples having a fatigue crack of 10mm where one of them was subjected to a 100 % overload after the fatigue crack was grown. The results show the presence of significant triaxial tensile stresses in …
-
Low Temperature Investigations on Asphalt Binder Performance - A case study on Highway 417 Trial Sections
… tensile stress ductilometer (Petrotest DDA3®), compact tension test (Instron AsphaltPro®), double-edge-notched tension and single-edge-notched tension (MTS 810 universal testing machine) protocols. The objective of this study entails establishing and developing of a proper procedure for the …
-
An experimental investigation of mixed-mode fracture I/II/III of PMMA and aluminium 7075-T6
… included fracture testing of 180 pre-cracked compact tension specimens.
-
Analysis of acoustic emission waveforms from fatigue cracks on a steel bridge hanger
… were detected. AE was monitored from A588 compact tension specimens under variable amplitude tension-tension fatigue loading, results of which were used to aid in the interpretation of AE data from the hanger. Crack growth AE were detected only on overload cycles mostly above 92% of maximum …
-
Characterisation of creep and creep crack growth properties in a novel heat resistant steel
… geometry, i.e., circumferentially notched tension (ring-notched) test-piece geometry, to compare to the results from compact tension geometry that have been established in a previous study. Additionally, similar microstructural characterisation and mechanic tests have been conducted on …
Page 1 of 9